2CV, Luggage compartment hood. Emblem "CITROEN" swung, from 3mm high-grade steel. Made in Germany
by Franzose. The signature is about 180mm long, and 65mm highly. The emblems are fastened with 2x M3 nuts (our article number 20166).
luggage compartment lid, attachments, rear doors for Renault HY
41 Articles
Outer hinge strip (Female) Citroen HY. For the bonnet, side flaps, rear flap. 145cm lengthens
Accurate reproduction of the original hinge strip. This part of the hinge is welded at the body. The hinges are manufactured in complex manual work in the European Union.
Outer hinge strip (Female) Citroen HY. For the bonnet, doors, side flaps, rear flap. 145cm
lengthens. Accurate reproduction of the original hinge strip, with extended welding sheet metal (for strong rust damage). This part of the hinge is welded at the body. The hinges are manufactured in complex manual work in the European Union.
Rubber seal profile (by meters), for nearly all older Citroen, 2CV, HY, DS. (Door + luggage
compartment seals)! Made in Germany! Quality: EPDM 317. Easily rubbed in with talcum powder. Wide one: 25,5mm
Rubber seal profile, more curved. We let produce this profile rubber in Germany. The rubber is more
curved in itself and can seal so better (e.g. bonnet, rear flap). Suitable for Citroen HY. By meters. Wide one: about 29,5mm. Note: Do not unse this rubber for the doors!
Rubber rosette (seal) under the door handle + luggage compartment handle. Suitable for Citroen
11CV, 15CV + Citroen HY. Dimension: 60 x 35 x 5mm
Rubber rosette under the luggage compartment handle. Suitable for Citroen 11CV + 15CV, to year of
construction 07/1952. Citroen HY. Diameter: 46mm. High: 4mm. Or. No. 224192R
Retaining clip for the seal from the luggage compartment lid. Suitable for Citroen 11CV/15CV
Citroen DS. Dimension: 10 x 14mm. Also suitable for other French vehicles. Or. No. 802698, DM453-120C
Rear flap above Citroën HY (small rear window). Reproduction from GRP (synthetic) and metal, also
in-laminated metal hinge! Made one in European Union.
Rear flap above Citroen HY, only outer skin with big window. Reproduction from GRP (synthetic)
Made one in European Union
Rear flap above Citroen HY, only outer skin with small window. Reproduction from GRP (synthetic)
Made one in European Union
Interior hinge strip (Male) Citroen HY. The hinge has a longer welding sheet metal. For the bonnet
doors, side flaps, rear flap. 145cm lengthens. Accurate reproduction of the original hinge strip. This part of the hinge is welded at doors, hood and the bonnet. The hinges are manufactured in complex manual work in the European Union.
Interior hinge strip (Male) Citroen HY. The hinge is down additionally curved around 180°. For the
bonnet (a reinforcement results) and the rear, lower doors. 145cm lengthens. Accurate reproduction of the original hinge strip. This part of the hinge is welded at doors and the bonnet. The hinges are manufactured in complex manual work in the European Union.
Interior hinge strip (Male) Citroen HY. For the bonnet, doors, side flaps, rear flap. 145cm
lengthens. Reproduction of the original hinge strip. This part of the hinge is welded at flaps and the bonnet. For the doors this hinge is body-laterally welded. The hinges are manufactured in complex manual work in the European Union.
Interior hinge strip (Male) Citroen HY. Particularly produced for the rear doors, if the side
panels were exchanged. The hinge has an additional bending. Thus a repair is substantially simpler. Length: 145cm.
License plate fixture Citroen HY Pick UP. Also universal usable. E.G. Peugeot 203 Pick UP. For
license plate measurement: 200 x 330mm
Spare wheel flap, suitable for Citroen HY. Reproduction from GRP (synthetic) and metal fixtures
Made one in European Union.
Sliding door guide bow (the clip leads the sliding door in the rails). Suitable for Citroen HY. Or
No. H842-80. Per piece. Made in Germany.
Striker plate underlay. Special coarse seal, so that the striker plate cannot slip (anti-slide)
Suitable for Citroen DS, to year of construction 1971. Citroen HY, starting from year of construction 1968.
Side plate on the left (corrugated sheet), behind the driver's cabin (before the spare wheel flap)
Suitable for Citroen HY. Completely with lower cross-beam. Length: about 92cm. Height: 59cm. Made one in European Union, Top quality! Or. No. H821-97
Side plate on the left, behind the driver's cabin. Suitable for Citroen HY. Length: about 92cm
Height: about 59,0cm. Produced from GRP. (very good reproduction, you can see the spotwelds!)
Side flap, from synthetic. Suitable for Citroen HY with long body and Pick UP. Under cross bar is
interiorlateral. HY with short wheel base, do not have this flap. Good reproduction with metal frame and synthetic.
Side flap (panel), made of metal. Suitable for Citroen HY with long body and Pick UP. Under cross
bar is interiorlateral. HY with short wheel base, do not have this flap. Accurate reproduction made of metal.
Safety sheet on the left (centrically in the hinge). For Citroen HY, bonnet and the tail gate. For
AZU: Tail gate on the left. Or. No. H844-93
Safety sheet on the right (centrically in the hinge). For Citroen HY, bonnet and the tail gate. For
AZU: Tail gate on the right. Or. No. H844-93A
Conversion kit for the upper rear flap. Suitable for Citroen HY. This conversion kit contains all
parts, in order to convert the flap on gas pressure shock absorbers. Very practically! Caution, the reinforcement cross-beams in the rear flap must be in a perfect condition.
Corrugated sheet repair sheet metal, largely. Suitable for Citroen HY. 12 flanges. Measurements
600 x 1000mm. Accurate copy of the original flanges!
41 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
