for Renault Heckmotor

Washer, M7

M7, washer largely, 7,5x22mm, 2mm heavily.

M7, washer largely, from high-grade steel, 7,5x21,5mm, 2mm heavily.

Washers corrugated M7x14 (French name: Striees). Content: 70 units. These grooved washers were

original Installed at French vehicles!

Washer corrugated M7x14 (French name: Striees). Content: 1 piece. These grooved washers were

original Installed at French vehicles!

Washer corrugated M7x18 (French name: Striees). Content: 45 units. These grooved washers were

e original Installed at French vehicles!

Washer corrugated M7x18 (French name: Striees). Content: 1 piece. These grooved washers were

original Installed at French vehicles!

Toothed washer M7 galvanized

M7x100, 8.8 / screw galvanizes.

• Suitable for this article
• 
  Toothed washer M7 galvanized
  0,25 €
• 
  Nut M7, galvanised, 12mm wrench size!
  0,64 €

Screw M7x12, e.g. to fix the steeringwheel 2cv, screw is galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Slotted counter-sunk screw M7x12.

M7x12. Countersunk screw 7mm, with flat bolt head! Material: High-grade steel. The bolt head has

about 12mm diameter! E.G. suitable for the door lock wedges (Citroen 11CV).

Screw Torx, M7x16. Content: 30 units.

Screw M7x16 galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M7x17, female hexagon screw M7x17mm.

Slotted counter-sunk screw M7x20.

Screw M7x20, galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M7x25 / screw high-grade steel, hexagonal 12mm. Flat bolt head

Screw M7x30, galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x35

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x40, galvanized, to fix the gearbox holder on front axle

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x45

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M7x50 / screw with shaft. E.g. fastening steering column to steering gear on Citroen 2CV (screw for

the steering tube clamp).

M7x50 / screw galvanised. Continuous thread.

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x80, e.g. to for lamp tree 2cv on chassis

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

M8, nut for 14mm wrenche. (Metal) (e.g. caliper Renault Caravelle, R8, Alpine110...).

Washers corrugated M8x18 (French name. Striees). Content: 45 units. These grooved washers were

original Installed at French vehicles!

Washers corrugated M8x22 (French name: Striees). Content: 25 units. These grooved washers were

original Installed at French vehicles!

M9 x 1,25 male thread cutter (die nut M9x1,25)

M9, M9x1.25 flange nut. This M9 nut is somewhat poorly manufactured, but works well. Our M9 nuts

12123 are better.

Toothed washer 9 mm. Or. No. Citroen 7903056125

Screw M9x20, gold chromate, FVP Bolts

Screw M9x30, FVP Bolts

• Suitable for this article
• 
  M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover
  1,14 €
• 
  Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

Screw M9x30, gold chromate, FVP Bolts

• Suitable for this article
• 
  M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover
  1,14 €
• 
  Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

Screw M9x35

Screw M9x50, gold chromate, FVP Bolts

Screw M9x65

• Suitable for this article
• 
  M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover
  1,14 €
• 
  Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

Magnetic lifter flexible + washing nozzles adjustment tool. This magnet lifter can be extended up

to 592mm and is flexible at the end. Also the nut in the intake tract far behind is brought out with it again! Additionally it has a steel needle in the handle, with which washing nozzles can be adjusted.

Magnetic bowl, stainless steel bowl with magnetic base and soft rubber shell. Very useful to

collect small parts! 150 mm diameter

Collar for the master brake cylinder (for 1 inch (25,4mm) master brake cylinder). Suitable for

Citroen 11CV to year of construction 07/1952. Citroen HY. Citroen 2CV. Peugeot P203. Renault Fregate etc. Dimension: 36 x 54mm.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These

universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.

Ground cable 530mm long, universal fitting.

• Suitable for this article
• 
  Battery pole switch. Just release knurled head bolt to stop current circuit.It
  9,13 €
• 
  Battery pole protecting cap from rubber. Color: black. Length: 52mm. Width
  6,45 €
• 
  Battery pole switch bent (space-saving). Just release knurled head bolt to stop
  9,82 €
• 
  Battery pole grease, 50g tube.
  4,91 €

Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 250mm. Cable

diameter: 22mm ². Made in the European Union. Universal fitting.

• Suitable for this article
• 
  Battery pole switch. Just release knurled head bolt to stop current circuit.It
  9,13 €
• 
  Battery pole switch bent (space-saving). Just release knurled head bolt to stop
  9,82 €
• 
  Battery pole grease, 50g tube.
  4,91 €

Earth cable (battery ground strap), with battery pole clamp and eye ring. Length: 285mm. Made one

in the European Union. Universal fitting.

Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 300mm. Cable

diameter: 22mm ². Made in the European Union. Universal fitting.

• Suitable for this article
• 
  Battery pole switch. Just release knurled head bolt to stop current circuit.It
  9,13 €
• 
  Battery pole switch bent (space-saving). Just release knurled head bolt to stop
  9,82 €
• 
  Battery pole grease, 50g tube.
  4,91 €

Ground cable (battery ground strap), with battery pole clamp ring tongue. Length: 350mm. Cable

diameter: 22mm ². Made in the European Union. Universal fitting.

• Suitable for this article
• 
  Battery pole switch. Just release knurled head bolt to stop current circuit.It
  9,13 €
• 
  Battery pole switch bent (space-saving). Just release knurled head bolt to stop
  9,82 €
• 
  Battery pole grease, 50g tube.
  4,91 €

Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 400mm. Cable

diameter: 22mm ². Made in the European Union. Universal fitting.

Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 500mm. Cable

diameter: 22mm ². Made in the European Union. Universal fitting.

• Suitable for this article
• 
  Battery pole switch. Just release knurled head bolt to stop current circuit.It
  9,13 €
• 
  Battery pole switch bent (space-saving). Just release knurled head bolt to stop
  9,82 €
• 
  Battery pole grease, 50g tube.
  4,91 €