crankshaft-camshaft-piston-flywheel for Peugeot Sonstige-Peugeot

Diesel, liner gasket bottom (4x). Suitable for diesel engine: XD85, TMD85, XD88, XDP88, XD4x88

XD90, XD4x90. For the following vehicles: Peugeot 403, 404, 504, J7. Citroen HY Diesel.

Piston ring set, for 4 pistons. Suitable for HY Diesel. Peugeot 404 Diesel. Peugeot 504 Diesels, J7

7 Diesel. Engine: XD, XDP, TMD4.88. Bore: 88,0mm. Piston rings: 2,0 + 2.0 + 2.0 + 4,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 104/204/304, shaft seal differential on the left. Suitable for Peugeot 104, 204, 304, 305, 205

Suitable for all fuel + Diesel engines. Dimension:: 40 x 58 x 10mm. Or. No. 3121.09

P 204/304/305, bottom liner seal (4x). Suitable for Peugeot 204, 304, 305. Only for XL5, XK5, XR5

XR5S engines.

P 204/304/305, shaft seal 40 x 49.5 x 5,5-7mm, for the crankshaft at the front side. Suitable for

Peugeot 204, 304, 305. For engine: XK5. Or. No. 2074.07

P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine block). Dimensions

78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany

P 404/504, crankshaft bearing, oversize 0,30. Suitable for Peugeot 404, from year of construction

1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc.

P 404/504, crankshaft bearing, oversize 0,50. Suitable for Peugeot 404, from year of construction

1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Diameter 58,9/58,0/56,7/56,65/54,4 width 29,5/21,5/29,3

P 404/504/505, liner gasket bottom. Fits Peugeot 404 from year of construction 01/1970 (engine XC7

CM7). 504/505 from 01/1971 (engine XM7, XN1, XN1A). J7 (engine XM7P + XC7P). Engines until year of construction 06/1984

P 404/504/505, belt pulley on the crankshaft. Suitable for Peugeot 404, 504, 505. Or. No. 0515,46 +

0515E2. Diameter: 13,10cm. Outside diameter of the scroll seal: 45,35mm.

P 404/504/J5, connecting rod bearing screw. Suitable for Peugeot 404 Diesel, 504D, 505D, J7D, J9D

Suitable for engines 2,1L, 2,3L, 2,5L. Diameter: 10,25mm. Length: 58mm. Per piece. Or. No. 0607.16

P 504 V6, piston ring set (for 1 piston), for 6 liners. Engine: ZNJK. Engine capacity: 2849cc

Bore: 91mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 505 V6, 604 V6. Renault 30, Alpine V6.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/604, liner gasket bottom (4x). Suitable for Peugeot 504 (engine XN2) + 604 + 505 (engine

XN6). Outer diameter: 99.6mm. Inner diameter: 93.2mm.

P 504/505/J5/C25, piston + liner (4 pieces), suitable for Peugeot 504, 505, J5, Citroen C25. For

engine: XN1, XN1P, XN1T/2. bore: 88mm. Piston pin: 23 x 74mm. Piston rings: 1,5 - 2.0 - 4,0mm. Dimensions of the liner = outside diameter down: 93mm. Height totally: 136,20mm. Outside diameter above: 101,90mm. Height from downside to bulge (base) of the liner: 99,10mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/J5/J9. Piston ring set (for 1 piston), for XN1 engine (4 liners) + ZNJK engine (6

liners). Bore: 88mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 504 (4 liners + 6 liners), Peugeot 505, J5, J9.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/J5/J9. Piston ring set (for 1 piston), for XDP 4,90 Diesel engine. Bore: 90mm. Piston rings

2,0mm + 2,0mm + 2,0mm + 4,5mm. Suitable for Peugeot 504, J5, J9.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Shaft seal for the camshaft. Dimension: 35 x 50 x 8. Suitable for Peugeot Diesel engines: XUD7

XUD9, XUD11 to year of construction 01/1994. Or. No. 0236.14

Shaft seal camshaft. Dimension: 16 x 21 x 4,5. Suitable for Peugeot J5 petrol. Citroen C25 petrol

Peugeot 504 2.0 petrol. Peugeot 504 Diesel (1.9 + 2.3). Peugeot 505 petrol + Diesel. Peugeot J7 Diesel.

Camshaft drive chain tensioner. Suitable for diesel engines: Peugeot 404, 504, 505, J7, J9, Tagora

Citroen HY. Or. No. 0849.04

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2

XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Camshaft drive chain, 58 chain links (duplex, double chain). Suitable for Peugeot 404, of year of

construction 1960 to 1974. Peugeot 504, 505, 604, J7, J9, Renault R5. Engines: U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0816.07

Camshaft drive chains gear wheel. Suitable for Peugeot 304, 304S, 305. Number of teeth: 38. For

simplex camshaft drive chain. Branded article! Or. No. 0805.13.

Cam follower (diameter: 23,98mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot

504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot 505, Peugeot 604, Peugeot J7. Citroen HY. Or. No. 0942,13 + 7910031879. Please compare the dimensions!

Push rod for inlet + exhaust (6.5 x 242,5mm). Suitable for diesel engines: Peugeot 403D, Peugeot

404D, Peugeot 504D, Peugeot 505D, Peugeot J7D. Citroen HY CD. per piece. Or. No. 0940.08

Push rod inlet (6.75 x 185mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot 504

Peugeot 505, Peugeot J7. Or. No. 0939.03

Plug screw in the crankshaft. Dimension: M24 x 1,5. Suitable for Peugeot 204, 304, 305, 404, 504

505. Or. No. 0507.06

Plug screw crankshaft. Suitable for Peugeot 404, 504, 505. Thread: M22 x 1,5. 050706