for Peugeot DS
3331 Articles | Page 8 of 67
PDF FILE Floor pan edge on the left (with flanges). This repair sheet metal is about 20cm wide and over the
whole length of the floor plate in the interior. It is the connection to the left box sill at the floor pan. Suitable for Citroen DS.
Floor pan edge on the right (with flanges). This repair sheet metal is about 20cm wide and over the
whole length of the floor plate in the interior. It is the connection to the right box sill at the floor pan. Suitable for Citroen DS.
Bosch, capacitor system Bosch. Suitable for Citroen DS 21 + DS 23. Peugeot 404 + Peugeot 504
Depending on availability, the capacitor is supplied by another brand manufacturer. Made in France.
Bosch, ignition contact system Bosch. The contact is stuck counterclockwise. Suitable for Citroen
DS21 IE, starting from year of construction 10/1971. Peugeot 204, 304, 404, 504. Renault R4 0,8l. Renault R5 1,3L. Renault R8 + R10. Reanult R12 + Talbot Baghhera. Depending on availability, the ignition contact is supplied from another brand manufacturer. Made in France.
Bosch, ignition contact system Bosch. The contact is struck clockwise. Suitable for Citroen DS21
IE, up to year of construction 12/1971. Peugeot 304 + Peugeot 104. Depending on availability, the ignition contact is supplied from another brand manufacturer. Made in France.
Bosch, distribution arm system Bosch. Suitable for Citroen DS21 + DS23 IE. Length over everything
49mm. Height over everything: 30mm. Inside diameter: 14mm. Setting up depth: 18mm. Depending on availability, the distribution arm is supplied of another brand manufacturer.
Bosch, distributor cap system Bosch. Suitable for Citroen DS21 + DS23 IE. Depending on
availability, the distribution cap is supplied from another brand manufacturer.
Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the
brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!
Brake + hydraulic line (4,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper
nickel) line. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 4,5mm. This repair set should always lie in the luggage compartment.
Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy, to
bend simply. Kunifer does not rust). Clinch screws please specially order!
Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel
alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line bundles: Complete fixture set for the group of lines in the left box sill
Suitable for Citroen DS.
Brake grinding pads, suitable for Citroen DS, starting from year of construction 1965. Citroen SM
all years of construction. The brake grinding blocks straighten the brake disks. The sanding blocks were former times standard equipment of each Citroen workshop! Or. No. 1D5451478S
Spring laterally, for the brake shoes (spring for locking pin brake shoes). Suitable for Citroen
2CV + Citroen DS. Or. Nr. A 5185
Spring plate laterally, for the pressure spring at the brake shoes. Suitable for Citroen 2CV +
Citroen DS. Or.Nr. ZC9438157U
Brake shoe spring plate assembly tool. This tool is for the safe assembly of the small spring
plates that are mounted on the side of the brake shoes (e.g. our item number 13054).
Brake shoes rear (4 fittings, for both sides). Suitable for Citroen DS sedan! Installed from year
of construction 1955 to 1975. Diameter: 255mm. Lining-width: 36mm. Or. No. DS451-016A
Brake shoes rear (4 fittings, for both sides). Suitable for Citroen DS Break! Installed from year
of construction 1955 to 1975. Lining-width: 46mm. Or. No. DF451-016A
Locking pin brake shoe (pin by the anchor plate), suitable for rear (all 2CV) + in front (2CV with
drum brake in front). Also suitable for Citroen DS (drum brake rear). 39mm overall length. Or. No. A451-83
Brake actuator (in pedal bracket) for "champion" brake button (only the slider). Suitable for
Citroen DS, hydraulic system LHM. The slider is mounted in the pedal block. Or. No. DXN453-021 (1D 5410496P). In exchange. Plus 150 Euro old part deposit.
Brake operation (hydraulic brake control) for mushroom brake button. Suitable for Citroen DS
Hydraulic system LHM. The complete block is supplied. It was reconditioned with new, calibrated pistons. The pedal adjustment for the rear wheel brake, was adjusted after factory regulations. Inclusive 12 ring seals for the bank of tubes. Plus 250 Euro Old part deposit.
Brake system accumulator, 2 connection. In the exchange. Hydraulic system LHM. Suitable for Citroen
DS carburetor. You require the following hydraulic line seals for mounting: 1x 32277 + 2x 33160. Or. No. 3D5409777. Plus 400 Euro Old part deposit.
Brake system accumulator, 2 connection. In the exchange. Hydraulic system LHS. Suitable for Citroen
DS, to year of construction 1965. Or. No. DF392-04. Plus 400 Euro Old part deposit.
Brake system accumulator, 3 connection. In the exchange. Hydraulic system LHM. Suitable for Citroen
DS IE + Citroen SM. You require the following hydraulic line seals for mounting: 1x 32277 + 2x 33160. Or. No. 3D5415541B. Plus 400 Euro Old part deposit.
Brake system accumulator, 3 connections. In exchange. Hydraulic system LHS. Suitable for Citroen
DS, up to year of construction 1965. Or. No. D392-02. Plus 400 Euro Old part deposit.
Brake bleed screw seal (O-ring). Hydraulic system LHM. Suitable for Citroen DS + Citroen SM
Dimension: 3.4 x 7.2 x 1,9mm. Or. No. 24828009N. Made in Germany.
Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is
supplied (without axle). Made in Germany.
Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV
and DS. Overall length 24mm. This axle has a small screw, in order to simplify mounting.
Brake centring: brake shoe centring cam axle spacer ring (installed between centring cam and anchor
plate, 10mm thick). Suitable for all Citroen 2CV rear + Citroen DS rear.
Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam
axle and anchor plate). Dimension: 9.5 x 27mm.
Centering cam for the brake shoe rear. Suitable for Citroen 2CV. Diameter of the cam: 20mm. Bore
10mm. Tool mounting: 24mm. These cams can be used also for Citroen DS, the bore must be changed to 12mm!
3331 Articles | Page 8 of 67
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
