for Peugeot J5

Wheel bearing oil-seal-ring 45x62x12. Peugeot 403, 404, 504, J7. Made in Germany.

P 403/404/J7, rear brake hose. Suitable for Peugeot 404 up to the year of construction 1966

Peugeot 403 second model. J7 first model. 5/8 UNF male thread. 7/16 UNF female thread. Length 485mm.

P 403/404/J7, piston + liner (4 pieces). Suitable for Peugeot 403 (8CV), of year of construction

1955 to 1961. Peugeot 404 U6 Commerciale (8CV). Peugeot J7 B 1400kg. Engine capacity: 1468cc. Bore: 80,0mm. Piston pin: 22 x 67mm. Piston rings: 2,0 + 2.0 + 4.5 + 4,5mm (4 coils). Overall length of the liners: 140mm

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 403D/404/J7/HY, piston (1 piece), suitable for Citroen HY Diesel. Peugeot 403 D, 404 D, Peugeot

J7 Diesel. For engine: XDP 85. Engine capacity: 1816cc. Bore: 85mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel
  82,21 €
• 
  P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel
  78,24 €

P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 93mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel
  82,21 €

P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 96mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  P 403D/404/J7/HY, piston (1 piece), suitable for Citroen HY Diesel. Peugeot 403
  208,16 €

P 404, clutch release yoke, for hydraulic clutch. Suitable for Peugeot 404 Diesel, starting from

year of construction 1967. Peugeot 305, 309, 405. Citroen C15, Citroen BX 19, starting from 1987. Or. No. 2117.42

• Suitable for this article
• 
  Bush for the clutch fork. Suitable for some Peugeot 205. Citroen C15, BX. Or
  2,13 €

P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine block). Dimensions

78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany

P 404/403/J7, engine suspension in front. Suitable for Peugeot 404, Peugeot 403, Peugeot J7. Fuel

engines. Hole spacing: 86 mm. Dimension rubber block: 70x50mm. Height: 30mm. Or. No. 1807.13

• Suitable for this article
• 
  P 203/403, M10 nut (hexagonal pipe nut) on engine mount (screw connection of
  3,87 €

P 404/504, piston rings, for 1 piston. Suitable for Peugeot 404, 504, J7. Engine: XC5, XC6, XC7

Compression: 7,6: 1. Bore: 84mm. Piston rings: 2,0 + 2.0 + 4,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404/504, clutch taking cylinder. Piston diameter: 28,57mm. Suitable for Peugeot 404, starting

from year of construction 01/1969. Peugeot 504, starting from year of construction 09/1968 (sedan + Cabriolet). Peugeot J7. Connection: M12x1. Or. No. 2086.04 + 2086.08. Made in Europe.

• Suitable for this article
• 
  Clutch line sealing ring (for the line between clutch taker + clutch
  1,18 €
• 
  Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for
  2,04 €
• 
  Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204
  1,14 €
• 
  P 404/504, circlip for clutch slave cylinder (72351 + 72224). For 36mm groove
  1,49 €

P 404/504, clutch taking cylinder. Piston diameter: 28,58mm. Connection thread: M10x1. Mounting

holes center to center: 48mm. Length over everything (without collar): 90mm. Suitable for Peugeot 404 to Ident: CH1012372. Peugeot 504 sedan + Cabrio, of year of construction 1/1969 to 1974. Peugeot 304 + J7. Talbot Murena, of year of construction 8/1981 to 1/1985. Or. No. 2086.11 + 2086.13. Made in Europe.

• Suitable for this article
• 
  Clutch line sealing ring (for the line between clutch taker + clutch
  1,18 €

P 404/504, crankshaft bearing, standard dimension. Suitable for Peugeot 404, from year of

construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Or. No. 011315, 011317, 011318.

P 404/504, crankshaft bearing, oversize 0,30. Suitable for Peugeot 404, from year of construction

1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc.

P 404/504, crankshaft bearing, oversize 0,50. Suitable for Peugeot 404, from year of construction

1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Diameter 58,9/58,0/56,7/56,65/54,4 width 29,5/21,5/29,3

P 404/504, generator, suitable for Peugeot 404, Peugeot 504, J5, J7. 12 V. Ampere: 50

Intergrierter battery charging regulator. Assembly position: 20°. Belt pulley: 67mm. the starter motor is a new part. An old part return is not necessary!

