Brake liner centering tool in front, for the drum brake. Suitable for Citroen 2CV, to year of
construction 1981. AMI, Dyane, Mehari.
for Peugeot ACDY
1677 Articles | Page 8 of 34
Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bore
10mm. Tool mounting: 24mm. These cams can be used also for Citroen DS, the bore must be changed to 12mm!
Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid reservoir seal for the locking cap (2 circle). Suitable for Citroen 2CV, with LHM
double circle brake system.
Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV6 with
front drum brakes. The reservoir is white dyed and has a white lid. The connection on the master brake cylinder is from center to center: 70mm.
Brake fluid reservoir with locking cap, for the brake system LHM. Suitable for Citroen 2CV6 with
front disk brake system. The reservoir is green dyed and has a white cap. The connection on the master brake cylinder is from center to center: 70mm. Or.Nr.: 95554585
Brake fluid reservoir locking cap (with electrical connection), for the brake system LHM. Suitable
for Citroen 2CV6, starting from year of construction 1981. (Tandem reservoir)
Handbrake brake pads, brand manufacturer. Suitable for Citroën 2CV with disc brakes, also for
Citroën GS 1.0. Due to manufacturing variations on the part of Citroën (in Portugal), it may be necessary to grind the brake pads down slightly.
Parking brake pads, reproduction, suitable for Citroen 2CV + Citroen GS 1,0. At the 2CV installed
of year of construction 1981 to 1990.
Front brake pads, suitable for Citroën 2CV6, Dyane6, AMI8, Mehari. Reproduction! Fitted to 2CVs
from the year 1981 > 1990.
Brake pads in front, suitable for Citroen Dyane + ACDY. These brake pads have a connection for wear
control. Reproduction. Made in Europe.
Brake line + fuel line fixture. Mounted laterally at the chassis. Suitable for Citroen 2CV4 + 2CV6
(Vehicles with light brake lines. 3,75mm). Reproduction, optically and technically like original.
Brake line and petrol pipe clamp made of metal, to be screwed on. Suitable for Citroen 2CV6, 2CV4
Dyane4+6, AK, ACDY, Mehari, AMI. This metal clamp is simply mounted with a screw. It can be used to attach the brake line and the petrol line at the same time. Older 2CVs up to the 1970s also had the clamp mounted on the chassis from above (1x behind the headlight carrier for the petrol line) and 1x below the main brake cylinder on the chassis (for the brake line).
Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates with cutting rings
A brake pipe flaring machine is not necessary. Or. No. 1D5426236B
Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!
Brake line + hydraulic line connector, for lines with 3,75mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,75mm diameter. For 3,50mm you require the connector 32388!
Brake line + hydraulic line connector, for lines with 4,75mm diameter. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!
Brake line from high-grade steel. Connection from the right brake caliper to the left brake
caliper. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
PDF FILE Brake line from high-grade steel. Connection of that 3 path link to the left rear wheel brake
cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
Brake line from high-grade steel. Connection of that 3 path link to the right rear wheel brake
cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI
Brake lines + hydraulic line connectors, for lines with 3.5 - 3.75 mm diameter. Thread on both
sides: M8x1.25. Optimal if 2 lines are to be connected to each other.
Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm line
(connector 8mm). Suitable for Citroen 2CV6 (for the brake hoses), Installed starting from year of construction 1981 (2CV with disc brake). Citroen DS, GS, CX, etc. for hydraulic lines.
Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic
fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV (for the brake hoses), Installed to year of construction 1981 (2CV with drum brake in front). Citroen DS to year of construction 1967, for the hydraulic lines.
Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear
brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.
Stop light switch at the brake pedal. Connection flat plug. Connector: M12x1. Suitable for Citroen
2CV6, DS, CX, BX, HY, GS
Brake caliper mounting bolt washer (for bolt 13099). Suitable for Citroen 2CV6, Dyane, AMI8
Mehari. Please note: This washer is specially designed for the brake calliper. It is 3mm thick and black galvanised. If a normal washer (thinner) is used, the fixing screw is often too long! (Brake calliper cannot be fastened properly or gearbox housing tears)
Brake caliper sealing set. Suitable for Citroen 2CV, LHM system. Consisting of: 2 x seal + 2x dust
bag for the pistons, seal between the brake caliper halves, connecting tube brake caliper halves. Now improved version from Denmark!
Brake caliper seal (for sealing the two brake caliper halves) for our brake caliper 13013
Dimensions: 10 x 6.2 x 1.9 mm, suitable for Citroën 2CV, Dyane, AMI. Please note: Only suitable for our reproduction brake calipers 13013.
Brake caliper seal (for sealing the two brake caliper halves). Dimensions: 11 x 7.0 x 2.0mm
suitable for Citroën 2CV, Dyane, AMI. Please note: Only suitable for original brake calipers. Not suitable for reproduction brake calipers.
Front brake calliper, complete. New part! Suitable for Citroen 2CV, from year of construction 1981
to year of construction 1990 (8mm brake line screw connection). No old part return required! Attention: A 3mm washer must be used for the mounting screws (our number 1300) or continue to use the original washers. Without these 3mm washers, the fastening screws are too long!
Brake caliper halves connecting tube. Suitable for Citroen 2CV, starting from year of construction
1981. Caution, it gives also brake calipers, which were sealed between the halves only with an O-ring!
Brake disks "sport" front (2 pieces). Suitable for Citroen 2CV, from year of construction 1981 up
to 1990. The brake disks are perforated and have more brake power. The disks are particularly for operating tow trailer, 2CV van (if heavily loaded) etc. In normal driving mode, a conversion is not necessary.
Brake disks in front (2 fittings). Suitable for Citroen 2CV. Installed from year of construction
1981 to 1990. Reproduction.
Brake disks in front (2 pieces). Suitable for Citroen 2CV. Installed from year of construction 1981
to 1990. Original manufacturer quality. Of it their safety is dependant. Be careful: If the brake discs are installed at the front of your car: Just use hydraulic fluid LHM as brake fluid and never DOT4! DOT4 can destroy within 24hours the hole brake system. That is expensive und very dangerous. Every LHM brake part is green marked.
Rear brake drum, new part. 180mm diameter, for the large wheel bearing. Suitable for Citroen AZU
AK, ACDY, AMI. The brake drum is supplied without wheel bearing.
Chassis ACDY, reproduction, looks like original. Suitable for Citroen ACDY - Acadiane (Dyane van)
The chassis does not have TÜV (homologation) papers. Made in Europe. The chassis is visually and technically the same as the original chassis! The chassis are powder-coated!
Choke cable old version, without light. Suitable for Citroen 2CV, Dyane, AMI6+8 until 1976, length
to 1500mm (can be shortened)
1677 Articles | Page 8 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
