Interior light completely (white base). Suitable for Renault R4, R5, R6, Estafette, 4CV, Dauphine
alpine A110. Outside diameter: 57,6mm. Height completely: about 31mm.
Search in Renault-rear-engined vehicle for dauphine
275 Articles | Page 5 of 6
V-belt 9,5x675. Suitable for Renault R4 (845cc) generator. R6 (845cc), Dauphine Gordini, R5TL, 4CV
Peugeot J7 + J9 petrol for the generator. Citroen CX. Length: 675mm
License plate handle rear, made of metal, anodizes. For license plate 205x343mm. Suitable for R4
Dauphine, Käfer etc. Outer dimension: 365 x 255mm. Made in Germany
Clip for the sill trim (aluminium), suitable for Citroen 2CV. The clip also fits the bumper
mouldings for the 2CV up to 1961, the wide side mouldings for the Citroen DS and the cardboard radiator cowling for the Renault Dauphine. This clip is not as extremely strong as our number 16844, but is particularly suitable for aluminium trims (easier to fit, as aluminium trims are extremely sensitive to pressure).
Clip for the sill trim (stainless steel), suitable for Citroen 2CV. The clip also fits for the trim
strips on the bumper for 2CV up to 1961. For the Citroen DS for the wide side trim strips and for the cardboard radiator cowling for the Renault Dauphine. This clip is extremely sturdy. It is particularly suitable for trim strips made of stainless steel. For aluminium trims, we recommend the softer clip 16831.
Control light blue, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Control light green, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Control light orange, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Control light red, version Jaeger. This very good reproduction of the Jeager light are partial
installed in: Renault 4CV, Dauphine, Floride, Caravelle, R4, R8, R10, R16, Alpine A110 and various Peugeot. Mounting hole: 10mm.
Clutch set Renault rear engine (Floride, Dauphine, Caravelle, A106, etc.). 10 teeth (the clutch
disk has torsion springs). 160mm diameter. Completely like original from new parts produced. An old part return is not necessary. Please observe the clutch adjustment in the service manual!
Generator Brush Set Paris Rhone. Suitable for Citroen DS. Renault Dauphine, Renault Fregate
Dimension: 18mm wide. 7mm heavily. 17mm high.
Engine gasket set completely, inclusive cylinder head gasket (one for nearly everything). Suitable
for Renault 4CV, 4L, Dauphine, Ondine, Floride. For Ventoux engines (3 crankshaft bearings) 662, 670, 690, 680, 839, 800, B1B. Engine capacity: 747cc, 782cc, 845cc.
Oil pressure switch. Thread: M14 x 1,5. Response pressure: 0,5 bar. Suitable for Renault R3 + R4
(747cc), from year of construction 1962 to 1967. Renault Dauphine + Floride. Citroen HY petrol.
Park light, suitable for Citroen 11CV, HY. Peugeot 203, 403. Renault Dauphine etc. Per piece
Color: Red white. Installation opening diameter: 17,5mm. This light can also universal Installed. E.G. Citroen 2CV. Or. No. 721119
Pedal rubber, for brake or - and clutch pedal. Old version. Suitable for Renault R4, R5, Dauphine
etc. Dimension: about 38 x 46mm.
R4/rear engine, master brake cylinder sealing set. For piston diameters: 3/4 inch. Suitable for
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, R8, R10.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 15/16 inch. Suitable for
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 19mm. Suitable for early
Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, Estafette.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 22mm. Suitable for early
Renault R4. Renault 4CV, Dauphine, Floride, Caravelle.
R4/rear engine, wheel brake cylinder front on the left. Suitable for Renault R4, sixties. Renault
4CV, Dauphine, Floride, R8. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 60mm. Made in Spain.
R4/rear engine, wheel brake cylinder front on the right. Suitable for Renault R4, sixties. Renault
4CV, Dauphine, Floride, R8. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 60mm. Made in Spain.
Wheel cover screw. Suitable for Renault R4, 4CV, Dauphine, Floride, Fregate. Thread: M12 x 1,75
Lenght: 22mm. Wrench: 19mm.
