clutch for Peugeot Sonstige-Peugeot

Pressure plate 228mm, stronger version. Manufacturer: Sachs! Suitable for Citroen CX 1 + CX 2. C25

D. Peugeot 505,2.2/2.8 GTI/2,5TD. Peugeot 604,3.0 + 2,5TD. Peugeot J5 2,5D.

Plastic line (nylon) between clutch taking cylinder and clutch master cylinder (without ends)

Outside diameter: 6,3mm. Inside diameter: 4,3mm. By meters. Suitable for Peugeot 204, 304, 404, 504, 505, 604. Only use DOT3 + DOT4 (never use DOT5 or DOT5.1!).

• Suitable for this article
• 
  Clutch line sealing ring (for the line between clutch taker + clutch
  1,18 €
• 
  Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for
  2,04 €
• 
  Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204
  1,14 €

Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without

pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)

Clutch line sealing ring (for the line between clutch taker + clutch transmitter). Suitable for

Peugeot 204, 304, 404, 504, 505, J7. Dimension: 6.5 x 10.2 x 7.5 mm. Or. No. 2091.03

• Suitable for this article
• 
  Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for
  2,04 €
• 
  Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204
  1,14 €
• 
  Plastic line (nylon) between clutch taking cylinder and clutch master cylinder
  7,28 €

Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204, 304, 404, 504, 505

J7. This sleeve is inserted to the end of the clutch line!

• Suitable for this article
• 
  Clutch line sealing ring (for the line between clutch taker + clutch
  1,18 €
• 
  Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for
  2,04 €
• 
  Plastic line (nylon) between clutch taking cylinder and clutch master cylinder
  7,28 €

Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for Peugeot 204, 304

404, 504, 505, J7. Or. No. 2091.01. Note: There was plastic line with 6,3mm, 7,0mm + 7,3mm diameter. If necessary rebore the screw on that suitable diameter.

• Suitable for this article
• 
  Clutch line sealing ring (for the line between clutch taker + clutch
  1,18 €
• 
  Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204
  1,14 €
• 
  Plastic line (nylon) between clutch taking cylinder and clutch master cylinder
  7,28 €

P 204/304/305, shaft seal for the clutch. Suitable for Peugeot 204, 304, 305. Dimension: 40 x 49,8

x 5,5mm. Or. No. 2074.07

P 304/305, clutch disk. Suitable for Peugeot 304 Diesel (1,4+1,5D), starting from year of

construction 1976. Peugeot 305 Diesel (1,5+1,6D). Dimension: 200 x 137 x 3,2mm. 28 teeth.

P 404, clutch release yoke, for hydraulic clutch. Suitable for Peugeot 404 Diesel, starting from

year of construction 1967. Peugeot 305, 309, 405. Citroen C15, Citroen BX 19, starting from 1987. Or. No. 2117.42

• Suitable for this article
• 
  Bush for the clutch fork. Suitable for some Peugeot 205. Citroen C15, BX. Or
  2,13 €

P 404/504, clutch release yoke for BA7 gearbox (Bowden cable). Suitable for Peugeot 404, starting

from year of construction 1967. Peugeot 504 + 505. Length: about 195mm. Or. No. 2117.41

P 404/504, circlip for clutch slave cylinder (72351 + 72224). For 36mm groove diameter. Suitable

for Peugeot 404 + 504, 505, J7.

P 404/504/505, Allen screw for the clutch securement. Suitable for Peugeot 404, 504 + 505. Thread

M12x1,5. Length: 64mm. Or. No. 6913.61

P 404/504/505, clutch release yoke, for hydraulic clutch (gearbox BA7). Suitable for Peugeot 404

starting from year of construction 1967. Peugeot 504, Peugeot 505. Or. No. 2117.39

P 404/504/505, clutch disk. Dimension: 215mm x 29 x 10mm. 6 springs, 10 teeth. Suitable for Peugeot

404, starting from year of construction 1967 (all petrols). Peugeot 504 + 505 petrols, with 215mm pressure plate and 6 springs in the clutch disk.

P 404/504/604/J7, clutch master cylinder sealing set. For piston diameters: 19mm. Suitable for

Peugeot 204, 304, 404, 504, 505, 604, J7.

P 504/505, clutch complet (Diesel). Suitable for Peugeot 504 D + 505 D. Engines: XD90, starting

from year of construction 08/1981 (2.1 L). XD2, starting from year of construction 08/1981 (2.3 L). For gearboxes: BA7, BA7/5. Reproduction with centering mandrel. Diameter: 215mm. Teeth: 10. Splines outside diameter: 29 mm. Or. No. 2001.92 + 2004.88

P 504/505, clutch taking cylinder. Suitable for Peugeot 504 petrol, starting from year of

construction 11/74 (4 + 6 liners). Peugeot 505 + 604. Piston diameter: 28,57mm. Connecting thread: M10x1. Or. No. 2086.10. Made in Europe.

• Suitable for this article
• 
  P 404/504, circlip for clutch slave cylinder (72351 + 72224). For 36mm groove
  1,49 €

P 504/505/604, clutch master cylinder. Suitable for Peugeot 504 + 505, all petrols starting from

year of construction 11/1974. Peugeot 504 + 505 all Diesel, starting from 11/1970. Peugeot 604 Diesel + V6. Piston diameter: 19,05mm. Connecting thread: M10x1. Distance fixing holes: 50mm. Or. No. 2095.15 + 2095.17 + 2094.18. Made in Europe.

P 505/604. Guide bearing (pilot bearing) for the clutch. Suitable for Peugeot 505 + 604. Outside

diameter: 40,0mm. Inside diameter: 17,0mm. Overall height: 12,0mm. Or. No. 524090

P J5/C25/CX, clutch release sleeve. Suitable for Citroen CX 1+2, C25. Peugeot J5. Or. No. 2041.28 +

2041.53

Shaft seal camshaft. Dimension: 16 x 21 x 4,5. Suitable for Peugeot J5 petrol. Citroen C25 petrol

Peugeot 504 2.0 petrol. Peugeot 504 Diesel (1.9 + 2.3). Peugeot 505 petrol + Diesel. Peugeot J7 Diesel.