Door window in front, retaining pin made from stainless steel. Screwed on to the flap window frame
The pin engages in the window holder.
for Renault 2CValt
1702 Articles | Page 7 of 35
2CV, Door window in front, connecting plate for the frame of the flap window. joining the front and
the rear frame. Suitable for Citroen 2CV. Or. No. AZ96187. Made in Germany.
2CV, Door window in front, connection bracket for the window frame. 2x M4 thread. Suitable for
Citroen 2CV. Or.Nr. A961-87A. Made in Germany.
Door strap inside. Color grey. Suitable for Citroen 2CV with high door linings. The door strap is
about 260mm long and with the sheet metals 18130 locked.
Door strap inside. Color black. Suitable for Citroen 2CV with high door linings. The door strap is
about 260mm long and with the sheet metals 18130 locked. Made by Franzose/CiPeRe
2CV, Door lock, locking pivot long (Square pin that the lockcylinder of the door takes up). Overall
length: 88mm. Attention: There are cheaper replicas from Asia that break very quickly. !! Please order the retaining clip 16391 for the locking cylinder separately or reuse the old one!
2CV, Door trim for the rear door, reproduction, made of polished aluminium. The moulding is
supplied with fixing clips. Length: 660 mm, width: 6 mm
2CV, Door trim for the front door, reproduction, made of polished aluminium. The trim are supplied
with clamps. Length: 750 mm, wide ones: 6 mm
2CV, floorpan plate centrically for the original chassis of Citroen 2CV, Dyane. (semicircular
recess). Made in Europe.
2CV, Reinforcement cross-beam under the seat bench, for Citroen 2CV. This cross-beam is welded
crosswise and the transition to the sheet metal between the wheel housings and the luggage compartment. Made in Germany.
2CV, wind catch on the B-pillar to the rear door. Colour grey. Left + right fitting. For Citroen
2CV up to 1970 (6 symmetrically arranged fastening holes!). This is the rubber (plastic) which is attached to the B-pillar and to the rear door.
2CV, Windshields - ornamental frame, for Citroen 2CV AZAM. The ornamental frame is production from
high-grade steel. Ordered please the connection clip specially!
2CV, Windscreen seal for Citroen 2CV AZAM. The seal is for the mounting of a trim frame! The trim
frame was only mounted on the Belgian 2CV AZAM. Attention: The bonding of the butt edges of the gasket are really bad. But we still offer this rubber, because there are no other rubbers for the AZAM. If you need it, it is better than no rubber!!!
Windshield frame completely, inclusive hood hinge. Suitable for Citroen 2CV. Very good
reproduction, like original. The transition of the corners to the a-post is substantially better, than with the sheet metal 15297. The windshield frame is electrolytically galvanized. Made in Europe.
Windshield frame cross beam down. Suitable for all Citroen 2CV. (Cross beam above the Ventilation
shutter, from the inside seen.) Made in Europe.
2CV, windscreen frame, aluminium rail at the top of the soft top. This rail is used to clamp the
original rubber seal onto the windscreen frame. The aluminium strip has a polished finish. This aluminium rail complies with the original specifications and is designed for the original seal (our item number 17067). We have the rail manufactured to our own specifications and have made it slightly more curved. This ensures it sits more securely on the windscreen frame than the original aluminium rail.
2CV, windscreen frame, aluminium rail at the top of the soft top. This rail is used to clamp the
improved rubber seal (17065) onto the windscreen frame. This aluminium rail is specifically designed for seal 17065. As the 17065 seal has an additional sealing lip, the aluminium rail must be designed slightly differently. It is not as strongly curved as our 17070 rail. However, when used in conjunction with the 17065 seal, it is also very securely fixed to the windscreen frame!
2CV, windscreen frame, seal under the aluminium rail, at the top of the roof. (Rolling roof seal)
This seal has an additional rubber lip. This ensures that the aluminium rail is fixed much more securely to the roof. Suitable for Citroën 2CV, with a year of construction between 1960 and 1990. Or. No. A971-80A. We recommend our Part No. 17073 as a better-fitting aluminium rail.
2CV, windscreen frame, seal under the aluminium strip, at the top of the roof. This seal is
manufactured exactly like the original seal fitted by Citroën. Suitable for Citroën 2CVs with years of construction 1960 to 1990. Or. No. A971-80A. The corresponding aluminium strip is part no. 17070.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the upper, rear handle, which is
locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the lower, rear handle, which is
locked under the floor pan. Note: Connector with 6mm screws! Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, galvanizes! That is the upper, rear handle, which is locked under
the floor pan. Suitable for Citroen 2CV6 + 2CV4. Dyane, AK
2CV6, exhaust fixture rear, galvanizes! That is the lower, rear handle, which is locked under the
floor pan. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust fixture 2CV6, in front, from high-grade steel! The handle is locked under the floor
pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, in front, galvanizes. The handle is locked under the floor pan
Suitable for Citroen 2CV6 + 2CV4.
Cap for the radius arm bearing rear. (flatten version, for vehicles with brake hoses rear)
Suitable for Citroen 2CV, Dyane, AK, AMI, to year of construction 06/1970.
1702 Articles | Page 7 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