P 404/504/505, cylinder head screws (10 item). Suitable for Peugeot 404, 504, 505, J5 Citroen C25

All fuel engines (XM7 + XN1) from 1,6L to 2.0 liters engine capacity. Thread: M12. Length: 144mm. Or. No. 0204.21.

P 404/504/505/J5, engine gasket set. Suitable for Peugeot 404, 504, 505, J5, J7, J9. Petrol engines

1.6 + 1,8L (XM7, XM7A, XC7, XC7P, XM, XM7P). 86 mm bore. Inclusive Cylinder head gasket. Original supplier! Delivery without liners sealing rings!

• Suitable for this article
• 
  P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine
  7,28 €

P 404/504/604, elbow tubing seal above (fusion exhaust pipe to the exhaust elbow). Suitable for

Peugeot 404. Peugeot 504, J7. Peugeot 604, starting from serial number 655429 (for 604, you need 2 pieces). Outside diameter: 57mm. Inside diameter: 43mm. Or. No. 1710.07

P 404/504/604/J7, clutch master cylinder sealing set. For piston diameters: 19mm. Suitable for

Peugeot 204, 304, 404, 504, 505, 604, J7.

P 404/504/694/J7/HY, cylinder head gasket Diesel, for engines XD4.88, XDP4.88, XDP4.90, XDP88

XDP90, XDPX90. (1948cc + 2112cc). Suitable for Peugeot 404 D, 504 D, 604 D, J7 Diesel. Citroen HY Diesel. Or. No. 0203.70

P 404/504/C25/J5, cylinder head gasket. Suitable for Peugeot 404, 504, 505, J5, J7, J9. Citroen

C25. Suitable for petrol engines 1,6L + 1,8L. Installed starting from 09/1970 ((XM7, XM7A, XC7, XC7P, XM, XM7P). 1,73mm heavily. 4 grooves.

P 404/504/J5, connecting rod bearing screw. Suitable for Peugeot 404 Diesel, 504D, 505D, J7D, J9D

Suitable for engines 2,1L, 2,3L, 2,5L. Diameter: 10,25mm. Length: 58mm. Per piece. Or. No. 0607.16

P 404/504/J7, generator 12V, 50A, for Peugeot cars with control light! Single swivel arm

installation system on the right of 20°.

P 404/504/J7/C25, air filter. Suitable for Peugeot 504, starting from year of construction 10/1970

The air filter also partly fits in Peugeot 404, J7 + Citroen C25. Outside diameter: 119mm. Inside diameter: 91mm. Height: 170mm.

Piston + liner (1 fitting), suitable for Peugeot 404 Diesel, 504 Diesel, Peugeot J7 Diesel. Citroen

HY Diesel. For engine: XD8, XDP4/88. Engine capacity: 1948ccm. Bore: 88mm. Piston pin: 28 x 72,0mm. Piston rings: 2,0 - 2.0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 96mm. Height totally: 173,10mm. Outside diameter above: 106,30mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Piston + liner (4 fittings), suitable for Peugeot of 404 Diesel, 504 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD8, XDP4/88 (1 series). Engine capacity: 1948cc. Bore: 88mm. Piston pin: 28 x 74,40mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 94mm. Height totally: 173,20mm. Outside diameter above: 104,90mm. Height from downside to bulge (base) of the liner: 129mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/C25/J5, rear wheel bearing set. Outer diameter: 90mm. Inner diameter: 40mm. Width: 25mm

Suitable for Peugeot 504 Pick Up from year of construction 07/1981 to 02/1994. 504 GR Pick Up from 08/1990 to 10/1999. Peugeot 505 Break (04/1982 > 11/1995). Peugeot J5 (09/1990 > 03/1994). Citroen C25 (07/1981 > 02/1994). Or. No. 3326.28 + 3334.31 + 3325.52 + 3325.50. Citroen 9403221108

P 504/505/J5, engine gasket set (inclusive cylinder head gasket). Suitable for Peugeot 504, 505

J5. Fuel engines: XN1, XNA, XN2 starting from year of construction 1970. The sealing set is without water pump seal!

