Search in Peugeot-404 for 404

P 404, material Turquoise 2172 + vinyl Turquoise 3172. Seat in front on the left, cushion cover

r. Peugeot 404 salon up to 1969. Or. No. 898053

P 404, shock absorber (spring-and-damper unit) repair set in front. Suitable for Peugeot 404

Thread: M14. Diameter piston rod: 20mm. Diameters shock absorber pipe/spring-and-damper unit: 36mm. Consisting of: Guide, sealing washer, seal, nut.

P 404, shock absorbers in front, (2 fittings). Suitable for Peugeot 404, of year of construction

10/1960 to 09/1965 (spring and damper units). Thread above: 16mm.

P 404, shock absorber in front. Suitable for Peugeot 404, starting from year of construction 1965

16mm mounting. Per piece!

P 404, bumper lower part, rear on the right. Suitable for Peugeot 404. Original Peugeot, no

reproduction. Or. No. 7412.10

P 404, bumper in front + rear from high-grade steel. Suitable for Peugeot 404 Cabrio + Peugeot 404

Coupe. 1 series to year of construction 1966.

P 404, bumper in front + rear from high-grade steel. Suitable for Peugeot 404 Cabrio + Peugeot 404

Coupe. 2 series of year of construction 1966 to 1968.

P 404, bumper horn in front on the left. High-grade steel polished. Suitable for Peugeot 404. This

horn was mounted without rubber. Or.Nr.744850.

P 404, fuel sender, suitable for Peugeot 404. Or. No. 1526.38. Please adjust to the fuel tank

height! This fuel sender is for the first version of the Peugeot 404, with spare wheel in the boot (with screw holes).

• Suitable for this article
• 
  Fuel sender seal from rubber. Suitable for Citroen 2CV + Citroen DS, Renault
  2,96 €

P 404, carpet set from loop pile. Suitable for Peugeot 404 sedan. Color: dark grey

P 404, carpet set from Velour. Suitable for Peugeot 404 sedan. Color: black.

P 404, carpet set. Suitable for Peugeot 404 sedan. Color: dark blue

P 404, ball joint/ball and socket joint, repair set. Per side. Suitable for Peugeot 404. Thread

11x1. Or. No. 364012

P 404, door handle rubber underlays. Suitable for Peugeot 404.

P 404, door lining "low version" (4 item), black, vinyls. Suitable for Peugeot 404, starting from

salon 1968.

P 404, improved line between clutch master cylinders and clutch taking cylinders. Suitable only for

Peugeot 404 sedan starting from year of construction 1967. (BA7 gearbox). This line with 2 flexible hoses renews the plastic line. Overall length about 760mm. Or.Nr. 209006

• Suitable for this article
• 
  P 404, clutch master cylinder. Suitable for Peugeot 404. Piston diameter
  46,51 €
• 
  P 404/504, clutch taking cylinder. Piston diameter: 28,57mm. Suitable for
  44,53 €

P 404, hood black, from "Sonnenland" material. Suitable for Peugeot 404 design 1967 + 1968

Panorama window inclusive back window (clear). With zipper. Made in Germany. No cheap reproduction, properly matching, no sewing works necessarily.

P 404, carburetor 34 BICSA (reproduction). Suitable for Peugeot 404 (engine XC6). Not suitable for

automatic gearbox. Peugeot 403. Peugeot 504 (engine XM7).

• Suitable for this article
• 
  Seal under carburetor, distance plate between intake manifold and carburetor
  5,62 €
• 
  Seal under carburetor for Citroen 2CV, with round carburetor. Inside diameter
  2,18 €
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

P 404, front axle rubber repair set (for anti roll bar). Suitable for Peugeot 404.

P 404, front axle Rep set completely, for both sides. Suitable for Peugeot 404.

P 404, rear jack point. Suitable for Peugeot 404. Or. No. 7241.19

P 404, windshield seal (for mounting with sealing trim). Suitable for Peugeot 404 sedan + BREAK, of

year of construction 1959 to 1979. Reproduction of brand manufacturers from France. Or. No. 812025

P 404, cylinder head gasket. Suitable for Peugeot 404 (1,6L). Engine: XC7. Manufacturer: Original

Reinz!

P 404, cylinder head gasket. Suitable for Peugeot 404 Injection. Or. No. 0203.24. Diameter 86,8mm.

P 404. Door hinge (per piece) above, for the rear door (on the left + on the right. Suitable for

Peugeot 404. Original Peugeot, no reproduction (NOS). Or. No. 9038.11

P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine block). Dimensions

78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany

P 404/403/J7, engine suspension in front. Suitable for Peugeot 404, Peugeot 403, Peugeot J7. Fuel

engines. Hole spacing: 86 mm. Dimension rubber block: 70x50mm. Height: 30mm. Or. No. 1807.13

• Suitable for this article
• 
  P 203/403, M10 nut (hexagonal pipe nut) on engine mount (screw connection of
  3,87 €

P 404/504, front exhaust collector, mounted on the exhaust manifold (resonator). Suitable for

Peugeot, from 1967 year of construction. Peugeot 504, with 1.8L engine. Or. No. 1720.03

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  Flange gasket for the exhaust pot at the exhaust elbow. Suitable for Peugeot
  4,86 €

P 404/504, clutch release sleeve for Peugeot 404 gasoline + diesel, from year of manufacture 1967

Peugeot 504 (1.8 + 2.0 gasoline) + diesel. For clutch disc with 8 springs.

