for Peugeot ACDY
Gearshift knob (ball), made of plastic, with 2 printed horse heads (CV = horse / 2CV = 2 horse
heads) + gearshift diagram! Colour black. Suitable for Citroen 2CV, Dyane, Mehari
Gearshift knob (ball), made of plastic, with printed gearshift diagram! Colour black. Suitable for
Citroen 2CV, Dyane, Mehari
Gearbox shift sleeve (Selector wheel-disc) for the 2nd-3rd gear. Suitable for Citroen 2CV6, Dyan6
AK, ACDY, AMI, Mehari. Or. no. A335-96
Gear lever spring washer, for Citroen 2CV. This disk is mounted with the connection by the gear
lever interior onto the gear lever to the gearbox.
Gear lever: M7 screw, for the clip (gearstick on the gearbox). Inclusive nut and disks. Suitable
for Citroen 2CV6, 2CV4, Dyane, Mehari, AK.
Gear levers pin, for the gear lever connection with the shifter rod rubber. Suitable for Citroen
2CV. Measurement: 6x20mm. Or.Nr.: A334-57
Gear lever link (sheet metal), 90° twists, connection of the gear lever in the interior on gear
lever on the gearbox. (without rubbers). Suitable for Citroen 2CV.
Shift rod connector complete, with rubber bushings, spring washer, safety clips, bolts. Suitable
for Citroen 2CV. This connector is mounted between the gearstick lever from the passenger compartment and the gearstick lever on the gearbox.
Gear levers links with PTFE bushes. Suitable for Citroen 2CV. This link is mounted between the gear
lever from the vehicle interior and the gear lever on the gearbox.
Foam material set, for 1 seat, to upholster the seat! Suitable for Citroen 2CV, Dyane. (2x foam
material plate 15x580x580mm). Made in Germany
Foam material set, for 1 seat bench, to upholter the bench. The set fits on the front or rear seat
bench, for Citroen 2cv + Dyane. (2x foam material plate 1200x600x15mm). Made in Germany
Discs (windscreen) Pull-in tool (cord with handle). This is used to pull the rubber lip of the seal
over the sheet metal fold. Very helpful!
Windscreens (windscreen) piping assembly tool - bracket inserts. For small piping. There are 5
brackets in different widths so that narrow and wide piping can be fitted (e.g. for the 2CV, R4....). Suitable for tool with item number 20134.
Windscreen Installation Tool Set. Windshield sealing trim assembly tool. With this tools will the
rubber lip (seal) inclination (spread) and it can fit the sealing trim at the same time. Attention: The tool is for very wide piping. For chrome piping e.g. Citroen 2CV, Renault R4 etc. small brackets must be fitted. See our item number 20137.
Permanently elastic window sealant. Original Teroson! 75ml tube. Application : Ideal for sealing
rubber-mounted front, rear and side windows. Very stable, water resistant, remains elastic. Good adhesion even on damp windscreens.
Vehicle Window sealant permanent elastic. Original Teroson! Cartouche 310ml. Application: Ideally
to sealing rubber-mounted front. - Tail and side windows. Very stably, water-resistant, remains elastic. Good adhesion also on wet disk.
Washer reservoir electrical with built-in set for 2CV and other classical cars. Complete with
h push-button, cable, cross bars etc. very practical and small. Width 19,5cm, height of 16,5cm, depth 5,5cm
Washer reservoir with integrated, electrical water pump. 12 V. Capacity: 1.2 L. width: 122mm
overall height totally: 185mm. Building depth altogether: 100mm. The reservoir is supplied with fixture. The fixture is from the rear at the reservoir.
Washer reservoir, rubber bushing above in the cap (for the hose). Suitable for Citroen DS, HY, 2CV
etc. dimension: 5 x 18 x 4mm.
Wiper system nozzles - upper part (with one water ejection nozzle)! Suitable for 2CV, Dyane, HY, DS
S (DS Installed to year of construction 1969!). M 7x1mm
Wiper system nozzles - lower part, from brass. With additional connection for a hose. Suitable for
Citroen DS, to year of construction 1969. In addition, this additional connection is very practical for Citroen DS, HY etc.. Mounting hole: 7,0mm.
Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
Washer pump, electrically, color black. Suitable for Citroen DS. This pump is to be used also very
well for conversion, e.g. 2CV, Dyane, Peugeot, Renault. Note: The pump is not self-priming. The water must run (from alone) inside. Outlet water = power connection side. If the pump works more than 15 seconds without water, it is broken.
Windscreen washer foot pump seal. This is the seal that is fitted under the foot pump (seal to the
floor pan). Suitable for Citroen 2CV up to the year of construction 1970 (depending on country of delivery). Citroen Dyane, Acadyane. Renault R4 + R16.
Windscreen washer foot pump. Suitable for Citroen 2CV up to year of construction 1970 (depending on
country of delivery). Citroen Dyane + Acadiane. Attention: The pump has only 1 line connection.
Foot-operated pump set for windschield wiper fluid. Consisting of foot pump, 2 return flow
stoppers, 1x T-valve, 3 meters hose. Assembly: Starting from the foot pump with the T-valve, 1x to the reservoir (place the valve in such a way that the water from the reservoir can pass through) and 1x to the windshield washer nozzle (valve lets the water pass in the direction of the nozzle). The flow directions are marked with an arrow on the valve. Assembly instruction online in the shop.
Disk washing water hand pump, reproduction, 5mm. This pump is mounted in the dashboard. In
addition, the pump is a reproduction of the first version, and can installed into a Citroen 2CV6 and partial in a Renault R4 .
Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Wiper arm black, suitable for Mehari, Dyane > 06/1981. Reproduction. Length 31cm (from centre axle
mounting on vehicle to centre axle wiper blade mounting)
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Sliding window guide (1 pair) down, Citroen Dyane + Acadyane. Reproduction. Made in European Union
Optically like original!
Hose air circulation for the disc brake in front. Suitable for bad copied, French air circulations
(not suitable for our number 13020 + 13021). Citroen 2CV. 35mm inside diameter, 250mm long.
Hose air circulation, for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari
Reproduction. Inside diameter: 38mm. Length: 250mm.
Hose air circulation for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari
Accurate reproduction from synthetic, as the original hoses. Inside diameter 40-42mm, length 235mm.
