Clip for the securement of the coverings at the seat frame. (slide-on clamp with hooks). Suitable
for citroen 2CV, Dyame, Ami, DS, HY.
for Peugeot DS
3321 Articles | Page 32 of 67
Clip for the sill trim (aluminium), suitable for Citroen 2CV. The clip also fits the bumper
mouldings for the 2CV up to 1961, the wide side mouldings for the Citroen DS and the cardboard radiator cowling for the Renault Dauphine. This clip is not as extremely strong as our number 16844, but is particularly suitable for aluminium trims (easier to fit, as aluminium trims are extremely sensitive to pressure).
Clip for the sill trim (stainless steel), suitable for Citroen 2CV. The clip also fits for the trim
strips on the bumper for 2CV up to 1961. For the Citroen DS for the wide side trim strips and for the cardboard radiator cowling for the Renault Dauphine. This clip is extremely sturdy. It is particularly suitable for trim strips made of stainless steel. For aluminium trims, we recommend the softer clip 16831.
clear coat 400ml spray can. In case of metallic paint always paint an additional layer of clear
coat on top, this is the only way that the paint is hardening
Sticky tape on both sides, for trim. Wide one: 16mm. Length: 20 meters. Manufacturer: 3M (acrylic
plus). Very high immediate adhesion and high sticking energy. Weather-proof!
Knob round, colour grey, screwable, for heating adjustment and air distribution, bench lock
Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, colour black, screwable, for heating adjustment and air distribution. Reproduction made
of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, chrome plated, screwable, for heating adjustment and air distribution. Reproduction
made of metal! Suitable for Citroen 2CV, DS, HY.
Black sealant putty, e.g. for sealing the windscreen of the Citroen DS. Dimensions: width 10mm
height 5mm, length 2500mm. This putty is also ideal for sealing openings in the engine front wall (cable ducts, choke cables, etc.).
Boot (rear chassis) complete (with axle mount). Suitable for Citroen DS saloon. A rear section made
entirely from new parts for the Citroen DS. Very expensive to make, but unfortunately often the only way to achieve a truly complete restoration! Visually identical to the original!
Luggage compartment, cover sheet for the axle (the sheet metal is screwed only in the luggage
compartment). Suitable for Citroen DS. Or. No. DM453-139
Luggage compartment. Rubber (sheet metal rail) for the luggage compartment seal. This fixture is
mounted on the rear end panel. Suitable for Citroen DS sedan.
Trunk floor reinforcement. Suitable for Citroen DS BREAK + DS Cabriolet. This sheet metal is welded
serial under the trunk floor and prevents oscillations.
Trunk floor. Suitable for Citroen DS sedan, starting from year of construction 1968. Like original
Best quality at the market. The boot floor has 2 holes for a rubber (drain holes). Or. No. D742-97
Baggage compartment floor sheet metal. Suitable for Citroen DS, starting from year of construction
1968. Reinforced version from 1,5mm sheet metal. Very good reproduction! The boot floor has 2 holes for a rubber (drain holes). Or. No. D742-97
Solo boot floor mat. Suitable for Citroen DS. Dimension: 720x810mm. Ready cut to size. Colour black
(material like original)
Push-button (application for the lockcylinder), for the door handles (of year of construction
04/1963 to 1971) + luggage compartment lid (04/1963 to 1971). Suitable for Citroen DS, AMI6, AMI8. Or. No. AM861-20 + DS861-18b + DS861-21 + D861-102 + D861-33
Boot handle: Boot lid handle (without lock insert, without lower seal). Suitable for Citroen DS
Pallas. Or. No. DX861-59B. Attention: The thread is unfortunately flattened at 12 + 6 o'clock instead of the original 9 + 3 o'clock. However, a quick work over with the angle grinder and it fits again. Unfortunately, there is no alternative on the market. This one or none.
Rubber seal under the luggage compartment handle. Suitable for Citroen DS. Dimension: 30 x 36 x
2mm. Or. No. 5416871H. Made in Germany.
Luggage compartmend lid BREAK. Support rail for the rubber down in the luggage compartmend lid
Suitable for Citroen DS BREAK. Length: 110cm.
Luggage compartment hood seal above (between back window and hood). Suitable for Citroen DS sedan
Length: about 160cm. Or. No. D853-66
Luggage compartmend lid, out of sheet metal (very good reproduction). Suitable for Citroen DS
sedan. Or. No. DM844-19
Luggage compartment hood. Sheet metal bracket on the left, for the mounting of the spring cartridge
from the luggage compartment hood (mounts on the interior fender). Suitable for Citroen DS sedan.
Luggage compartment hood. Sheet metal bracket on the right, for the mounting of the spring
cartridge from the luggage compartment hood (mounts on the interior fender). Suitable for Citroen DS sedan.
Luggage compartmend lid. Tnternal reinforcement plate, rear crosswise under the luggage compartmend
lid. Suitable for Citroen DS sedan. Very good reproduction.
Luggage compartmend lid hinge (1 pair). Suitable for Citroen DS Cabrio. The hinges are completely
for on the left + on the right. Or. No. DS844-013 + DS844-013A.
Luggage compartmend lid seal. Suitable for Citroen DS Pallas. The seal is out-foamed and in the
luggage compartment lid clogged. Notice: Kindly note that we fold up the seal for an easy shipment. Thus, it might happen that the seal is slightly bended upon delivery. We thus, kindly advise to store the seal unfold for some weeks until bending marks disappeared and can then be mounted.
Luggage compartment side wall repair sheet metal, at the bottom left (inclusive curvatures and
flanges). Suitable for Citroen DS. (stage 1 at the chassis).
Luggage compartment side wall repair sheet metal, at the bottom right (inclusive curvatures and
flanges). Suitable for Citroen DS. (stage 1 at the chassis).
3321 Articles | Page 32 of 67
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
