for Renault 504-604

brake pads, front, Peugeot 504,505,604, System Bendix, 105mm wide, 65mm high, 18mm thick, Or.no

425021

P 504/505/604, brake caliper in front. Depending upon assembly position: Behind the axle on the

right or before the axle on the left. Suitable for Peugeot 504, 505 + 604. Brake system: ATE. Or. No. 4400.48. In the exchange, plus 150 Euro Old part deposit. For brake disk thickness: 12,9mm. 1 piston. Piston diameter: 54mm.

P 504/505/604, front brake disc set. Suitable for Peugeot 504 V6 (Cabriolet + Coupe) from 1974 to

1984. Peugeot 505 + 604. The brake discs are ventilated. Diameter: 273mm. Or. No. 4246.70 + 4246.H2

P 504/505/604, ball pin (ball joint) down. Fits on the left of or on the right. Thread: M12 x 1.5

Suitable for Peugeot 504, 505, 604. Or. No. 3640.15

P 504/505/604, ball pin (ball joint) down. Fits on the left of or on the right. Thread: M12 x 1.5

Suitable for Peugeot 504, 505, 604. Or. No. 3640.25

P 504/505/604, radiator hose reduction connection. Diesel engine: XD88, XD90, XD2. Suitable for

Peugeot 504D (starting from year of construction 1970), 505D, 604D. Inside diameter: 32,0 + 38,0mm. Or. No. 1350.27

P 504/505/604, radiator hose down (connecting tube to the radiator). Diesel engine 2.3 (XD2) + 2,5

Engine capacity: 2304cc + 2498cc. Suitable for Peugeot 504 D, 505 D + TD, 604 TD. Or. No. 1350.46

P 504/505/604, clutch master cylinder. Suitable for Peugeot 504 + 505, all petrols starting from

year of construction 11/1974. Peugeot 504 + 505 all Diesel, starting from 11/1970. Peugeot 604 Diesel + V6. Piston diameter: 19,05mm. Connecting thread: M10x1. Distance fixing holes: 50mm. Or. No. 2095.15 + 2095.17 + 2094.18. Made in Europe.

P 504/505/604, liner gasket bottom (4x). Suitable for Peugeot 504 (engine XN2) + 604 + 505 (engine

XN6). Outer diameter: 99.6mm. Inner diameter: 93.2mm.

P 504/505/604, steering sleeve (power steering). Large opening. Suitable for Peugeot 504 from 1980

years of construction. Peugeot 505 + 604. Connection diameter: approx. 40mm. Or. No. 4066.17. The power steering normally has a sleeve with a large and one with a small opening.

• Suitable for this article
• 
  P 504/604, Steering sleeve (for power steering), small opening.. Per piece
  9,82 €

P 504/505/604, wheel bearing rear. Dimension: 84 x 42 x 36mm. Suitable for Peugeot 504 sedan, of

year of construction 1968 to 1985. 504 Cabrio + Coupe, of year of construction 1976 to 1981. Peugeot 505 + 604. Or. No. 3326.13. Made in Spain

• Suitable for this article
• 
  Hub nut. Thread: M18 x 1,5. Suitable for Peugeot 104, 204, 304, 403, 504
  2,73 €
• 
  nut, driveshaft, Peugeot 104,204,304,305,404,504. thread: M16x1,5 , wrench
  4,87 €
• 
  Hub nut rear, Peugeot 404, 505, 505, 604. Thread M25 x 1,5, width accross flats
  4,94 €

Wheel bearing Peugeot 504, 505, 604. Measurements: 25x47x15mm.

P 504/505/604, wheel bearing in front, interiorlaterally. Dimension: 32 x 58 x 17mm. Suitable for

Peugeot 504, 505, 604. Talbot Togara. Or. No. 3730.17 Made in Spain

P 504/505/604, repair set ball joint (ball and socket joint - wishbone). Firs on the left of or on

the right. For Peugeot 504, 505 + 604. Or. No. 3640.13

Mounting bush shock absorber rear for Peugeot 504 (A,M) 1,8 from 06/1968 to 02/1971, for Peugeot

t 505 1,8 from 06/1981 to 10/1985, for Peugeot 604 2,3D from 09/1979 to 05/1983. Inside diameter: 12mm, outside diameter: 30mm, length: 24mm, total length: 73,8mm. Or.no.: 524816

Mounting bush wishbone for the front axle, for Peugeot 504 from 07/1968 to 02/1971, for Peugeot 505

5 from 06/1981 to 10/1985, and for Peugeot 604 from 09/1979 to 05/1983. Diameter 38mm, length 42mm, inside diameter of 16mm.

