for Citroën HY
1686 Articles | Page 7 of 34
Brake pipe set. Citroen HY, from year of construction 12/1967 to 1975. Single circuit brake system
Material: Stainless steel
Stop light switch at the brake pedal. Connection flat plug. Connector: M12x1. Suitable for Citroen
2CV6, DS, CX, BX, HY, GS
Stop light switch, suitable for Citroen 11CV/15CV, to year of construction 07/1952. Citroen HY, to
year of construction 1963. Or. No. 712376
Stop light switch. Suitable for Citroen HY, to year of construction 01/1973. Original one, no
reproduction (NOS). Or. No. HG576-02
Brake hose at the rear left. Suitable for Citroen HY, of year of construction 1963 to 1969. Or. No
HY45356C. Made in France
Brake hose rear on the right. Suitable for Citroen HY, of year of construction 1963 to 1969. Or
No. HY45356B. Made in France
Brake hose rear. Suitable for Citroen HY, starting from year of construction 1970. Overall length
340mm. Or. No. HY45333A. Made in France
Brake hose in front. Suitable for Citroen 15CV. Citroen HY, to year of construction 1964. Length
360mm. Or. No. 520605 Made in France
Brake hose in front. Suitable for Citroen HY, of year of construction 1963 to 1972. Overall length
330mm. Or. No. HY453-27A. Made in France
Brake drum waer gauge. Used to measure the wear limit on brake drums as well as to measure the
diameter of the drum and then set the shoe position prior to drum re-fitting. Max size drums 400mm diameter. Brake drum wear gauge. Size range 160mm-400mm. Selected steel. Measures drum wear. Metric and Imperial scale
Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for hydraulic brake systems
For lubricating cylinder liners and pistons. Extends the service life of brake cylinders. Protects against corrosion. Compatible with DOT 3, DOT 4 and DOT 5.1 brake fluids. Keeps sleeves soft. Supports the installation of O-rings, lip seals, sleeves and other sealing elements made of rubber-elastic materials. Apply brake cylinder paste thinly and evenly on the surfaces to be lubricated. Attention: If you are installing a new wheel brake cylinder in your classic car, please coat the pistons and sleeves with this paste before installation. This will increase the longevity of the new brake parts on cars that are driven occasionally.
Bush (mounting for the axle) in the water pump housing. Suitable for Citroen 11CV + HY. Dimension
15 x 19 x 32mm. Or. No. 3293S
Bush (bearing) from bronze, for the brake shoes. Suitable for Citroen 11CV + HY. Dimension: 20 x 22
x 10mm. Or. No. 438314 + ZY9438656U. Note: For HY the bushes must be shortened on an height of 8,5mm (grind off).
Choke cable with oval knob. Suitable for Citroen 11CV/15CV, starting from year of construction
07/1952. Length: 810mm. This choke cable can be installed also universal. Or. No. 723171
Autosol chrome polish. 75 ml tube. (Premium chrome shine care). Autosol chrome polish has been
around for ages and has often been copied! Made in Germany.
Citroen emblem (Chevron) on the dashboard. Suitable for Citroen 11CV + 15CV, up to year of
construction 02/1952. Or. No. 802594. Dimension: 38 x 40mm. The emblem can also be used universal.
Emblem Citroen (Chevron) plastic, chromium-plates. Height of brackets about 55mm. Suitable
retaining tie-clip = 37264. The tie-clip is required 4x!
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to
adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
PDF FILE 
Roof for the driver's cab. Suitable for Citroen HY. Reproduction from GRP (synthetic). Or. No
H825-94. Dispatch only possible by shipping company!
Roof antenna with spring mounting (spiral), suitable for Citroen DS. This antenna is also universal
applicable. Length about: 870mm. Reproduction
Roof seam cover inclusive flanges ends. Suitable for Citroen HY. This sheet metal is about 1000mm
long and covers the two roof halves. It is on the left and on the right a complete original flange in each case (with ends). You split this sheet metal and have then for front and rear the roof seam cover.
Roof half left complete, made of sheet metal! Suitable for Citroen HY with standard wheelbase
Shipping only possible by forwarding (relatively expensive). Dimension: 2750 x 950 x 1.0mm.
Roof half on the left, made of GRP. Suitable for Citroen HY. The roofs have an offset edge, so that
several roofs can be extended. Dimension: 1830mm x 970mm. Or. No. H825-1
Roof half right complete, made of sheet metal! Suitable for Citroen HY with standard wheelbase
Shipping only possible by forwarding (relatively expensive). Dimension: 2750 x 950 x 1.0mm.
Roof half on the right, made of GRP. Suitable for Citroen HY. The roofs have an offset edge, so
that several roofs can be extended. Dimension: 1830mm x 970mm. Or. Nr. H825-1A
Cap for a brake fluid reservoir from glass. Thread about 44mm. Suitable for Citroen 11CV, 2CV, HY
Panhard, Peugeot 203, 403, 404.
Kunststoff-Teufel® is a highly active and electrolytic cleaning agent. It effortlessly removes the
strongest grease and oil stains, nicotine, soot, burnt-in stains and much more from plastics and other alkali-resistant surfaces. An antistatic and dirt-repellent surface is left on the cleaned surfaces. Kunststoff-Teufel® is the perfect cleaner for household, hobby and business (e.g. ideal for cleaning kitchens, blinds, caravans, garden furniture, tarpaulins, car and truck interiors etc.). 1000ml spray bottle! We ourselves only work with the "Teufelsreiniger" (devil's cleaner). We have only had the best experiences. Made in Germany
Distilled water, 5 liters. For radiator filling. Tap water contains harmful components for the
cooling circuit. For mixing the antifreeze fluid, please take care to use distilled water . It improves the adhesion of corrosion-blocker in your cooling system.
Sealing sleeve, for a wheel brake cylinder piston (1.1/8 inch = 28,56mm). Suitable for Citroen HY
Also universal fitting for other vehicles!
Sealing sleeve, for a wheel brake cylinder piston (19,0mm). Suitable for Citroen HY. Also universal
fitting for other vehicles!
Sealing sleeve, for a wheel brake cylinder piston (7/8 inch = 22,19mm). Suitable for Citroen HY
Also universal fitting for other vehicles!
1686 Articles | Page 7 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
