Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

for Peugeot 404

1472 Articles | Page 10 of 30
Shipping country Shipping country

Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1

kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!

Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg

softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!

Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles

radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators

360° VIEW

Plastic line (nylon) between clutch taking cylinder and clutch master cylinder (without ends)

Outside diameter: 6,3mm. Inside diameter: 4,3mm. By meters. Suitable for Peugeot 204, 304, 404, 504, 505, 604. Only use DOT3 + DOT4 (never use DOT5 or DOT5.1!).

Clutch line sealing ring (for the line between clutch taker + clutch transmitter). Suitable for

Peugeot 204, 304, 404, 504, 505, J7. Dimension: 6.5 x 10.2 x 7.5 mm. Or. No. 2091.03

Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204, 304, 404, 504, 505

J7. This sleeve is inserted to the end of the clutch line!

Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for Peugeot 204, 304

404, 504, 505, J7. Or. No. 2091.01. Note: There was plastic line with 6,3mm, 7,0mm + 7,3mm diameter. If necessary rebore the screw on that suitable diameter.

Light cap half (mushroom form), color clear. These mushroom-shaped lights were mounted at many

classical Peugeot. In completely clear (then 2x required) (parking light on fender, interior light, door entry light), or in combination with a red or orange half mushroom. (Article number 75300 + 75301). Clog please the desired combination with adhesive.

Light cap half (mushroom form), color orange. These mushroom-shaped lights were mounted at many

classical Peugeot. In completely orange (then 2x required) (parking light on fender, interior light, door entry light), or in combination with a red or clear half mushroom. (Article number 75299 + 75301). Clog please the desired combination with adhesive.

360° VIEW

Light cap half (mushroom form), color red. These mushroom-shaped lights were mounted at many

classical Peugeot. In completely red (then 2x required) (parking light on fender, interior light, door entry light), or in combination with a orange or clear half mushroom. (Article number 75299 + 75300). Clog please the desired combination with adhesive.

360° VIEW

Generators battery charging regulator three-phase current 12V, universal. Connections: IGN= clamp

15. FLD= DF at generator (connection at the brush). Ground on case! Optically very nice. Dimension case: 64mm x 40mm. Overall height: 56mm. Dimension screwed joint sub-base: 83mm x 83mm. Screwed joint distance (slotted holes) from 60 to 70mm.

360° VIEW
1472 Articles | Page 10 of 30
Shipping country Shipping country