P 504/505/604, bonded-rubber bushing, for the securement from the assisted steering cylinder (the

simple power steering). Suitable for Peugeot 504, 505, 604. Inside diameter: 12mm. Outside diameter: 22mm. Length inside: 24mm. Length outside: 20mm. Or. No. 4059.05

P 504/505/604, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height

ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot to year 1980. Peuheot 505 + 604.

P 504/505/604, anti roll bar rod, rear axle. Suitable for Peugeot 504 sedan (apart from Luxe), 504

Cabriolet + Coupe. 505 sedan, 604. Length over everything: about 175mm. Or. No. 5178.03

P 504/505/604, Alpine A310. Mounting (fixture) rear axle (rubber metal handle). Dimension: 69 x

40mm. Heavy one: 24/38mm. Suitable for Peugeot 504, 505, 604. Renault Alpine A310. Or. No. 5152.18

P 504/505/C25/J5, rear wheel bearing set. Outer diameter: 90mm. Inner diameter: 40mm. Width: 25mm

Suitable for Peugeot 504 Pick Up from year of construction 07/1981 to 02/1994. 504 GR Pick Up from 08/1990 to 10/1999. Peugeot 505 Break (04/1982 > 11/1995). Peugeot J5 (09/1990 > 03/1994). Citroen C25 (07/1981 > 02/1994). Or. No. 3326.28 + 3334.31 + 3325.52 + 3325.50. Citroen 9403221108

P 504/505/J5, engine gasket set (inclusive cylinder head gasket). Suitable for Peugeot 504, 505

J5. Fuel engines: XN1, XNA, XN2 starting from year of construction 1970. The sealing set is without water pump seal!

P 504/505/J5/C25, intake manifold seal for Peugeot 504, 505, J5. Citroen C25. Engines: Petrol

carburetor + injection engines. 1,8L + 2,0L. Engine code 169 (XM7T). Or. No. 0348.33

P 504/505/J5/C25, piston + liner (4 pieces), suitable for Peugeot 504, 505, J5, Citroen C25. For

engine: XN1, XN1P, XN1T/2. bore: 88mm. Piston pin: 23 x 74mm. Piston rings: 1,5 - 2.0 - 4,0mm. Dimensions of the liner = outside diameter down: 93mm. Height totally: 136,20mm. Outside diameter above: 101,90mm. Height from downside to bulge (base) of the liner: 99,10mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/J5/C25, air filter. Suitable for Citroen C25 (1,8E + 2,0E), of year of construction

09/1981 to 03/1994. Peugeot 504. Peugeot 505 (1.8 + 2.0), starting from year of construction 11/1980. Peuegot J5, starting from year of construction 01/1983. Outside diameter: 130mm. Inside diameter: 91mm. Height: 160mm. Or. No. 1445.63

P 504/505/J5/C25, cylinder head gasket for Peugeot 504,2,0. J5, J7. Citroen C25. Oversize +0,4mm

Suitable for engine XN1, XN2, XNA. Installed from year of construction 09/1970 to 09/1983. Or. No. 0209F4

P 504/505/J5/C25, cylinder head screws (10 pieces). Suitable for Peugeot 504, 505, J5, Citroen C25

Petrol engines from 1,6L to 2.0 liters engine capacity. Thread: M12x1,5. Length: 179mm. Or. No. 0204.51.

P 504/505/J5/J9. Piston ring set (for 1 piston), for XN1 engine (4 liners) + ZNJK engine (6

liners). Bore: 88mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 504 (4 liners + 6 liners), Peugeot 505, J5, J9.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/J7, cylinder head gasket. Suitable for Peugeot 504 2,3D. Peugeot 505 2,3D. J7 2,3D

1,53mm heavily. 2 grooves. Or. No. 0209.55

P 504/505/J7/HY, exhaust elbow seal, suitable for Indenor Diesel XDP88. Bore 94mm. Suitable for

Citroen HY Diesel. Peugeot 504D, 505D, J7D, J9D. Inside diameter: 40 x 30mm. Bore diameter: 9mm. Bore distance from center to center: 64mm.

P 504/505/J7/HY, intake manifold seal for Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY

Diesel. Peugeot 504D, 505D, J7D, J9D.

