Covering black, from vinyl (on the left of or on the right fitting). Suitable for Citoen HY, of
year of construction 10/1968 to 09/1970 (2 series).
for Citroën HY
1694 Articles | Page 29 of 34
Covering black, from vinyl (on the left of or on the right fitting). Suitable for Citoen HY, from
year of construction 1949 to 10/1968 (1 series).
Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to remove paint and
surface rust without harming the support material. It don`t cause any damage of rubber , glas or plastic, so a complicated covering is not neccessary. In opposite to sandblast, Soda protects the cleaned material against rust at once. Enviroment friendly and gently removal from different coatings on boats, wooden furniture, glas and window frames is possible. This blast gun is not suitable for sandblast usage. Operating pressure is 87-174 lbs. Minimum air consumption is 180 liter/minute at 120 lbs.
PDF FILE Mirror bracket reinforcement at the top of the door. This bracket fits at the top of the door, and
is mounted above the bead. Suitable for Citroen HY.
Mirror for clamping to the door. Made entirely of metal. Typical door mirror, as often used in the
1940s and 1950s (Citroen 11CV, Peugeot, Renault). Diameter: approx. 95 mm. Suitable for left and right!
Mirrors to attach at the door. Completely made of metal. Typical door mirror, how it installed very
often in the forties and fifties. Diameter: about 100mm.
Spray adhesive, 500ml. Very useful for affixing of interior lining, damming mats, hoods etc. High
adhesive. We have been searching for a long time since we found a really good one.
Spraying varnish 400ml, LHM green. Approximate varnish (RAL 6005). Corresponds rather accurately to
the original varnish tone AC502.
VIDEO 
Spraying varnish 400ml, chocolate-brown for DS + SM. With DS for: Ventilation connecting piece in
the bumper, crossbeam in front, cover sheets in the wheel house, shields before hydraulics, fixture in the engine compartment etc.. Please use up it within 6 months!
Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the
alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.
Tie rod (per piece), without tie rod end. Length: 603mm. Suitable for Citroen HY, starting from
year of construction 09/1967. The tie rods are on the left + on the right identically constructed. Or. No. HY443-1
- Suitable for this article
Tie rod end repair set largely. Pin length: 74mm. Thread: M12 x 1,5. Suitable for Citroen HY
starting from year of construction 4/1969. Or. No. HY443-100 + ZC9601876U.
Tie rod end repair set small (pins with 2 bearing shells). Pin length: 74mm. Thread: M12 x 1,5
Suitable for Citroen HY, starting from year of construction 4/1969. Or. No. HY443-100 + ZC9601876U.
Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal
suitable for Citroen, Peugeot, Renault.
Dust cap wheel brake cylinder, for piston diameters: 3/4 inch (19,05mm). Suitable for Citroen HY
Also universal fitting for other vehicles! Made in France
Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY
11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France
Side plate on the left, between the step and the door. Suitable for Citroen HY. Reproduction in
manual work. Made one in European Union.
Side plate on the right, between the step and the door. Suitable for Citroen HY. Reproduction in
manual work. Made one in European Union.
1694 Articles | Page 29 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
