Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,7mm). Lenght
18mm, like original. Significant reproduction from the European Union.
for Peugeot ACDY
1676 Articles | Page 24 of 34
Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significant
reproduction from the European Union.
Suction screen engine oil, mounts in the oil pan. Reproduction. Suitable for 2CV6 starting from
year of construction 10/1970. Or.Nr.: AM2226A
Oil pump for 2CV6 (from year of construction 11/1970), inclusive Aluminum casing + cover plate
Made in Europe. The pump impeller is 10.5 mm heavily. For all 602cc engines. 2CV, Dyane, Mehari, AMI8.
Oil pump for 2CV6, reproduction, inclusive Aluminum casing. Pump impeller is 10.5 mm heavily. For
all 602cc engines. 2CV, Dyane
Sender for an auxiliary oil temperature instrument (VDO). The sender is mounted in place of the oil
drain screw. Suitable for Citroen 2CV.
VIDEO 
Connecting rod bush for Citroen 2CV (not suitable for 2CV6). Inside diameter: 19,5mm, outside
diameter: 22,1mm, height length: 25mm
Connecting rod bush for Citroen 2CV6. Inside diameter: 20,0mm, outside diameter: 22mm, height
length: 25mm. Original No. 75420101
Positive cable (battery to starter motor). Overall length: 500mm. Cable diameter: 16mm². Made in
the European Union. Universal fitting.
Upholstery Cleaner, Deep cleaning foaming action, 500ml. Eliminates tough stains and soils like
oil, grease and tar spots.
Hog Ring Pliers for use with A7 Hog Rings (Part No 21049). Complete with automatic feed. Ideal for
continuous connections. Single handed operation. Ideal for upholstery on classic cars.
Hog ring plier for the mounting of coverings (workshop quality). With this pliers the hog ring`s
18420 are optimally treated.
Primary shaft (new), suitable for Citroen 2CV6 (disc brake). Not suitable for Citroen Dyane +
Mehari. Or. No. AM332 1E
Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure
the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.
Wheel brake cylinder rear, brake system LHM. Suitable for Citroen ACDY starting from year of
construction 1978 (Dyane Van) + Citroen AMI 8 Super. Piston diameter: 19mm. Brake line connector: M8x1,25. Made in Europe.
PDF FILE 
Wheel brake cylinder rear, repair set, brake system LHM. Suitable for Citroen 2CV, Acadyane, AMI8
Mehari. Piston diameter: 17,5mm. The repair set contains all sealing rubbers.
Wheel cover from polished high-grade steel. Suitable for Citroen 2CV. The wheel cover looks like
the original Citroen wheel cover. Or.Nr. AY8541
Wheel cover polished, from high-grade steel. The wheel cover have a different design than the
original wheel covers. Suitable for Citroen 2CV. "The blue protective coating is very easy to peel off with hot water!
Wheel cover set completely for 4 rims. Suitable for Citroen 2CV. Consisting of: 4 wheel cover
(original shape). 4 wheel cover screw from high-grade steel. 4x box nut. Only sutiable with short wheel nuts.
Wheel cover set completely, consisting of 4x wheel covers, 4x wheel cover screw, 4 x box nut)
Suitable for Citroen 2CV. Note: The wheel covers can only fit, if you have short wheel nuts!
Wheel cover screw from high-grade steel, for Citroen 2CV. Original Citroen. Better treats with than
our No. 16812. Thread M 10 x 13mm, for wrench 19mm.
Wheel cover screw washer from synthetic, M10, for Citroen 2CV. These disks were in former times
original under the screw and prevent scratches and contact corrosion! Per piece.
Wheel bearing suitable for Citroen AK, ACDY, AMI 6+8, AZAM 6. Not suitable for the normal Citroen
2CV. Manufacturer "Der Franzose". Measurement: 36 x 76 x 29mm. The wheel bearing fits for the front axle + rear axle.
Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically
constructed at the front axle and at the rear axle. Youi need 2 shaft seals per wheel bearings at the front axle and 1 shaft seal per bearing at the rear axle. Dimension: 45 x 62 x 8mm. Made in Germany.
Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403, 404, 204, 304, 504
505. Thread: M12x1,25. Lubricate before mounting. Original supplier! Been suitable to torque: 130Nm
Wheel nut short, galvanized, suitable for Citroen 2CV, Dyane, Mehari, AMI. Measurement: M12 x 1,25
Is suitable up to 45 NM torque (2CV). Please lubrify before mounting. Replica
Wheel nut long, galvanizes, suitable for Citroen 2CV. Measurement: M12 x 1,25. Tightening torque
40-50 nm. Caution: hub caps cannot be used with short wheel nut`s!
Rear wheel hub: Threating die for recutting the thread of the rear wheel hub - brake drum (where
the 44 nut is mounted). Suitable for all Citroen 2CV, Dyane, AK, AZU, ACDY, AMI 6+8, Mehari. Very good workshop quality!
Rear wheel hub: die holder (winch) for recutting the thread of the rear wheel hub - brake drum
Very good workshop quality!
1676 Articles | Page 24 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
