for Citroën HY

Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).

piston ring compressor from 60 up to 125mm, workshop quality (HAZET)

Floor, pre-assembled, enabling to extend the box body about 63 cm, for Citroen HY. Citroen never

produced long version HY. All extended HY vehicles have been modified by body shops.This complete floor ist the basis for an HY extention of 63 cm.

Condenser Ducellier. Connection: Round plug. Suitable for Citroen HY, GSA, CX, Visa, Peugeot 204

104. Made in France.

Control light blue, version Jaeger. This very good reproduction of the Jeager light are installed

partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control lamp red for Citroen 2CV, HY, DS, with chrome border, reproduction of the original. The

suitable bulb has our number 14070.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light Citroen 2CV, HY, DS. Like original, color black with 4 differently colored caps

(green, blue, red, orange)

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light Citroen 2CV, HY, DS. Like original, color: chromium-plated, with 4 differently

y colored metal caps (green, blue, red, orange)

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light green, largely, conically. Reproduction of the original lights. Unfortunately the

quality is not so good. Suitable for Citroen 2CV, DS, HY.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light green, version "Jaeger". This very good reproduction of the Jeager light is installed

partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light green, turn light indicator to use with a tow trailer coupling. 12 V.

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €
• 
  Light bulb 12V, 2 Watt for pilot lamp (articles 50056-50059 ), socket BA7's
  1,19 €

Warning light with polished aluminium lid, blue

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Warning light with polished aluminium lid, yellow-orange

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Warning light with polished aluminium lid, green

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Warning light with polished aluminium lid, red

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €

Control light orange, version "Jaeger". This very good reproduction of the Jeager light is

installed partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light red, version "Jaeger". This very good reproduction of the Jeager light is installed

partly in 2CV AZAM + AMI6, 2CV (from Belgian production). Citroen HY. Installation hole: 10mm.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Control light red, largely, conically. Reproduction of the original lights. Unfortunately the

quality is not so good. Suitable for Citroen 2CV, DS, HY.

• Suitable for this article
• 
  Bulb 12 V. 2 Watt, base Ba 9s. (Instrument lights 2CV, ID19, HY, Peugeot 504)
  1,48 €

Red indicator light, large, cone-shaped (LED), 12 Volt. Reproduction of the original lights. So

visually "nostalgic" but with modern technology! Suitable for Citroen 2CV (old models), AZU, HY, DS. Diameter for installation: 17.0 mm

Red indicator light, large, cone-shaped (LED), 6 Volt. Reproduction of the original lights. So

visually "nostalgic" but with modern technology! Suitable for Citroen 2CV (old models), AZU, HY, DS. Diameter for installation: 17.0 mm

Fender Triangle sheet metal, in front on the left (transition fender to the driver's cabin)

Suitable for Citroen HY.

Fender Triangle sheet metal, in front on the right (transition fender to the driver's cabin)

Suitable for Citroen HY.

Fender in front (1 pair), out of sheet metal. Suitable for Citroen HY. The fenders are manufactured

in complex manual work!

• Suitable for this article
• 
  Fender sealing trim in black, universal fitting, by meters. Customer cut
  7,83 €
• 
  Fender sealing trim, 2 pieces. Suitable for Citroen HY, for the front fenders
  34,61 €

Fender in front on the left, from synthetic (GRP). Suitable for Citroen HY.

• Suitable for this article
• 
  Fender sealing trim in black, universal fitting, by meters. Customer cut
  7,83 €
• 
  Fender sealing trim, 2 pieces. Suitable for Citroen HY, for the front fenders
  34,61 €

Fender in front on the right, from synthetic (GRP). Suitable for Citroen HY.

• Suitable for this article
• 
  Fender sealing trim in black, universal fitting, by meters. Customer cut
  7,83 €
• 
  Fender sealing trim, 2 pieces. Suitable for Citroen HY, for the front fenders
  34,61 €

Fender sealing trim, 2 pieces. Suitable for Citroen HY, for the front fenders. Or. No. H851-96A

Fender in front, on the left (out of metal). Suitable for Cotroen HY.

Fender in front, on the right (out of metal). Suitable for Cotroen HY.

Fender at the rear left, new model. Suitable for Citroen HY. Very good reproduction made of GRP

with in-laminated stainless steel fixtures!

Fender at the rear right, new model. Suitable for Citroen HY. Very good reproduction made of GRP

with in-laminated stainless steel fixtures!

Fender rear on the left, made from sheet metal. (angular wheel arch). Suitable for Citroen HY

starting from year of construction 1968.

Fender rear on the right, made from sheet metal. (angular wheel arch). Suitable for Citroen HY

starting from year of construction 1968.

Fender at the rear left, old design. Suitable for Citroen HY, up to year of construction 11/1969

Very good reproduction made of GRP, with in-laminated stainless steel fixtures!

Fender at the rear right, old design. Suitable for Citroen HY, up to year of construction 11/1969

Very good reproduction made of GRP, with in-laminated stainless steel fixtures!

Fender at the rear left, made from sheet metal. (round wheel arch). Suitable for Citroen HY, up to

year of construction 1968.

Fender at the rear right, made from sheet metal. (round wheel arch). Suitable for Citroen HY, up to

year of construction 1968.

Fender sealing trim in black, universal fitting, by meters. Customer cut, return not possible!

Manifold seal inlet, centrically. Suitable for Citroen DS19, starting from year of construction

7/1959. Citroen HY. Inside diameter: 42mm. Connector long side: 100mm. Connector short side: 61mm. Bore for stud bolts: 8,5mm.

Manifold seal inlet. Suitable for Citroen DS, to year of construction 09/1968. Engine: DY, DL, DLF

Citroen HY. Or. No. DY14111. Inside diameter: 46mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 8,0mm.

Manifold seal inlet. Suitable for Citroen ID19 + Citroen HY. Or. No. DM141-11B. Inside diameter

39mm. Connector long side: 100mm. Connector short side: 62mm. Bore for stud bolts: 8,1mm.

Manifold seal inlet. Suitable for Citroen DS19 + Citroen HY. Or. No. DM141-11. Inside diameter

45mm. Connector long side: 103mm. Connector short side: 62mm. Bore for stud bolts: 9,0mm.

Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No

DS181-2

Castle nut, M14X1,5. Low version

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Ball pin (2x) with bearing shells (4x), for the steering gear. Suitable for Citroen HY, starting

from year of construction 04/1969. Ball pin length: 84mm. Thread: M12 x 1,5. Or. No. HY442-100. Bearing shells diameters: 28mm. Amount: 11,7mm. Or. No. HY442-242A. Since the year of construction 05/1972, the bearing shells are Installed.

Ball pin repair set above. Suitable for Citroen HY. Length: 84mm. Or. No. ZC9441176U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €

Ball pin repair set down. Suitable for Citroen 15CV + Citroen HY. Length: 105mm. Or. No. 441177 +

ZC9441177U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €
• 
  Locking plate, for a ball joint at the front axle. Suitable for Citroen HY. Or
  2,82 €

Ball bearing for the fly wheel. Suitable for Citroen HY. Inside diameter: 17,0mm. Outside diameter

40,0mm. Overall height: 12,0mm.

Ball bearing, for primary shaft. Suitable for Citroen DS. Dimension: 30 x 62 x 16mm. Or. No

ZC9620159

Balls (15 pieces) for the bearing seat of the torsion bar suspension. Suitable for Citroen HY

Diameter: 3,97mm. Per side are 15 balls mounted. Or. No. ZD 9411 200 U