P 504/505/J7/J5/25, piston + liner (4 item). Suitable for Peugeot + Citroen C25. Engine: XM7T 169B

Bore: 84mm. Engine capacity: 1796cc. Piston rings: 1,5mm + 2,0mm + 4,0mm. Piston pin 23x70mm. Outside diameter down: 93mm. Outside diameter above: 99,2mm. Height totally: 136,2mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504/505/J7/J9, generator. Suitable for Peugeot J7, J9, 505, 504. (Petrols with carburetor). 50A

Single swivel arm. Direction of rotation in in the clockwise direction. With intergrierten control device.

Carburetor repair set Peugeot 504, 505, Talbot Tagora. Carburetor Solex 32/35 TMIMA + 32/35 MIMSA.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

P 504/604, drive shaft collar, gearbox side (with sheet metal casing). Suitable for Peugeot 504 +

604. Connections: 82,6 + 26,7mm. The metal casing is 95mm long. Or. No. 3293.55

caliper repair set Peugeot 504-604 System ATE, brake piston 54mm

P 504/604, brake disk set in front. Diameter: 273mm. Heavy one: 12,7mm. Snap diameter: 76mm. 4

hole. Suitable for Peugeot 504, 505, 604. Or. No. 4246.42 + 4246.84

P 504/604, window lifter door on the left. For Peugeot 504 sedan (the window lifter fits for the

front and rear door). For Peugeot 604 (only rear door). Or. Nr. 9221.25

P 504/604, window lifter door on the right. For Peugeot 504 sedan (the window lifter fits for the

front and rear door). For Peugeot 604 (only rear door). Or. No. 9222.24

P 504/604, Steering sleeve (for power steering), small opening.. Per piece. Oval opening 65/50mm

Opposite opening: 18mm. Total length, compressed: 120mm. Or. No. 4066.10. The power steering normally has a sleeve with a large and one with a small opening.

• Suitable for this article
• 
  P 504/505/604, steering sleeve (power steering). Large opening. Suitable for
  8,83 €

P 504/604, collar for the steering column (power steering). Suitable for Peugeot 504 + 604. Or. No

4066.16

P 504/604, oil filter for the automatic transmission. Suitable for Peugeot 504 V6 (Cabrio + Coupe)

Peugeot 604 V6. Or. No. 2263.09. Original Peugeot, no reproduction (NOS)

P 504/604, plastic seal (50mm long), for the chrome sheet metals on the box sill. Suitable for

Peugeot 504 + 604. Or. No. 9066.11. Original Peugeot, no reproduction.

P 504/604, Repair set (rubbers) for rear brake caliper. Brake system Lucas. For piston diameter

43mm (floating caliper - disc brake). The hole in the dust boot has 20mm diameter. Suitable for Peugeot 504, 505 + Peugeot 604.

• Suitable for this article
• 
  P 504, piston for rear brake caliper. Brake system: Lucas. Suitable for Peugeot
  52,46 €
• 
  P 504, piston for rear brake caliper. Brake system: Lucas. Suitable for Peugeot
  57,42 €

P 504/604, 5-speed gear knob, suitable for Peugeot 504 (convertible, coupé + saloon). Peugeot 604

Or. No. 2403.31

P 504/604, gear shift knob, suitable for 504, 604, 505. 4 gear gearbox

P 504/604, bonded-rubber bushing for the wishbone front axle. Suitable for Peugeot 504, of year of

construction 07/1968 to 02/1971. Peugeot 604, of year of construction 09/1979 to 05/1983. Inside diameter: 16,0mm. Outside diameter: 38,0mm. Length inside: 41,5mm. Length outside: 41,4mm. Or. No. 356106.

P 504/604, bonded-rubber bushing, for the wishbone front axle. Suitable for Peugeot 504, starting

from year of construction 1974. Peugeot 604. Inside diameter: 14mm. Outside diameter: 33mm. Length inside: 44mm. Length outside: 32mm. Or. No. 3523.16

P 504/604, tie rod end (fits on the left or on the right). For Peugeot 504, to year of construction

12/1979. Peugeot 604. Thread: M14x1,5 Made in Italy

P 504/604, fuel filler cap lockable, exclusively suitable for Peugeot 504 V6 (Cabrio + Coupe)

Peugeot 604 V6. Not suitable for Peugeot 2,0l (4 liners)!