engine block for Peugeot Sonstige-Peugeot

Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil pans, valve cap

valve timing cover. Very good quality. Made in Germany.

• Suitable for this article
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €

HYLOMAR engine sealing material, permanent elastic engine sealing, indispensable with engine

e overhaul, 80ml. Hylomar M is temperature resistant between -50°C and +250°C and can be applied for sealing sealing surfaces and threaded pieces.

Oil drain screw (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm (interior

square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6. Or. No. 0311.07 + 0311.04

• Suitable for this article
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw magnetic (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm

(interior square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6

• Suitable for this article
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw magnetic (interior square 8x8). Thread: M16 x 1,5. Suitable for Peugeot 204, 304

404, 504, 604, 505, J5, J7, J9. Renault R5. Citroen CX, BX, ZX, C15. Or. No. 2221.11

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €
• 
  Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505

J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!

Oil pressure switch (Diesel). Thread M18 x 1,5. Suitable for Peugeot 204D, 304D, 305D, 404D, 504D

505D, 604D. Citroen HY Diesel. Renault Diesel: R9, R11, R18, R20, R25, R30. Talbot Tagora Diesel. Response pressure: 0,8 bar. Or. No. 1131.10 . Due to the design, there is always a drop of oil at the electrical connection. Alternatively, the modern oil pressure switch 70733 can be installed.

• Suitable for this article
• 
  Oil pressure switch Peugeot. Suitable for Peugeot 104. 203, 204, 304, 305, 403
  12,79 €

Oil pressure switch Peugeot. Suitable for Peugeot 104. 203, 204, 304, 305, 403, 404, 504. Citroen

VISA Thread: M18 x 1.5. Switching pressure: 0.35 bar. This modern oil pressure switch has a moulded electrical connection. Oil leakage at the connection is not possible during long periods of non-use (winter break)!

Oil pressure switch. Thread: M14 x 1,5. Response pressure: 0,2 to 0.45 bar. Suitable for Renault R4

(starting from year of construction 1967), R5, R16. Citroen CX1 2000-2200, CX2 20RE. Peugeot 505,2,0 + 2,2.

Oil pressure switch. Thread: M18 x 1,5. Suitable for Peugeot 504 (4 liners + V6). Peugeot 305 +

505, 205, J5, J7. Response pressure: 0,6 bar. Or. No. 1131.48 . Due to the design, there is always a drop of oil at the electrical connection. Alternatively, the modern oil pressure switch 70733 can be installed.

• Suitable for this article
• 
  Oil pressure switch Peugeot. Suitable for Peugeot 104. 203, 204, 304, 305, 403
  12,79 €

Oil pan seal Peugeot Diesel. For the following engines: XD2, XD4.88, XD4.90, XD2S, XD3, XD3TE

XDP88, XDP90, CD2P94. Suitable for Peugeot 404, 504, 505, 604, J7, J9. Citroen HY Diesel. Or. No. 0313.23

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Valve timing cover seal. Suitable for Peugeot 404 with carburetor engine. Peugeot 504 (carburetor)

505 (carburetor). Or. No. 0321.11. Made in Germany.

Camshaft drive chain tensioner. Suitable for diesel engines: Peugeot 404, 504, 505, J7, J9, Tagora

Citroen HY. Or. No. 0849.04

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2

XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Camshaft drive chain, 58 chain links (duplex, double chain). Suitable for Peugeot 404, of year of

construction 1960 to 1974. Peugeot 504, 505, 604, J7, J9, Renault R5. Engines: U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0816.07

Camshaft drive chains gear wheel. Suitable for Peugeot 304, 304S, 305. Number of teeth: 38. For

simplex camshaft drive chain. Branded article! Or. No. 0805.13.

Cam follower (diameter: 23,98mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot

504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot 505, Peugeot 604, Peugeot J7. Citroen HY. Or. No. 0942,13 + 7910031879. Please compare the dimensions!

Push rod for inlet + exhaust (6.5 x 242,5mm). Suitable for diesel engines: Peugeot 403D, Peugeot

404D, Peugeot 504D, Peugeot 505D, Peugeot J7D. Citroen HY CD. per piece. Or. No. 0940.08

Push rod inlet (6.75 x 185mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot 504

Peugeot 505, Peugeot J7. Or. No. 0939.03