for Citroën HY

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high

quality.

• Suitable for this article
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Underbody coating + stone guard to squirt, for underbody protection pistol
  10,81 €
• 
  stone guard MOTIP, colour grey for spray gun, 1000ml
  16,76 €

Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Underbody coating to paint with brush, 1000ml

Vacuum can Ducellier. Suitable for Ducellier distributor, last version for Citroen 11CV, HY

Peugeot 404 + 504. Original from Ducellier, no reproduction (NOS). Ducellier No. 660333

USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large

wide plug) and 1x UBB-C (the new small plugs).

Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8

R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.

Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover

(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.

Valve extractor + lifter (tire valve)

Valve cover gasket from cork. Suitable for Citroen 11CV + Citroen HY, to year of construction

09/1963. Dimension: 44.5 x 15cm. Or. No. 451323

Valve cover gasket Diesel, suitable for engine XD88, XDP88-BD, XDP88-BDS. 1949cc. Installed from

year of construction 1963 to 1975. Suitable for Peugeot 404 D, 504 D, J7 Diesel. Citroen HY Diesel. Or. No. 0249.25

Valve cover gasket Indedor Diesel (1816cc). Suitable for Peugeot of 403 + 404 Diesel. Citroen HY

Diesel. Installed from year of construction 1959 to 1966. Or. No. 0249.17

Valve cover gasket, suitable for Citroen DS, starting from year of construction 1965. Citroen HY

petrol, starting from year of construction 1969 (final version). Citroen CX (first version).

• Suitable for this article
• 
  Sealing rubber (rubber ring) under the valve cap. Seal for the plug body
  1,54 €

Valve cover gasket. Suitable for Citroen DS + HY, to year of construction 7/1961. Citroen 11CV

Citroen U23.

Valve cover gasket. Suitable for Citroen DS, of year of construction 7/1961 to 1966. Citroen HY

The seal is flat and has a circulating edge! Or. No. DS132-4A

• Suitable for this article
• 
  Sealing rubber (rubber ring) under the valve cap. Seal for the plug body
  1,54 €

Valve grinder suction cup. 1x 16+21mm

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

universal valve spring cpmpressor, for the development of the valves + valve springs.

Valve spring set outside + inside (16 fittings). Suitable for Citroen 11CV PERFO + 11D engine

Citroen HY, to year of construction 9/1963. Or. No. 452914. Dimension: 30 x 46,5mm.

Valve guide inlet + outer valve. Peugeot Diesel XD88 (1948cc) + XD4.90. Suitable for Peugeot 404

504, J7, J9. Citroen HY Diesel. Inside diameter: 8,5mm. Outside diameter: 14,05mm. Length: 54,50mm.

Valve guide, for the inlet + the exhaust valve. Suitable for Citroen 11CV + Citroen HY. Dimension

13 x 55 x 9mm. Or. No. 457358

Valve caps for the tire. With Citroen Logo. Set = 4 fittings!

Valve adjusting screw (valve clearance). Suitable for Citroen DS + Citroen HY. Thread: M7. Length

26mm. Or. No. 1D5412567A

• Suitable for this article
• 
  Valve clearance adjustment screw nut. Suitable for Citroen DS. Or. No. 9D 5412
  1,44 €

First aid kit Compact, according to DIN 13164. Length: 215mm. Wide one: 55mm. Amount: 130mm

Original LEINA!

Carburetor sealing set, for Solex PBICA. Suitable for Citroen 2CV, DS, 11CV, HY. Peugeot 403, 404

504 L, J7. Renault Dauphine + Floride. The diaphragm has a diameter of 20mm.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Carburetor ring spanner, for the 12mm nut. Suitable for Citroen 11CV, HY, DS

Carburetor sealing set small, Solex PBICA. Suitable for Peugeot 203, 403, 404. Citroen 11CV, HY, DS

(early years of construction).

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic

car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.

Seal under carburetor oval (2 fittings). Suitable for Citroen ID19, HY, 11CV. Peugeot. Inside

diameter: 34mm. Spacer bolt center to spacer bolt center: about 61mm. Or. No. 481717. This seal fits almost to all Solex 34 carburetors.

• Suitable for this article
• 
  Seal under carburetor, distance plate between intake manifold and carburetor
  5,62 €

Latching pin, which is inserted from above into the seat slide. Suitable for Citroen HY. It

prevents the seat frame from slipping out of the seat rail. Or. No. HY841-122

Locking cap down (27mm), in the rear, lower support arm. Suitable for Citroen HY. Or. No. 2480300U

ZD 9480 300 U.

End cap rubber. 10mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 12mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 14mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 16mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 18mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 21mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 23mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 26mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 8mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

Plug screw for the crankshaft. Suitable for Citroen ID19 + Citroen HY. Thread: M22 x 1.25 x 8. Or

No. DS121-88

Reinforcement cross-beam, under the body (in front + center). Suitable for Citroen HY. Total width

about 970mm.

• Suitable for this article
• 
  Floor pan repair sheet metal in the casing body, over-half cross-beam. Suitable
  83,29 €

Jacking support in the rear (per piece, on the left of or on the right suitable). Suitable for

Citroen HY. Or. No. HY623-89

Jacking support in front (per piece, on the left of or on the right suitable). Suitable for Citroen

HY. Or. No. HY623-85

Jacking point sheet metal at the rear left. Suitable for Citroen HY

Jacking point sheet metal rear on the right. Suitable for Citroen HY.

Jacking point sheet metal in front on the left. Suitable for Citroen HY. Or. No. H741-83

Jacking point sheet metal in front on the right. Suitable for Citroen HY. Or. No. H741-83A

Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the

existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.

• Suitable for this article