Tail sheet metal on the right down (without cross-beam on the rear side). Suitable for Citroen HY
to year of construction 07/1961. Or. No. HP823-3A
for Citroën HY
1686 Articles | Page 13 of 34
Tail sheet metal on the right, only outer sheet metal. Complete height for a normal Citroen HY
Installed starting from 9/1963.
Tail sheet metal on the right. Mounting for the tail lamps. Suitable for Citroen HY. It is the
external sheet metal, with cross-beams. Length about 600mm.
Tail sheet metal on the right. Mounting for the tail lamps. Suitable for Citroen HY. It is only the
external sheet metal, without cross-beams. Length about 1000mm.
Tail sheet metal on the right. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal fits for the original AXO lights!
Tail sheet metal on the right. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal is without lamp bores for tail lamps.
Tail cable harness, on the left + on the right. Suitable for Citroen HY, short (L1) wheel base
extended rear overhang. For all years of construction. Made in Germany.
Tail cable harness, on the left + on the right. Suitable for Citroen HY, long (L2) wheel base +
extended rear overhang. For all years of construction. Made in Germany.
Tail cable harness, on the left + on the right. Suitable for Citroen HY, normal (C) wheel base. For
all years of construction. Made in Germany.
Rear flap above Citroën HY (small rear window). Reproduction from GRP (synthetic) and metal, also
in-laminated metal hinge! Made one in European Union.
Rear flap above Citroen HY, only outer skin with big window. Reproduction from GRP (synthetic)
Made one in European Union
Rear flap above Citroen HY, only outer skin with small window. Reproduction from GRP (synthetic)
Made one in European Union
Heating hose. Suitable for Citroen HY. Inside diameter: 50,0mm. Length: 1050,0mm. In the Citroen
HY, until year of construction 06/1966, the hose was 880mm long. From the year of construction 7/1966, the hose has been 1020mm long. Please cut to length!
Heater radiator hose 90°. Suitable for Citroen DS + HY (e.g. old version heater radiator). Leg
length about 25mm both sides. Inside diameter about 12-15mm. Or. No. DF642-79
Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Reproduction out of
f painted sheet metal. Or. No. 5403748
Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low
shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.
Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting
spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.
Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for
the roof and door linings.
Hollow bolt for master brake cylinder Citroen 11CV, HY, Peugeot 203. The screw comes at the front
side into the master brake cylinder and takes up the distributor for the brake hoses. Thread 1/2 x 20 UNF. For 15mm connection diameter. Length without bolt head = 29mm.
Cross-beam horizontal at the box body. With bending to in-cement the side plates. 1500mm lengthens
Suitable for Citroen HY.
Cross-beam left, sheet metal under the cab, connection to the chassis cross-beam (horizontal) and
cross-beam under the cab (vertical). Suitable for Citroen HY.
Cross-beam left, under the vehicle floor. At the height of the rear axle. Suitable for Citroen HY
With all reinforcements. Length: approx. 120cm.
Cross-beam on the left, under the complete vehicle floor (total length). Suitable for Citroen HY
(standard wheelbase). With all reinforcements. Dimension: 2460 x 260/180 x 1.5mm
Cross-beam right, sheet metal under the cab, connection to the chassis cross-beam (horizontal) and
cross-beam under the cab (vertical). Suitable for Citroen HY.
Cross-beam right, under the vehicle floor. At the height of the rear axle. Suitable for Citroen HY
With all reinforcements. Length: approx. 120cm.
Cross-beam on the right, under the complete vehicle floor (total length). Suitable for Citroen HY
(standard wheelbase). With all reinforcements. Dimension: 2460 x 260/180 x 1.5mm
Cross-beam repair plate for the horizontal cross-beam on the box body. The plate is fitted in the
defective cross-beam or as a transition if 2 cross-beams are to be joined together. Suitable for Citroen HY. Length: 1000mm
Cross-beam repair plate for the horizontal cross-beam on the box body. The plate is welded over the
defective cross-beam (cover). Suitable for Citroen HY. Length: 1000mm
Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +
800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.
Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.
PDF FILE Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.
1686 Articles | Page 13 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
