Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
for Citroën HY
1686 Articles | Page 33 of 34
PDF FILE 
Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual
indicator-relais. easy to fit.
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
Water pump (new part) for Citroen HY, Installed starting from year of construction 7/1963. Or
No.5443099V. A old part return is not necessary! Caution: The HY has an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!
Water pump (new part) HY 9/50 till 9/63, U23. Or.Nr. 456815. Caution: The HY has an open cooling
system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!
Seal, for the water pump, down at the engine block. Suitable for Citroen HY. Diameter: 40mm. Or
No. HY235-30. Made in Germany.
Water pump, suitable for Citroen HY Diesel. Peugeot 505 Diesel, Peugeot J7 Diesel. Possibly the two
small connections must be plugged. Or. No. 120187, 120295, 120291, 120288, 120299. Hose flange diameter: 1x 16mm, 1x 55mm, 1x 42mm.
Water pump seal small. Suitable for Citroen HY, starting from year of construction 09/1963. Or. No
HY23188A. Made in Germany.
Water pump seal small. Suitable for Citroen U23 + HY to year of construction 9/1963. Or. No
451631. Made in Germany.
Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating
g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating
g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating
pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!
Corrugated sheet - side plate on the left completely (consisting of 2 sheet metals 149cm). Suitable
for Citroen HY with normal (short) wheel base. The sheet metals have an offset edge, so that they can be added together.
Side plate with flanges. Flanges length: about 1640mm. Sheet metal length: about 1850mm. Suitable
for Citroen HY. The sheet metal has centrically a pressed recess for the mounting of a reinforcement cross-beam. A dispatch is possible only by shipping company. In the case of delivery outside of the European Union, the sheet metal must be cut through by us!
Side plate on the right with flanges. Suitable for Citroen HY. Flanges length: about 1640mm. Sheet
metal length: about 1850mm. The sheet metal has a pressed recess (joggle) at an end, for the mounting (welding) of a further shet plate (long sheet metal for extended HY `s). The combination of our No. 48303 + 48304 results the long sheet metal for the left side. A dispatch is possible only by shipping company. In the case of delivery outside of the European Union, the sheet metal must be cut by us!
Side plate on the right, with flanges. Flanges length: about 1640mm. Sheet metal length: about
1850mm. Suitable for Citroen HY standard length, for on the right of side. The sheet metal does not have pressed recess for the mounting of a reinforcement cross-beam. A dispatch is possible only by shipping company. In the case of delivery outside of the European Union, the sheet metal must be cut by us!
Corrugated sheet metal - side sheet metal, for the rear extension. This plate gives an extension of
approx. 79 cm. The corrugations run out to the rear. The corrugations are cut at the front, so that it can be visually attached directly to the existing corrugations. Suitable for Citroen HY. Per piece.
Corrugated sheet repair sheet metal, largely. Suitable for Citroen HY. 12 flanges. Measurements
600 x 1000mm. Accurate copy of the original flanges!
Windshield seal (2 pieces). Suitable for Citroen HY, up to year of construction 2/1964 ( splitted
windshield) Or. No. H96183.
Windshield seal (for one-piece windshield). Suitable for Citroen HY, starting from year of
construction 02/1964. Or. No. HY96183
Wiper axle chrome ring, Citroen 2CV, HY. Is mounted over the sealing rubber of the wiper axle
Reproduction. Per piece.
Wiper blade eleastic, per piece. Suitable for Citroen Dyane + ACDY, AMI6, Mehari, HY. Renault R4
4, Rodeo. Peugeot 403 + 404. 280mm lengthens. Original manufacturer Valeo! For 8mm of wide wiper arms.
Wiper blade from high-grade steel, suitable for wiper arms 16378 + 16379, for Citroen Dyane +
Acadyane, HY. Per piece. The wiper blade has a length of 265mm.
Wiper blade - windscreen wiper. Length: 32cm. Material: stainless steel (not polished). For 6,0
6,5mm wide wiper arms with straight connection. Universal suitable. E.g. Citroen DS, AMI, CX, GS. Renault 5,6,12,15,16,17,18. Alpine A110 + 310. Peugeot 204,304,504 and many many other classics.
Knob "D" for starter motor Bowden cable. Suitable for Citroen 11CV, 15CV, 2CV old, HY. The handle
is oval and from aluminum.
Round pull switch for the windscreen wipers, a reproduction of the original switches from the
1970s! 2CV models from the years of construction 1962 to 1974, Citroën DS, HY
Ignition cable fixture set. Consisting of the fixture (for 4 cables) above the ignition coil +
fixture (2 cables) suitable for cylinder No. 3 + 4, for Citroen DS, Citroen HY, Citroen GS. Or. No. GX0610801A + DX212-286A
Ignition cable holder. Suitable for Citroen DS + Citroen HY. This holder is screwed on the valve
cover. (at the fixing screws of the valve cover)
Ignition cable set, suitable for Citroen 11CV. Citroen HY, up to model year 1963. Or. No. 715024
Caution: These ignition cables are high-resistance and can only be used with low-resistance spark plugs (so no spark plugs with an R in the designation. R = cadio-control = high resistance).
Ignition cable set, suitable for Citroen DS (carburetor engine, starting from year of construction
1965) + Citroen HY, with in front mounted distributor. The ignition cable set is delivered with suitable spark plug sockets. Made in EU.
1686 Articles | Page 33 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
