Vlave clearance adjusting screw. Thread: M7 x1. Length: 26mm. Suitable for Peugeot 203, 403, 404
504, 505, 604. Or. No. 0906.05
for Peugeot 404
1471 Articles | Page 29 of 30
Carburetor sealing set, for Solex PBICA. Suitable for Citroen 2CV, DS, 11CV, HY. Peugeot 403, 404
504 L, J7. Renault Dauphine + Floride. The diaphragm has a diameter of 20mm.
Carburetor sealing set small, Solex PBICA. Suitable for Peugeot 203, 403, 404. Citroen 11CV, HY, DS
(early years of construction).
Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic
car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.
Seal under carburetor, distance plate between intake manifold + carburetor (Solex carburetor)
Suitable for Citroen 11CV. Inside diameter: about 33mm. Outside diameter: about 77mm. Wide one: 50mm. Overall height: 5mm. Or. No. 481481
Plug screw M22x1,5. This screw is used as drain plug for the radiator, partly as threaded plugs at
the water pump or in the cylinder head. Also as filler plug for the gearbox. Suitable for Peugeot 203, 403, 204, 404, 504, 505. Or. No. 0243.06
Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
- Suitable for this article
Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual
indicator-relais. easy to fit.
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
P 404/504, carbon brush for the disengageable fan blade at the water pump. Suitable for Peugeot
203, 403, 204, 304, 404, 504. Or. No. 126713 + 140421
Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating
g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating
g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating
pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!
Wiper blade eleastic, per piece. Suitable for Citroen Dyane + ACDY, AMI6, Mehari, HY. Renault R4
4, Rodeo. Peugeot 403 + 404. 280mm lengthens. Original manufacturer Valeo! For 8mm of wide wiper arms.
Wiper blade - windscreen wiper. Length: 32cm. Material: stainless steel (not polished). For 6,0
6,5mm wide wiper arms with straight connection. Universal suitable. E.g. Citroen DS, AMI, CX, GS. Renault 5,6,12,15,16,17,18. Alpine A110 + 310. Peugeot 204,304,504 and many many other classics.
Ignition cable distributor cap to spark plug. Length: 400mm. Suitable for Renault R4, for liner 3 +
4. Peugeot 204 + 304, liner 1. Peugeot 404 + 504, liner 4. Made in Germany
Ignition cable set. Suitable for 404 (1,6L) all model`s. Peugeot 504 (1,8L + Injection). 504 Pick
UP (1,6). J7 (1,6L + 1,8L). Citroen C25 (2,0E). Cable length: 350, 550, 626 + 800mm. Cable to the ignition coil: 520mm. Made in Europe.
Spark plug electrodes extension. Suitable for Peugeot 403, 404, 504, J7. Renault R16. The extension
fits also on Citroen DS + HY. With Citroen DS can be, that the rubber protection from the ignition cable, must cut off a little bit. It can be, that you must change the hole from the spark plug locking cap to 10mm. Normally no changes are necessary. Just opposite DS, the extensions from the Peugeot method is an significant improvement, because the electrode is fully insulating!
Spark plug Eyquem/NGK C82LS/BP7ES. Suitable for Peugeot 404 injection. Peugeot 504 1,8i
(injection). Renault Alpine A310 1,6. Thread: M14 x 1.25 x 16mm. Wrench 21mm.
Spark plug isolation pipe. Suitable for Peugeot 203, 403, 404, 504. Original material (PF CP 21)
Dimension: 15 x 13 x 135mm. Made in Germany
Spark plug NGK BP5ES. Suitable for Peugeot 404 apart from 404 injection engines, 504 (2,0 TI), 504
V6. Thread: M14 x 1.25 x 16mm. Wrench 21mm.
Spark gap measurement (testing) tool. With the help of this small, inexpensive tool, the spark gap
of the spark plug can be checked very easily and safely. So, if the engine does not start: Is the spark plug sparking at all! And if so, how strong! Then exclusion procedure: Ignition OK? It is not getting any petrol!
Spark plug extension spring (set of 4). Made of copper (better conductivity). Length: 165mm
Suitable for Peugeot 203, 403, 404, 504. Or. No. 596301. This spring connects the spark plug to the spark plug connector!
Flexible Spark Plug Remover/Installer. This specially designed tool allows access to spark plugs
where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.
Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool
installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).
1471 Articles | Page 29 of 30
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