P 404/504, brake shoes to rivet. 280mm diameter, 62mm wide. Rear axle. Or. No. 424562

P 404/504, brake hose from the master brake cylinder to the Hydrovac. Suitable for Peugeot 404 +

504. Length: 270mm. Thread: Both sides 3/8 x 24 UNF. If 1/2" connections be present , use please adapter pieces 74561 + 74565. Or. No. 458001

• Suitable for this article
• 
  Reduction adapter from 1/2 UNF to 3/8 UNF. For Hydrovac!
  11,79 €
• 
  Brake hose adapter from 1/2x20 (male) UNF on 3/8x24 UNF (female). (for large
  10,90 €

P 404/504, brake hose in front + rear. Suitable for Peugeot 404, of year of construction 1969 to

1975. Peugeot 504, from 1968 to 08/1975. Peugeot 204, from 1968 to 1970. Length: 375mm. Connection: 1x male thread 3/8x24UNF. 1x male thread 5/8x18UNF with female thread 3/8x24UNF. Or. No. 4816.11 + 4816.12 . Made in Europe.

• Suitable for this article
• 
  Clinch screw. F-flange. Thread: 3/8 x 24UNF. Wrench: 11mm. Suitable for Renault
  1,24 €

P 404/504, spring plate in front. Diameter 165mm. Suitable for Peugeot 404 + 504. Per piece

P 404/504, bonded-rubber bushing for the anti roll bar ouple rod (rear axle). Suitable for Peugeot

404 + 504. Inside diameter: 10mm. Outside diameter: 27mm. Or. No. 5179.02

P 404/504, rubber metal bearing for the rear bearing from the strut, at the front axle. Suitable

for Peugeot 404, 504, 505, 604. Inside diameter: 16mm. Outside diameter: 25mm. Length inside: 17mm. Length outside: 12mm. Or. No. 3523.10

P 404/504, neck journal bearing flange (outlet cardan shaft at the gearbox). Suitable for Peugeot

404 + 504. Or. No. 2608.10

P 404/504, neck journal bearing flange mounting kit. Suitable for Peugeot 404 + 504.

P 404/504, neck journal bearing flange sealing ring (O-ring). Dimension: 71 x 59 x 6mm. Suitable

for Peugeot 404 + 504.

P 404/504, exhaust pipe bracket in front of the gearbox. Suitable for Peugeot 404 + 504. Or. No

1714.11

P 404/504, master brake cylinder dual circuit. Piston diameter: 25,4mm. Suitable for Peugeot 404

U10/UXD. Peugeot 504 BREAK 1,8L petrol + Diesel 1,9L + 2,1l, starting from year of construction 1973. Brake line connector: 2x 3/8 x 24UNF. Connection brake fluid reservoir: 5/8 x 18. Or. No. 4601.78. Made in Europe.

P 404/504, cardan shaft. 1826mm long. External toothing: 25 teeth. Internal teeth: 25

P 404/504, cardan shaft center bearing. Outside diameter: 55mm. Inside diameter: 47mm. 16mm wide

Suitable for Peugeot 404 + 504. Or. No. 2811.08

P 404/504, trunk lock completely. Only suitable for sedan. Note: Does not fit at Cabrio or Coupe!!!

P 404/504, trunk lock, suitable for Peugeot 404 BREAK (all years of construction) + 504 BREAK (to

year of construction 31.05.1973). Orignal manufacturer Neiman. No reproduction. Neiman No. 902131

P 404/504, piston rings, for 1 piston. Suitable for Peugeot 404, 504, J7. Engine: XC5, XC6, XC7

Compression: 7,6: 1. Bore: 84mm. Piston rings: 2,0 + 2.0 + 4,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404/504, radiator hose above. Suitable for Peugeot 404, of year of construction 1960 to 1975

Peugeot 504. Inside diameter: 55,0 + 40,0mm. Or. No. 1343.25

P 404/504, radiator hose down. Suitable for Peugeot 404 Diesel, of year of construction 07/1970 to

1975. Peugeot of 504 Diesels. Engines: XD88 + XD90. Inside diameter: 35mm + 39mm. Or. No. 1350.38

P 404/504, clutch release yoke for BA7 gearbox (Bowden cable). Suitable for Peugeot 404, starting

from year of construction 1967. Peugeot 504 + 505. Length: about 195mm. Or. No. 2117.41

P 404/504, clutch completely (Diesel). Suitable for Peugeot 404 D. Peugeot 504 D. Engines: XD88

(1,9L), XD90 (2,1L) to year of construction 07/1981, XD2 (2,3L) to year of construction 07/1981. Reproduction with centering mandrel. Diameter: 215mm. Teeth: 10. Or. No. 2004.90

P 404/504, clutch completely (reproduction). Suitable for Peugeot 404, starting from year of

construction 10/1967. Peugeot 504. 4 liners petrol (engine capacity: 1796cc + 1971cc). Diameter: 215mm. Teeth: 10. Or. No. 2001.90 + 2004.89