rear body components for Renault HY
45 Articles
Aluminum edging profile (1000mm)for the side metal sheets in the box body. Fits to Citroen HY
first model. Original sheets were just screwed. These profiles are made of aluminim! For a classic HY version you need: 2x 2400mm, 2x 1630mm, 4x 630mm. Item n° 48262 is 1500 mm profile. Item n° 48263 is 1000 mm profile.
Aluminum edging profile (1500mm)for the side metal sheets in the box body. Fits to Citroen HY
first model. Original sheets were just screwed. These profiles are made of aluminium! For a classic HY version you need: 2x 2400mm, 2x 1630mm, 4x 630mm. Item n° 48262 is 1500 mm profile. Item n° 48263 is 1000 mm profile.
Profile for the transition from driver's cabin roof to box body. This profile was mounted with the
normal box body and also with vehicles with increased box body. Suitable for Citroen HY. Or.Nr. H824-99
Rear end panel cross-beam completely. Suitable for Citroen HY to year of construction 1963. The
cross-beam is supplied inclusive the bumper bows.
Rear end panel cross-beam completely. Suitable for Citroen HY, with rear bumper (not suitrable for
HY with pipe bow). Or. No. HY744-67
Tail sheet metal on the left + on the right for increase of the roof (175mm highly). This sheet
metals are welded on the original tail sheet metal! (1 pair)
Tail sheet metal on the left down (without cross-beam on the rear side). Suitable for Citroen HY
to year of construction 07/1961. Or. No. HP823-2A
Tail sheet metal on the left, only outer sheet metal. Complete height for a normal Citroen HY
Installed starting from 9/1963.
Tail sheet metal on the left. Mounting for the tail lamps. Suitable for Citroen HY. It is the
external sheet metal, with cross-beams. Length about 600mm.
Tail sheet metal on the left. Mounting for the tail lamps. Suitable for Citroen HY. It is only the
external sheet metal, without cross-beams. Length about 1000mm.
Tail sheet metal on the left. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal fits for the original AXO lights and has a projection for the license plate light.
Tail sheet metal on the left. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal fits for the original AXO lights!
Tail sheet metal on the left. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal is without hatches for tail lamps, but with projection for a license plate light.
Tail sheet metal on the left. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal is without lamp bores for tail lamps.
Tail sheet metal on the right down (without cross-beam on the rear side). Suitable for Citroen HY
to year of construction 07/1961. Or. No. HP823-3A
Tail sheet metal on the right, only outer sheet metal. Complete height for a normal Citroen HY
Installed starting from 9/1963.
Tail sheet metal on the right. Mounting for the tail lamps. Suitable for Citroen HY. It is the
external sheet metal, with cross-beams. Length about 600mm.
Tail sheet metal on the right. Mounting for the tail lamps. Suitable for Citroen HY. It is only the
external sheet metal, without cross-beams. Length about 1000mm.
Tail sheet metal on the right. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal fits for the original AXO lights!
Tail sheet metal on the right. Suitable for Citroen HY Pick UP, starting from year of construction
1963. The tail sheet metal is without lamp bores for tail lamps.
Floor, pre-assembled, enabling to extend the box body about 63 cm, for Citroen HY. Citroen never
produced long version HY. All extended HY vehicles have been modified by body shops.This complete floor ist the basis for an HY extention of 63 cm.
License plate fixture Citroen HY Pick UP. Also universal usable. E.G. Peugeot 203 Pick UP. For
license plate measurement: 200 x 330mm
Sliding door rail (horzontal). Suitable for Citroen HY. This rail is like the original, it can be
only mounted, if the roof is removed.
Sliding door rail repair sheet metal (horizontal). Suitable for Citroen HY. This rail do not
corresponds to the original, but it can be welded, without dismantling the roof. Length 1480mm.
Side panel long, from GRP (synthetic). Suitable for Citroen HY. Length: 1760mm. High: 470mm
Optically like a sheet metal, with cross-beams (axial), above and down. It can be used for on the left (HY821-84) or on the right (HY821-84A). Expansive shipping cost!
Front wall above the cab roof for raised box bodies, suitable for Citroen HY. If the HY body was
raised (by the companies Currus + Heuliez) this sheet metal was welded in the front. (Consisting of 2 sheets, 1x inside, 1x outside)
Bumper bows rear: Mounting reinforcing plate (at the rear crossbeam). Suitable for Citroen HY, to
year of construction 1963.
Corrugated sheet - side plate on the left completely (consisting of 2 sheet metals 149cm). Suitable
for Citroen HY with normal (short) wheel base. The sheet metals have an offset edge, so that they can be added together.
Side plate with flanges. Flanges length: about 1640mm. Sheet metal length: about 1850mm. Suitable
for Citroen HY. The sheet metal has centrically a pressed recess for the mounting of a reinforcement cross-beam. A dispatch is possible only by shipping company. In the case of delivery outside of the European Union, the sheet metal must be cut through by us!
Side plate on the right with flanges. Suitable for Citroen HY. Flanges length: about 1640mm. Sheet
metal length: about 1850mm. The sheet metal has a pressed recess (joggle) at an end, for the mounting (welding) of a further shet plate (long sheet metal for extended HY `s). The combination of our No. 48303 + 48304 results the long sheet metal for the left side. A dispatch is possible only by shipping company. In the case of delivery outside of the European Union, the sheet metal must be cut by us!
Side plate on the right, with flanges. Flanges length: about 1640mm. Sheet metal length: about
1850mm. Suitable for Citroen HY standard length, for on the right of side. The sheet metal does not have pressed recess for the mounting of a reinforcement cross-beam. A dispatch is possible only by shipping company. In the case of delivery outside of the European Union, the sheet metal must be cut by us!
Corrugated sheet metal - side sheet metal, for the rear extension. This plate gives an extension of
approx. 79 cm. The corrugations run out to the rear. The corrugations are cut at the front, so that it can be visually attached directly to the existing corrugations. Suitable for Citroen HY. Per piece.
45 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
