Carburetor repair set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10. Without carburettor jets.
for Citroën 2CV6
2756 Articles | Page 53 of 56
Carburettor repair kit for oval carburettor (with carburettor jets), for Citroen 2CV6 ( up to year
1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump, carburettor jet stage 2 (110 + 125), jet idle, CO regulating screw. Made in Europe
Carburettor repair kit for oval carburettor (without carburettor jets), for Citroen 2CV6 ( up to
year 1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump
Carburettor repair kit for oval carburettor. Suitable for Citroen 2CV6, AMI8, Dyane 6, Mehari
Carburettor Solex: 26/35 CSIC + 26/35 SCIC. With this set, the original carburettor can be repaired (of course you need expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
Carburettor repair kit for round carburettor. Suitable for Citroen 2CV6, AMI8, Dyane 6, Mehari
Carburettor Solex: 34 PICS. With this set, the original carburettor can be repaired (of course, this requires expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
Carburettor cover gasket for 2CV6 with oval carburetor. Carburetor type Solex 26/35 SCIC. The
carburetor was mounted starting from about 1985.
Carburettor cover gasket oval, Citroen AMI8, Dyane 6, 2CV6. Carburetor Solex 26/35 CSIC. Please
compare accurately the drawing whether the seal fits!
Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic
car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.
Seal under carburetor lightly, seal between distance plate and carburetor. Suitable for Citroen
2CV6 with oval carburetor. Quality after production from Europe.
Seal under carburetor, distance plate between intake manifold and carburetor. Suitable for Citroen
2CV to year of construction 1981, with round carburetor. Inside diameter 34mm. Made in Germany
Carburettor base gasket, spacer plate between intake manifold and carburettor. Suitable for Citroen
2CV6 with oval carburettor. Made in Germany. Thickness: approx. 9.0 mm. This plate, made in Germany, is manufactured in the same way as the original plate, with many layers of sealing paper soaked in resin and pressed together. There are also many carburettor plates made of plastic on the market, but these do not achieve the same level of insulation.
Seal under carburetor, distance plate between intake manifold and carburetor. Suitable for Citroen
2CV6 with oval carburetor. Reproduction. Thickness: about 9mm.
Seal under carburetor, distance plate. Installed in Citroen 2CV with 375 + 425cc with round
carburetor. Inside diameter 28mm. Or.Nr.: AZ142-98
Latching pin, which is inserted from above into the medium seat slide. Suitable for Citroen 2CV. It
prevents, that slips the seat frame from the seat slide. Or. No. 1A 5437 263K
Guide sleeve in the gearbox, for the connection engine + gearboxes. For 2CV. Measurement
10x14x27,5mm. Very good after production from the European Union.
Motor-gearbox screw connection: Short stud bolts (these are the lower stud bolts) between the motor
and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyanne AMI8, Mehari
Motor-gearbox screw connection: long stud bolts (these are the upper stud bolts, as they also hold
the air filter holder) between the motor and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyane, AK, Ami8
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the left. Suitable for
Citroen 2CV. Made in Germany.
Adjusting lever for the seat lengthwise adjustment, for a seat in front on the right. Suitable for
Citroen 2CV. Made in Germany.
Front axle cover plate on the left, with stud bolt (12mm diameter) for the securement of the shock
absorber. Suitable for Citroen 2CV. Made in Germany.
Front axle cover plate on the right, with stud bolt (12mm diameter) for the securement of the shock
absorber. Suitable for Citroen 2CV. Made in Germany.
Front axle cover sheet. (Cover at the steering gear, below the tie rod securement). Suitable for
Citroen 2CV. Or. No.: A44278A
Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the steering unit). Suitable
for Citroen 2CV. Or.Nr.A44295
Front axle pipe - steering gear in the exchange. Suitable for Citroen 2CV4 + 2CV6. Top outdated
all bearings and pinions are accurately bedded in and measured. The steering worm and the gear rack are re-tooled with grease nipple. To lubricate thus at any time from the outside. 250 euros Old part deposit.
Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
- Suitable for this article
Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
PDF FILE 
2756 Articles | Page 53 of 56
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
