Search in Renault-rear-engined vehicle for r8

R8/R10, tie rod eye (tie rod securement). Suitable for Renault R8 + R10. Thread: M12x1. Made in

Italy

• Suitable for this article
• 
  Nut M12x1
  0,79 €

R8/R10, shock absorber rear (2 fittings). Suitable for Renault R8 Gordini + R10 Gordini. Length

compressed: 250mm. Length extended: 385mm.

R8/R10, door seal (by meters). Suitable for Renault R8 + R10. You need about 13 meters for all 4

doors.

R8/R10, windshield seal. Suitable for Renault R8 + R10, starting from year of construction 1962

Original suppliers by Renault. Made one in France!

R8/R10/A110, heating hoses (set) on the front of the heating casing. Suitable for Renault R8, R10 +

Alpine A110.

R8/R10/Alpine A110, brake caliper sealing set, rear. Brake system: Bendix. Suitable for Renault R8

R10. Alpine A110. For piston diameters: 32mm.

R8/R10/Alpine, shock absorber front (2 fittings). Suitable for Renault R8 Gordini + R10 Gordini

Alpine A110, starting from year of construction 1968. Matra Jet. Length compressed: 245mm. Length extended: 330mm.

R8/R10/Alpine110, ball and socket joint above, for Renault R8, R10. Alpine A110. Pin height to area

for screwing: 77mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 0996006600

R8/R10/Alpine110, ball and socket joint down, for Renault R8, R10. Alpine A110. Pin height to area

for screwing: 65mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 0996006500

R8/R10/Caravelle, intake funnel for radiator panels. Suitable for Renault R8, R10 and Caravelle.

R8/R10/Caravelle, engine gasket set. Suitable for Renault R8 (1108cc), of year of construction 1964

to 1965. R10 (1108cc), starting from year of construction 1965. Caravelle (R1132, R1133, R119D), of year of construction 1963 to 1965.

R8/R10/Caravelle, cylinder head gasket set. Suitable for Renault R8 (1108ccm), of year of

construction 1964 to 1965. R10 (1108cc), starting from year of construction 1965. Caravelle (1108cc, R1132, R1133), of year of construction 1963 to 1965.

R8/R10/Dauphine, gear knob with emblem. Thread M12x1.75 mm. With adapter for use with 10 mm + 12 mm

shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!

R8/R10/Dauphine, gear knob with Gordini emblem. Thread M12x1.75 mm. With adapter for use with 10 mm

12 mm shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!

R8/R10/Dauphine, gear knob with Renault emblem. Thread M12x1.75 mm. With adapter for use with 10 mm

12 mm shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!

R8G/A110, engine gasket set, without cylinder head gasket. Suitable for Renault R8 Gordini R1134 +

Alpine A110 1300VA (1255cc, R1135).

4CV-R8, gear linkage sleeve (on linkage). Suitable for Renault 4CV - R8. Inner diameter: 25 mm +

18-19 mm. Or. No. 6055955

4CV/Caravelle/R8/A110, brake hose front. Suitable for Renault 4CV, starting from year of

construction 03/1956. Renault R8, Alpine 110, Caravelle. Length: 330mm, 3/8-24, 3/8-24. Made in Spain.

4CV/Dauphine/R8, rubber stop front axle (new version) down. Suitable for Renault 4CV, Dauphine, R8

Or. No. 8300011

4CV/Dauphine/R8/Alpine 110, master brake cylinder. Brake system: Bendix (drum brake front). Piston

diameter: 22,2mm. Suitable for Renault 4CV, starting from year of construction 1955. Dauphine Ondine + Floride, with drum brake front. Made in Spain.

• Suitable for this article
• 
  R4/rear engine, brake fluid reservoir with locking cap. Suitable for many
  16,30 €

4CV/Dauphine/R8/R10, brake hose rear. Suitable for Renault 4CV, Dauphine, R8 + R10. Length: 230mm

Thread: 1x female thread 3/8 x 24UNf. 1x male thread 3/8 x 24UNF. Made in Spain.

A110/R8 Gordini, radiator made of aluminium. Suitable for Alpine A110 + Renault R8 Gordini

Delantero Dimension: 580 x 168 x 56mm. The radiator is handmade. The appearance is not identical to the original radiator! Aluminium radiators have a significantly higher cooling capacity than the standard radiator (which is why they are also used in motor sports!).

A110/R8 Gordini, radiator made of aluminium. Suitable for Alpine A110 + Renault R8 Gordini

Dimension: 290 x 428 x 56mm. The radiator is handmade. The appearance is not identical to the original radiator! Aluminium radiators have a significantly higher cooling capacity than the standard radiator (which is why they are also used in motor sports!).

Caravelle/Floride/R8, silencer, suitable for Renault Caravelle + Floride S (R1130 + R1131). Renault

R8. Installed starting from year of construction 1962.

