for Renault Heckmotor

Pressure plate 160mm, in the exchange (plus 400 Euro Old part deposit). Suitable for various

Renault with rear engine (Dauphine, Floride, Caravelle, R8.). Distance of the centering bolts: 168mm (measured in the triangle). Distance of the fixing bolts: 50mm. Check disk inside diameter: 26mm. There are suitable clutch disks with 10 or 20 teeth. Or. No. 8547585 + 8547585 99

Ducellier, contact conversion kit to electronic ignition contact. This easy-to-install conversion

kit replaces the original contact with a "Hall sensor". The original distributor is retained (i.e. also the mechanical early ignition adjustment). Advantages: No wear on contacts, better control of the ignition coil. Attention: Better than contacts but not comparable with a fully electronic ignition system. Suitable for Ducellier distributor on Renault R4(1108cc), R5(845+956cc),R6(1108cc), R10(1108+1289cc), R12(1289cc), R15(1289+1565cc), R16(1565+1647cc). Peugeot 204(1120cc), 404(1618cc), 504 (1796+1971cc). Wherever the contact 34028(D304) + 82635 is installed, the conversion kit can be fitted quickly! Red cable = "+" Plus via ignition key - ignition current (terminal 15). Black cable = To ignition coil "-" negative (terminal 1). The condenser is omitted. It is no longer needed.

Ducellier, distributor arm, suitable for distributor cap 34034. Citroen DS + CX. Renault R4

Estafette, Renault rear engines. Peugeot 403, 404, 504, 304. Distributor number 2388 Ducellier. Original supplier! Length over everything: 47mm. Height over everything: 35mm. Inside diameter: 14mm.

Ducellier, distributor cap, small diameter, low overall height (distributor Ducellier 1392V)

Suitable for Renault R4 (R1123, 845cc, of year of construction 10/1962 to 09/1970, 26HP) + Renault R4 (R1123, 845cc, of year of construction 09/1971 to 10/1976, 34 HP). Renault 4CV, Dauphine, Floride, R5, Estafette. Gutbrod tractor (90.43.951). Inside diameter: 46mm. Suitable distribution arm: 82646 / 82088. Made in France.

Headlight mounting bolt (stud bolt with ball head 5mm). Thread: M5 x 0.8. Length: approx. 34 mm

The bolt is slotted at the end so that the headlight height can be adjusted with a screwdriver. Suitable for Citroen Dyane + Mehari. However, this bolt has also used in many French vehicles (Renault R4, Dauphine, Peugeot 203, 403, 404, etc.).

Recessed loudspeaker, very flat construction height (scope of delivery: 1 piece). Installation

depth only 30mm! Diameter 143mm. 40 Watt. 4 Ohm. Suitable for door panels of Citroen 2CV, Renault R4, Peugeot 204 - 504..... Particularly flat design, therefore super suitable for door panels (also Citroen 2CV + Renault R4). Outer diameter = 143 mm, cut-out for installation opening in the door panels = 120 - 130mm. Dualcone loudspeaker.

Rivet nut assortment made of aluminium. Consisting of: 40x M3, 35x M4, 25x M5, 25x M6, 15x M8, 10x

M10. Rivet nuts are ideal for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out). You will find the suitable riveting pliers under the number 21082.

Rivet nut pliers for M3, M4, M6, M8. With 2 lever arms (2 hand operation) for relatively easy

insertion of rivets with optimum force transmission. You will find a suitable range of aluminium rivet nuts under our number 21083. Rivet nuts are ideally suited for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out).

Universal electric attachment kit for tow bars. Includes relay for French cars. 12 volts. 7-pin

socket. Additional control light. Hella flasher relay connection: terminal + = positive supply/terminal 30, corresponds to the + sign on the 2CV relay. Terminal C = output of the indicator relay to the front and rear indicators, corresponds to terminal C on the 2CV indicator relay! Terminal R = connection of the control light. Terminal R2 = connection of an additional control light. Terminal - = ground, must be bolted to the vehicle! The 2CV indicator relay does not have this connection!

Electrical mounting kit universal, for tow trailer coupling. Inclusive Relay for French car. 6

6 Volt. 7 pole plug socket. Additional control light. Connection of the Hella flashing relay: Clamp 49 = plus supply, corresponds + to indications on 2CV the relay. 49a = outlet flashing relay clamps to indicator in front + rear, clamp corresponds to C on 2CV flashing relays! C2 = connection clamps additional control light. Clamp 31 = earth, must be screwed on to vehicle! This port do not have the 2CV flashing relay! The original control light, in the vehicle, you must parallel on the clamp 49a scolded! Electronic kit universal for trailer towing device, incl. relay for French cars, 7 pole plug socket