front axle for Sonstige-Citroen 2CValt
48 Articles
Axle fixing bolt safety sheet. Suitable for Citroen 2CV. Per piece. The sheet metals are easily
bended at the end. So it`s easy to mount. Made in Germany.
Fixing bolt suitable for the axles, for Citroen 2CV, AK, DYane, ACDY, AMI. Length: 135 mm
Galvanized. Tensile strength 10.9. Fits for the front and rear axle! Note: The screws must absolutely have this high tensile strength. A lot of people offer a normal screw with 8.8 tensile strength.
Kingpin spacer disc set. Consisting of: 3x spacer disc (2.0 + 2.3 + 2.5mm), 1x metal top to hammer
in, 1x dust plate. Made in Europe
Kingpin oversize (17,08mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,08mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,041 > 17,07mm (with a reamer, according to ISO 286-2! Made by Franzose/CiPeRe
Kingpin oversize (17,12mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,12mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,081 > 17,11mm (with a reamer, according to ISO 286-2)! Made by Franzose/CiPeRe
Kingpins (original), complete with sleeves and washers (2.0 + 2.0mm). Per side. Suitable for all
years of construction! Original Citroen, not a reproduction.
Kingpin for Citroen 2CV, complete with all sleeves and washers (2,0 + 3,0 + 3,0mm). Steel version
Per side. Suitable for all years of construction! Excellent reproduction, our recommendation!
Kingpin for Citroen 2CV, with alloyed bushes. Complete with all sleeves and spacers (2,0 + 2,0 +
2,5mm). Per side. Suitable for all years of construction.
Kingpin reamer (hobby tool) (quick adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Adjustment
range: 17.0mm - 19.0mm. Receptacle: square. With this tool the swing arm and the bushings of the hub can be reamed to the exact size. This reamer is a "hobby tool". The quality should be sufficient for one-time use. We also have a professional tool under no. 12393 in our programme.
Kingpin reamer (fast adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Range of adjustment: 15,5mm
18,0mm (39/64 45/64 inch). Cutting material: HSS. Gumption length: 60mm. Mounting: Square. Professional tool. With this tools the radius arm and the hub can be reamed on the accurate measurement.
King Pin tool, manual pressing version . Suitable for 2CV, Dyane, Mehari, Ami. Made by Franzose. An
improved reconstruction of the genuine Citroen tool 1858-T resp. MR. 630-22/14. This tool has two different pressure pieces. So you are able to press out/press in the original and the rebuilt king pins, which had different diameters/guides of the full length inner hole. This tool is able to resist a torque of 200 Newton meter. If there is no movement of the king pin until 200 Nm, you have to dismantle the complete pivot arm and have to press out the king pin with a hydraulic press. For correct use of this tool please have a look into the original Citroen workshop manual.
Drive shaft crown nut, suitable for Citroen 2CV + Citroen GS. Reproduction. Tightening torque
e: 343-392Nm. Or. No.: A-416-8/5420543
Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating
wheel bearings, cardan joints etc.
Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing
grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).
Rubber stop for the front axle (small, round version), mounts laterally at the chassis. Suitable
for Citroen 2CV, AK, ACDY. Thread: M7 x 22. Diameter: 35mm. Height: 23mm.
Wheel plate (wheel hub) in front. Suitable for Citroen 2CV from + the fifties + sixties. 8 teeth
for the drive shaft mounting.
Friction shock absorber (complete with cap, rubber cap), at the front axle. Suitable for Citroen
2CV starting from year of construction 1955. Reproduction.
Friction shock absorber sheet metal plate (the lower, to the radius arm indicating). Suitable for
Citroen 2CV. Or.Nr.: AM43682
Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings are identically
constructed over the total construction period (also for Dyane, AK, AMI, Mehari). They fit for the front axle and for the rear axle. Dimensions: 63.5 x 95 x 17 mm. Or. No. ZC 9620041U
Radius arm bearing set, suitable for Citroen 2CV, Dyane, Ami. Consisting of: 4x radius arm bearing
4x shaft seal radius arm bearing, 2x split pin for radius arm nut.
Radius arm bearing locknut, suitable for Citroen 2CV, Dyane, AK, Mehari, AMI. Measurement: 63 x
150mm. Or. No. AZ414-90
48 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
