Gasoline filter made of metal chromium-plates. The filter has a inspection window. Gasoline line
connection 5-6mm. Universal fitting.
connection 5-6mm. Universal fitting.
model. Better start after long immobilisation time. The membrane of the fuel pump does not run dry quickly. Indispensable for vintage cars. For fuel hose with 5,5 - 7,5 mm internal diameter. Diameter 34mm. Construction length totally 100mm.
polyamide'. Natural colour (as original). This polyamide line is resistant to modern fuels containing ethanol! Inner diameter: 4.0 mm. Outer diameter: 6.0 mm. The line fits into the original fuel line holders on the side of the chassis. The line is mounted on the side of the chassis and connects the tank and the fuel pump. Length: 2950 mm
12/1971. The link is in front, laterally mounted at the chassis, and joins the gasoline line from the tank to the fuel hose to the gasoline pump. Dimensions: 6x1x70mm. Or. No.: 5400918. Made in Germany.
pump with hand lever. Because most of 2 cv do not run much and because of high percentage of Ethanol in fuel, the gasoline pump desiccates. With this gasoline pump it is possible to pump fuel by hand, saving the battery after long immobilisation time. Made in EEC.
64mm. Tappet length: 64mm. Or.No.: A1738A
inserted normally only with sealing compound. Made in Germany
Chromated surface, the heads of the push rod are hardened! Suitable for the following engines: A79/1, M28, M28/1. Or. no. AY173-99. Made by Franzose/CiPeRe in Europe.
e following engines: A79/1, M28, M28/1. Or. no. AY173-99
1968, Renault, Peugeot. This seal replaces the paper gasket and is made of "KLINGERSIL". 0,5mm thick. Klingersil is an extremely resistant material, against oils, petrol, alcohol etc.
cut, return not-possible!
cut, return not-possible!
Customer cut, return not-possible!
Diameter: 5,5mm. Fasten please the hose with a hose clamp. Customer cut, return not possible!
identical, to the early time used hoses. Customer cut, a return is not possible!
all 2 and 4-stroke engines. Ideal for our classic cars. Prevents corrosion in the tank and in the entire fuel system. Antioxidants prevent the fuel from ageing (the petrol remains ignitable). Binds and neutralises condensation in the tank. Eliminates starting difficulties when the vehicle has not been used for a long time. And as a special feature, the petrol additive has an octane booster. It therefore increases the ignitability of the petrol (knock resistance). Particularly interesting for regions in this beautiful world where there is no super petrol with at least 98 octane, or if you are involved in motor sports! Packaged in a high-quality aluminium can. Contents: 150ml. Application: 150ml is sufficient for 20 litres of petrol. Fill the tank completely. Fill in the fuel additive. Run the engine for 10 minutes. Done!
corrosion in the entire fuel system. Ensures problem-free immobilization of vintage cars, convertibles, motorcycles, scooters, quads, lawnmowers, chainsaws, and other petrol-driven 2-stroke and 4-stroke engines. Increases operational safety. With long-term effect. 25 ml from the dosing device preserve 5 l fuel. Before decommissioning, add the appropriate quantity to the tank and allow the engine to run for approx. 10 minutes.
are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Diameter about 41,4mm, bore 10,3mm.
dents. 55mm diameter suction disc. Can be used in pairs if necessary provides strong pulling power.
Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).
sheet metal is locked under the chassis. Heavy: 1,5mm. Made in Europe.
resistance against corrosion, weathering, ageing, ozone, oils, petrol splashes and solvents. Contains no silicone (important for possible painting work). Super easy to use, no fiddling.
indicator. Simple assembly: Connection: Parallel from the connection of the flasher relay (for flash control light) to the control light connection.
Renault Alpine A 110 on the right.