Exhaust valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter
25,0mm. Overall height: 73,8mm. Valve stem: 7,0mm.
Search in Renault-rear-engined vehicle for dauphine
275 Articles | Page 4 of 6
Clutch release sleeve 2CV old, AMI6, old version (thrust ring running in ball bearings), for use of
a multi-disk! Also suitable for Renault R4, to year of construction 1970. Renault Dauphine, 4CV. Or.Nr.: AZ 314.01.
Clutch release sleeve 2CV alt/AMI6, old version (graphitic bearing), for use of the original clutch
with 3 levers. The graphitic ring has 49mm outside diameter, 32mm inside diameter. Totally overall height of 20mm. Also suitable for Renault R4 until 1970, Dauphine, 4CV. Or. No.: AZ 314.01 / Made of very high-quality special graphite with a density of 1.9g/cm3
Clamp at the chassis. Original Renault. This clip was nearly at all Renault R4, R16, R12, Dauphine
etc. installed. Or. No. 7701493039
Gasoline pump, 2x gasoline line connection. Suitable for Renault R4, 4CV, Alpine A110, Dauphine
R10, R12, R3, R5, R6, R8, Floride, Caravelle, Gutbrod 2500. Completely made of metal! Only Left hand drive (LHD)!
Gasoline pump. Suitable for Renault Dauphine + Gordini. Renault R4, early years of construction
Only left hand drive (LHD).
Gasoline pump (SEV) repair set. Diaphragm diameter: 102mm. Suitable for Citroen 11CV, 15CV. Citroen
HY, ID19. Renault Dauphine, 4CV, R4. Peugeot 203 + 403. Please observe the diameter! Made in Germany.
Gasoline pump cap seal, for mechanical SEV gasoline pumps. Dimension: 65 x 73 x 3mm. Partly
suitable for Citroen 11CV, 15CV. Citroen HY. Renault 4CV + Dauphine. Renault 203 + 403. Made in Germany.
Gasoline pumps repair set, only for SEV gasoline pumps. Diaphragm diameter: 75mm. Suitable for many
Renault (4CV, Dauphine, Floride, R4) + Peugeot (203,403,404). Citroen 11CV, HY, ID19.
Gasoline pump valve spring 9mm, for SEV gasoline pumps. Suitable for Citroen 11CV, 15CV. Citroen
HY, ID19. Renault Dauphine, 4CV, R4. Peugeot 203 + 403
Gasoline pump valve chamber seal, for mechanical SEV gasoline pumps. Partly suitable for Citroen
11CV, 15CV. Citroen HY. Renault 4CV + Dauphine. Renault 203 + 403. Made in Germany.
Brake shoes front (1 set). Brake system: Bendix. Suitable for Renault Dauphine, of year of
construction 1963 to 1967. Renault R4, first model`s. Drum diameter: 229mm. Lining-wide: 42mm. Original equipment quality. Made in Spain.
Brake fluid reservoir made of glass (jam jar!). These reservoirs were fitted to many Renault +
Peugeot cars. E.g. Renault R4, Dauphine, Floride, Estafette etc.. Original NOS old stock. The rubber connection at the bottom was renewed.
Brake fluid reservoir repair kit (for glass reservoir). This reservoir was used on a large number
of Renault cars. Consisting of: New cover with gasket, retainer for glass, connection at the bottom for the rubber). E.g. Renault R4, Dauphine, Floride, Estafette etc.. Original NOS old stock.
Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174
This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
Tail - Shutter. Suitable for Renault Dauphine. Quickly installed (the brackets are only inserted
into the upper and lower rear window rubber). A typical accessory from the sixties. Made in France
Water pump Renault Floride, Dauphine. New part. Or.Nr.9806440. Caution: The Floride + Dauphine has
an open cooling system. It is essential to check if the radiator cap is the right one ! The water pump can evacuate some cooling water through a small opening. New water pumps need approx. 500 km to 1000 km to get at 99,5 % leakproof. It is just normal to see some drops of water on the water pump!
Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following
Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.
Pressure plate 160mm, in the exchange (plus 400 Euro Old part deposit). Suitable for various
Renault with rear engine (Dauphine, Floride, Caravelle, R8.). Distance of the centering bolts: 168mm (measured in the triangle). Distance of the fixing bolts: 50mm. Check disk inside diameter: 26mm. There are suitable clutch disks with 10 or 20 teeth. Or. No. 8547585 + 8547585 99
Ducellier, distribution arm (small version). Suitable for Renault 4CV, Dauphine, Floride, R5
Estafette. Rotor length: 18,0mm. Rotor amount: 26mm. Shaft diameter: 14,0mm. Setting up depth: 15,0mm. Or. No. 08 54 720. Made in France.