• Suitable for this article
• 
  Tailpipe trim chromium-plates. 38mm inside diameter. Universal suitable
  22,71 €
• 
  Exhaust clip (58mm) for the elbow pipe. Suitable for Renault R4, 4CV, Dauphine
  3,87 €

Caravelle/Floride/R8/Dauphine, hand brake cable (double cable). Suitable for Renault Dauphine

Floride, R8, Caravelle. Length: 1900mm. Or. No. 8557975.

Caravelle/R8 wheel cover. Suitable for Renault Caravelle + R8. Diameter: 265mm.

• Suitable for this article
• 
  Caravelle/Floride, wheel cover screw. Suitable for Renault Caravelle + Floride.
  18,59 €

Caravelle/R8/10, fuel sender. Suitable for Renault Caravelle Coupe (don't fit in a Cabriolet)

Renault R8 + R10.

• Suitable for this article
• 
  Seal for fuel senders. Suitable for Renault Caravelle, Renault R8 + R10, 4CV
  2,24 €

Caravelle/R8/Alpine, valve cap from aluminum. Color: red. Suitable for Renault Caravelle, R8

Alpine A110.

• Suitable for this article
• 
  4CV/Dauphine/Floride, oil filler-cap red, for valve cap from aluminum. Color
  89,16 €
• 
  Alpine, oil filler-cap Alpine, for valve cap from aluminum. Color: red
  89,16 €
• 
  Caravelle/R8/Alpine, valve cap from aluminum: Suitable polished cap nut with
  13,78 €

Caravelle/R8/Alpine, valve cap from aluminum: Suitable polished cap nut with seal, for the valve

cap. Thread: M7x1

Caravelle/R8/R8S/R10, sport silencer "Devil" with 2 outlets. Suitable for Renault Caravelle, R8

R8S, R10.

Dauphine/Floride/R8/R10/A110, shock absorber rear (2 fittings). Suitable for Renault Dauphine +

Dauphine Gordini, of year of construction 1956 to 09/1960. Floride starting from year of construction 06/1964. Renault R8 + R10. Alpine A110, starting from year of construction 01/1966. Length compressed: 250mm. Length extended: 385mm.

Dauphine/R8, rubber stop (guide) for the bonnet. Suitable for Renault Dauphine + Renault R8.

Dauphine/R8/R10, shock absorber rear (2 fittings). Suitable for Renault Dauphine, apart from

Gordini, of year of construction 03/1956 to 03/1967. Renault R8 + R10 (all model`s), of year of construction 01/1967 to 10/1972. Min. lengthens: 240mm. Max. 360mm lengthens. Securement: M10

Dauphine/R8/R10/Caravelle, bush in the upper transmission suspension. Suitable for Renault

Dauphine, R8 + R10, Caravelle, Floride. Or. No. 8300009

Dauphine/R8/R10/Caravelle, transmission suspension on the left. Suitable for Renault Dauphine, R8 +

R10, Caravelle, Floride.

• Suitable for this article
• 
  Dauphine/R8/R10/Caravelle, transmission suspension on the right. Suitable for
  27,28 €

Dauphine/R8/R10/Caravelle, transmission suspension on the right. Suitable for Renault Dauphine, R8

R10, Caravelle, Floride.

• Suitable for this article
• 
  Dauphine/R8/R10/Caravelle, transmission suspension on the left. Suitable for
  27,28 €

Floride/Caravelle/R8, shock absorber rear (2 fittings). Suitable for Renault Floride + Caravelle

(only Cabrio + Coupe), of year of construction 1956 to 05/1964. Renault R8, of year of construction 1962 to 05/64. Length compressed: 285mm. Length extended: 405mm.

Floride/Caravelle/R8/R10, shock absorber front (2 fittings). Suitable for Renault Floride +

Caravelle (only Cabrio + Coupe), of year of construction 1956 to production end. Renault R8 + R10 front (all model`s, apart from Gordini), of year of construction 1962 to 1974. Length compressed: 290mm. Length extended: 335mm.

R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc

(34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Liners gasket bottom (12 pcs.. white = 0.06mm / grey = 0,07mm / red = 0,09mm)
  14,78 €

R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines

C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)

• Suitable for this article
• 
  Camshaft drive chain tensioner. For camshaft drive chain, with 58 links
  22,71 €

R4/R5/R8, cylinder head gasket. Engine: 688, 813 (1108cc). Suitable for Renault R4 1,1L, starting

from year of construction 1978. R5, R6, R8, R8 Malor, Floride S, Estafette (R2132).

• Suitable for this article
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 1 oversize

(+0,25). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 2 oversize

(+0,50). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard

dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm

diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm

diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm

diameter. 0,25 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm

diameter. 0,50 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm

diameter. Standard size. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits

Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....