P 504/505/J5/C25, intake manifold seal for Peugeot 504, 505, J5. Citroen C25. Engines: Petrol

carburetor + injection engines. 1,8L + 2,0L. Engine code 169 (XM7T). Or. No. 0348.33

P 504/505/J5/C25, piston + liner (4 pieces), suitable for Peugeot 504, 505, J5, Citroen C25. For

engine: XN1, XN1P, XN1T/2. bore: 88mm. Piston pin: 23 x 74mm. Piston rings: 1,5 - 2.0 - 4,0mm. Dimensions of the liner = outside diameter down: 93mm. Height totally: 136,20mm. Outside diameter above: 101,90mm. Height from downside to bulge (base) of the liner: 99,10mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/J5/C25, air filter. Suitable for Citroen C25 (1,8E + 2,0E), of year of construction

09/1981 to 03/1994. Peugeot 504. Peugeot 505 (1.8 + 2.0), starting from year of construction 11/1980. Peuegot J5, starting from year of construction 01/1983. Outside diameter: 130mm. Inside diameter: 91mm. Height: 160mm. Or. No. 1445.63

P 504/505/J5/C25, cylinder head gasket for Peugeot 504,2,0. J5, J7. Citroen C25. Oversize +0,4mm

Suitable for engine XN1, XN2, XNA. Installed from year of construction 09/1970 to 09/1983. Or. No. 0209F4

P 504/505/J5/C25, cylinder head screws (10 pieces). Suitable for Peugeot 504, 505, J5, Citroen C25

Petrol engines from 1,6L to 2.0 liters engine capacity. Thread: M12x1,5. Length: 179mm. Or. No. 0204.51.

P 504/505/J5/J9. Piston ring set (for 1 piston), for XN1 engine (4 liners) + ZNJK engine (6

liners). Bore: 88mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 504 (4 liners + 6 liners), Peugeot 505, J5, J9.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/J7, cylinder head gasket. Suitable for Peugeot 504 2,3D. Peugeot 505 2,3D. J7 2,3D

1,53mm heavily. 2 grooves. Or. No. 0209.55

P 504/505/J7/HY, exhaust elbow seal, suitable for Indenor Diesel XDP88. Bore 94mm. Suitable for

Citroen HY Diesel. Peugeot 504D, 505D, J7D, J9D. Inside diameter: 40 x 30mm. Bore diameter: 9mm. Bore distance from center to center: 64mm.

P 504/505/J7/HY, intake manifold seal for Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY

Diesel. Peugeot 504D, 505D, J7D, J9D.

P 504/505/J7/J5/25, piston + liner (4 item). Suitable for Peugeot + Citroen C25. Engine: XM7T 169B

Bore: 84mm. Engine capacity: 1796cc. Piston rings: 1,5mm + 2,0mm + 4,0mm. Piston pin 23x70mm. Outside diameter down: 93mm. Outside diameter above: 99,2mm. Height totally: 136,2mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/J7/J9, generator. Suitable for Peugeot J7, J9, 505, 504. (Petrols with carburetor). 50A

Single swivel arm. Direction of rotation in in the clockwise direction. With intergrierten control device.

P 504/J5, radiator suitable for Peugeot 504 D (1.9 + 2,1L), Installed starting from year of

construction 1982. Peugeot J5 Diesel, starting from year of construction 10/1983. 825mm lengthens. Wide 415mm. Deep 32mm.

P 504/J5/J9. Piston ring set (for 1 piston), for XDP 4,90 Diesel engine. Bore: 90mm. Piston rings

2,0mm + 2,0mm + 2,0mm + 4,5mm. Suitable for Peugeot 504, J5, J9.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

J5, C25, indicator laterally completely. Peugeot J5 + Citroen C25. Or.Nr.632522

P J5/C25, clutch release sleeve. Suitable for Peugeot J5 (petrol + Diesel). Citroen C25 (petrol +

Diesel).

P J5/C25, clutch cable. Suitable for Peugeot J5, of year of construction 1981 to 1990. Citroen C25

of year of construction 1981 to 1994. Length: 1190mm. Sleeve: 920mm. Or. No. 2150.55

P J5/C25, clutch disk. Suitable for Peugeot J5 + Citroen C25. Of year of construction 1981 to 1988

(petrol + Diesels). Dimension: 215 x 145 x 3.2mm. 21 teeth.

P J5/C25, engine gasket set. Engine: XM7T (petrol 1.8). Suitable for Peugeot J5 + Citroen C25, of

year of construction 11/1981 to 02/1994. Or. No. 0197.15

P J5/C25, mirror on the left of Peugeot J5, Citroen C25. Mirror securement is made of metal. Or

No. 814918

P J5/C25/CX, clutch release sleeve. Suitable for Citroen CX 1+2, C25. Peugeot J5. Or. No. 2041.28 +

2041.53

hand brake cable Peugeot J7+J9 till 12/1968