Wheel bearing rear axle. Suitable for Renault R8, R10, Alpine 110, Dauphine, Caravelle. The bearing
is mounted on the full-floating axle. Onto the full-floating axle the wheel plate is then pushed. Outside diameter: 68,0mm. Inside diameter: 25,0mm. Overall height: 19,0mm. Or. No. 0852914400. Made in Spain
Rear wheel bearing set (original equipment quality). Suitable for Renault R4. R5, R6, R8, Dauphine
e, R16 all models from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: 47x25x15 mm. Bearing 2: 42x20x15 mm. Or. No. 7701460642.
Wheel nut M10. Suitable for Renault 4CV + Dauphine with star rim (first models). These wheel nuts
were used until the beginning of the model year 1958 (up to chassis number 748117). Or. No. 8.240.153
Tire 145 R15 XZX (tl 78S). Manufacturer Michelin. Suitable for Citroen GS, GSA. Renault Dauphine
R8, R10, Floride. Summer tire
Tire R135/15 ZX. Manufacturer Michelin. Summer tire. Suitable for Citroen 2CV, AK, AMI, Mehari
Renault Caravelle, Renault 4CV, R8, R10, Dauphine Ondine
Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of
a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).
Headlight reflector (without glass). Headlight system "Cibie 160mm". Quality finishing. This can be
used to repair the original headlight. Simply loosen the glass cleanly (the old reflector can be damaged) and glue it to the new reflector. Suitable for Renault: 4CV, Dauphine, R4, Estafette, R8, R10.....
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Float in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm
float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
SEV, ignition contact (large sickle type). Version SEV S403. This contact fits nearly for all
French cars, from the fifties + sixties, which have a SEV distributor. E.G. for Citroen ID-DS (year of construction 7/1954 to 8/1967). Citroen 11CV + HY. Peugeot 403 + 404 (of year of construction 1960 to 1975). Renault Dauphine, Floride, Caravelle, R6, Estafette. Talbot all models, with SEV distributor. Made in France.
SEV, ignition contact SEV, short version. Suitable for Citroen DS, to year of construction 03/1972
Citroen 11CV + HY. Peugeot 404, starting from year of construction 1968. Renault R4, early years of construction. Renault Floride, Dauphine etc. Simca + Talbot, different models. Or. No. DS: DY211217A. Or. No. Peugeot: 592724 + 592726.
SEV, distribution arm SEV 466. Suitable for Citroen 11CV, starting from year of construction 1942
Citroen HY. Peugeot 202, Peugeot 203 starting from year of construction 1949. Peugeot 403, starting from year of construction 1955. Peugeot 404, starting from year of construction 1960. Renault R4, Fregate, Juva, Dauphine, Floride. Simca 8, Aronde, Ariane. Suitable distributor cap: 72182
PDF FILE 
SEV, distributor cap SEV 1626. Suitable for Citroën 11CV. Citroën DS up to year of construction
1967 (the ignition distributor is located at the rear of the engine). Renault R6TL, from year of construction 09/1970. R8 Major from 09/1964. Dauphine from 09/1962 to 1965. Caravelle from 05/1960 to 1964. Inner diameter: 63 mm. Overall height: 60 mm. Or. No. Citroën DY211-15
SEV, distributor cap SEV 453. Outside diameter: 58,7mm. Suitable for Citroen 11CV, starting from
year of construction 1942. Citroen HY. Peugeot 202, Peugeot 203 starting from year of construction 1949. Peugeot 403, starting from year of construction 1955. Peugeot 404, starting from year of construction 1960. Renault R4, Fregate, Juva, Dauphine, Floride. Simca 8, Aronde, Ariane. Suitable distribution arm: 72183
Safety belt automatic mechanism. An alternative for the original belts from Citroen DS (fits very
well). This belt can be also mounted in (as alternative, deviating from the original belt. Please note the dimensions): Peugeot 304, 203, 403, 404, 504 Pick UP. Renault Dauphine, Fregate, Floride + Caravelle to year of construction 1963, Renault R4 starting from year of construction 1978, R16. Belt length 297cm. Buckle connection 45cm. The belt has a "E" approvals! All the seat belts we offer are made in England. Strictly according to European car industry specifications, and of course have the required test marks. Your safety is close to our hearts. Therefore, we do not import cheap safety belts from Asia!
Door lining clip, suitable for Renault R4, R16, Estafette, Floride, Dauphine etc. Renault R4 has 12
2 in the front and 8 in the rear (40 in total).
275 Articles | Page 5 of 6
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
