for Citroën HY
1686 Articles | Page 34 of 34
Spark plug electrodes extension. Suitable for Peugeot 403, 404, 504, J7. Renault R16. The extension
fits also on Citroen DS + HY. With Citroen DS can be, that the rubber protection from the ignition cable, must cut off a little bit. It can be, that you must change the hole from the spark plug locking cap to 10mm. Normally no changes are necessary. Just opposite DS, the extensions from the Peugeot method is an significant improvement, because the electrode is fully insulating!
Spark plug isolation pipe. Material such as original (PF CP 21). Suitable for Citroen DS, HY, CX
Dimension: 13 x 15 x 105mm. Or. No. DX212-77. Made in Germany
Spark plug NGK BP6 HS. Suitable for all Citroen DS models, Citroen HY, Citroën Traction 11cv and
15six. Short thread. Thread: M14 x 1.25 x 10mm. Wrench 21mm.
Spark gap measurement (testing) tool. With the help of this small, inexpensive tool, the spark gap
of the spark plug can be checked very easily and safely. So, if the engine does not start: Is the spark plug sparking at all! And if so, how strong! Then exclusion procedure: Ignition OK? It is not getting any petrol!
Flexible Spark Plug Remover/Installer. This specially designed tool allows access to spark plugs
where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.
Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool
installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).
Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts
9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool
can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).
Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For
all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug wrench (adjustable in length), for 20,8mm spark plugs. This key is perfect for the
Citroen DS. It can be used with the normal electrode extension. Fitting for 3/8 inch ratchet (medium size). Fits of course also on all other spark plugs, for 21mm tools. Manufacturer: HAZET. Adjustable length from: 137,5mm to 157,5mm and 195,5mm. With spark plug holding rubber.
Spark plug wrench (tube wrench), for 20.8 mm spark plugs. 300mm long! Particularly for Citroen DS
Peugeot 203, 403, 404, 504. Workshop quality!
Ignition lock in the dashboard, for Citroen 2CV with starter button (with 2 connections). The
ignition lock also fits in the Citroen DS until 1967, AMI6 and Citroen HY. Reproduction, incl. 2 keys.
Ignition lock in the dashboard, for Citroen 2CV with starter button (with 4 connections). The
ignition lock also fits in the Citroen DS until 1967, AMI6 and Citroen HY. Reproduction, incl. 2 keys.
Starter lock in the dashboard. Suitable for Citroen 2CV + HY. Inclusive 2 keys. The lock has 2x
mounting thread M5 x 0.80 (ISO standard metrically). In the old Citroen is often M5 x 0.75 installed. Use please 2 suitable screws!
Ignition lock key blank, suitable for Citroen 2CV, DS, HY. (small version, ignition key has the
size of door keys, for vehicles with starter button). Shaft length: 17,3mm. Shaft width: 7,0mm.
Ignition lock, suitable for Citroen DS, up to year of construction 1968. Citroen HY. True to
o original reproduction. Or. No. DW21214C
Ignition coil 12 volt (Bosch), without pre-resistor. Suitable for Citroen DS, GS, HY. Peugeot 203
204, 304, 403, 404, 504, J7. Renault R4, R5, R16 etc.. We have it again, the original Bosch Asphalt ignition coil! The ignition coil owes its name to the fact that asphalt is used for the insulation inside the coil (just like before!)
Ignition coil with pre-resistor. 12 V. Brand manufacturer! Suitable for Citroen DS, CX, GS, AMI8
Super. Peugeot 403, 404, 504, 505. Renault R4, R5, R12, R16 etc.
Ignition coil 12 V, without pre-resistor. Suitable for Citroen DS, GS, HY. Peugeot 203, 204, 304
403, 404, 504, J7. Renault R4, R5, R16 etc.. Original VALEO
Ignition coil 6 V. Manufacturer: Bosch! Suitable for Renault (4CV, Floride, Dauphine, Estafette
R4.). Citroen 11CV, HY.
Spark Indicator. This non-contact spark tester will test for the presence of power in spark plugs
coils and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensy bulb will flash indicating spark. Note: Depending upon screen of the ignition cables, it can be possible, that you see the flashing by daylight, very bad!
Auxiliary headlight: Fog headlight small, type Marchal 640. Optically like original. Universal
fitting. This headlamp was an original related accessory for Citroen 11CV. Diameter: 140mm. The case is chromium-plated and made of metal. Without "E" test character! Suitable bulb 12 Volt= 14415, 14418, 14417. Bulb 6 V = 14178
Brake cylinder hone. For use with a cordless drill to clean brake cylinders during service
22-69mm. For honing out brake cylinders. For use with a standard drill.
Engine cylinder hone. Enables the inside surface of the cylinders to be cleaned of carbon deposits
etc. Suitable for all cylinders with a bore diameter of 50
Cylinder head gasket set for Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY Diesel +
Peugeot 404 D + 504 D. The cylinder head gasket is 1,7mm heavily.
Cylinder head gasket Indenor Diesel. Engine: XD85. Suitable for Peugeot 403 Diesel, 404 Diesel
first years of construction. Citroen HY Diesel. Original manufacturer.
Cylinder head gasket set for Indenor Diesel. For engine: TMD85, XDP85, TMD85-AD, XPD (1816cc)
Suitable for Citroen HY Diesel. Peugeot 403 Diesel, 404 Diesel, 504 Diesel, J7 Diesel. Heavy one: 1,25mm. Or. No. 0199.48
Cylinder head gasket set. Suitable for Citroen ID19, ID20, DS20, DS21, ID21. For engines: DV, DY
DX first version. 1985cc, bore 86mm + 90,0mm. Citroen HY 1,9L, starting from year of construction 11/1969.
Cylinder head screw (10 x 102mm). Suitable for Citroen 11CV, with Perfo engine. Citroen HY, of year
of construction 07/1952 to 11/1958.
1686 Articles | Page 34 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