PDF FILE 
Ducellier, distributor cap, small diameter, low overall height (distributor Ducellier 1392V)
Suitable for Renault R4 (R1123, 845cc, of year of construction 10/1962 to 09/1970, 26HP) + Renault R4 (R1123, 845cc, of year of construction 09/1971 to 10/1976, 34 HP). Renault 4CV, Dauphine, Floride, R5, Estafette. Gutbrod tractor (90.43.951). Inside diameter: 46mm. Suitable distribution arm: 82646 / 82088. Made in France.
Headlight mounting bolt (stud bolt with ball head 5mm). Thread: M5 x 0.8. Length: approx. 34 mm
The bolt is slotted at the end so that the headlight height can be adjusted with a screwdriver. Suitable for Citroen Dyane + Mehari. However, this bolt has also used in many French vehicles (Renault R4, Dauphine, Peugeot 203, 403, 404, etc.).
Inlet valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter
28,2mm. Overall height: 73mm. Valve stem: 7,0mm. Suitable valve spring cotter = 81064
Adjusting screw for the hand brake cable. Suitable for Renault Dauphine (only vehicles with disc
brake), R8, R10, Caravelle, Alpine A110. Or. No. 8704054
Grease cap for 160mm brake drum. Suitable for Renault R4, Caravelle, Floride, Dauphine and many
other Renault. Front axle and rear axle. Overall height: 27mm. Outside diameter: 42mm. Or. No. 0607035200
Hand brake handle lifting rubber, suitable for Renault R8, R10, Caravelle, Floride, Dauphine
Alpine 110. This rubber is mounted under the hand brake handle. Or.Nr. 5544990
Hand brake cable disc brake. Suitable for Renault Dauphine Gordini R1095, R8 1130 + Floride
starting from Ident. 421238. Caravelle R1133 starting from Ident. 29625. R10 R1190 + R1192 starting from Ident. 243215 (year of construction 1969 to 1972). Length totally: 1870mm. Sleeve: 820 + 810mm. Or. No. 8558509
Hand brake cable drum brake. Suitable for Renault Dauphine R1090, to year of construction 1963
Dauphine Gordini R1091, to year of construction 1963. Floride R1092, to year of construction 1963. Length totally: 1960mm. Sleeve: 2 x 700mm. Or. No. 8544992
Hand brake cable drum brake. Suitable for Renault Dauphine, Floride R1094 + R1095. R8 R1132 +
Floride R1131 to Ident. No. 372240. Caravelle to Ident. No. 205187. Length totally: 1900mm. Sleeve: 830 + 810mm. Or. No. 8551733
Flexible disk for the steering column. Suitable for Renault R4, R5, R8, R16, R18, Dauphine. Outside
diameter: 76mm. Inside diameter: 24mm. Pitch center diameter: about 50mm.
Rear engine, brake piston 32mm, for the brake caliper rear. Suitable for Renault R8, R10, Dauphine
Floride, Caravelle, A110.
Rear engine, brake piston 38mm, for the brake caliper front. Suitable for Renault R8, R10
Dauphine, Floride, Caravelle, A110
Rear engine, brake caliper sealing set, for 38mm piston! Note: The O-ring is 3,40mm wide. Suitable
for Renault R8+R10, Dauphine, Floride, Caravelle, alpine A110. Cross section of piston sealing ring is angular!
Rear engine, brake caliper sealing set. For piston diameters: 38mm! Suitable for Renault R8, R10
Dauphine, Floride, Caravelle, Alpine A110. The cross section of the piston sealing ring is round!
Rear engine, brake caliper at the rear left (new part). Brake system: Bendix. Piston diameter
32mm. Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine. Thread for brake hose: 3/8 x 24 UNF
Rear engine, brake caliper at the rear right (new part). Brake system: Bendix. Piston diameter
32mm. Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine. Thread for brake hose: 3/8 x 24 UNF
Rear engine, brake caliper front on the left. Brake system: Bendix. Piston diameter: 38mm. Suitable
for Renault R8, R10, A110, Floride, Caravelle, Dauphine.
Rear engine, brake caliper front on the right. Brake system: Bendix. Piston diameter: 38mm
Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine.
Interior light completely (black base). Suitable for Renault R4, R5, R6, Estafette, 4CV, Dauphine
alpine A110. Outside diameter: 57,6mm. Height completely: about 31mm.
275 Articles | Page 4 of 6
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
