steering gear for Sonstige-Citroen 2CValt

Spring for gear racks thrust piece (in the steering gear). Suitable for Citroen 2CV. Or.Nr.A4422

Steering gear repair set for the tie rod guide. Suitable for Citroen 2CV. Consisting of: Pin + seat

bowls + guides, ball pin, rubber,

• Suitable for this article
• 
  Front axle cover sheet. (Cover at the steering gear, below the tie rod
  12,79 €
• 
  Front axle sliding sheet metal at the steering unit. Suitable for Citroen 2CV
  7,89 €
• 
  Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the
  1,55 €

Steering worm of 7 teeth, inclusive bearing, for Citroen 2CV. Splines (worm gears) are continuous

up to the bearing. Suitable bush = 12233.

Steering worm of 7 teeth, inclusive bearing, for Citroen 2CV. First version. Splines (worm gears)

go only up to the half height of the bearing. Shaft diameter at the lower end = 13 mm.

Steering worm distance disk. Suitable for Citroen 2CV. Measurement: 23.5 x 34 x 0,95mm. Or.Nr

A442-72

Steering worm bearing bush (down at the needle bearing). Suitable for Citroen 2CV. The bearing is a

needle bearing! Only for steering worms with 8 teeth. Inside diameter: 12mm. Outside diameter: 18mm. Overall height: 12mm. Manufacturer SKF.

Steering worm bearing bush 2CV, down at the steering worm. (Needle bearings), manufacturer SKF

Inside diameter 10mm, outside diameter 17mm, height of 12mm

Steering worm locking cap down (the cap is hit from downside into the steering gear). 20mm

Suitable for Citroen 2CV.

Steering worm nut with sealing ring. Suitable for Citroen 2CV starting from year of construction

03/1971.

Steering worm nut with sealing ring. Suitable for Citroen 2CV, starting from year of construction

03/1971. From own production, with interchangeable shaft seal. Very significant.

Steering worm nut shaft seal (as substitute for 12140). Suitable for Citroen 2CV, starting from

year of construction 03/1971. Dimension: 19 x 27 x 5mm.

Steering unit, repair set. Suitable for Citroen 2CV. Consisting of: Guide steering unit pin, 2x

slide ring, ring for the gear rack ((27,75mm + - 1/10mm), rubber under the tie rods. Reproduction. Only for LHD, cannot use for RHD.

• Suitable for this article
• 
  Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the
  1,55 €
• 
  Screw M7x12, e.g. to fix the steeringwheel 2cv, screw is galvanized
  0,51 €

Tie rods slide ring squarely (1 oversize), mounts in the steering gear. Suitable for Citroen 2CV

Reproduction from a brass alloy. Oversize: about 8 x 13 x 21mm.

• Suitable for this article
• 
  Tie rods rubber, at the front axle. Suitable for Citroen 2CV4 + 2CV6.
  2,77 €
• 
  Tie rods ball pin, in the steering gear. Suitable for Citroen 2CV. Or.Nr
  8,83 €

Tie rods slide ring squarely, mounts in the steering gear. Suitable for Citroen 2CV. Reproduction

from a brass alloy. Standard measurement about 8x13x20.

• Suitable for this article
• 
  Tie rods rubber, at the front axle. Suitable for Citroen 2CV4 + 2CV6.
  2,77 €
• 
  Tie rods ball pin, in the steering gear. Suitable for Citroen 2CV. Or.Nr
  8,83 €

Tie rods rubber, at the front axle. Suitable for Citroen 2CV4 + 2CV6.

Tie rods ball pin, in the steering gear. Suitable for Citroen 2CV. Or.Nr.: AM4428. The surface is

hardened!

• Suitable for this article
• 
  Tie rods rubber, at the front axle. Suitable for Citroen 2CV4 + 2CV6.
  2,77 €
• 
  Tie rod nut, self locking. For the securement at the steering gear. Suitable
  0,58 €
• 
  Tie rods slide ring squarely, mounts in the steering gear. Suitable for Citroen
  3,87 €
• 
  Tie rods slide ring squarely (1 oversize), mounts in the steering gear
  7,83 €

Tie rod nut, self locking. For the securement at the steering gear. Suitable for all Citroen 2CV

Dyane, Ami.

Front axle sliding sheet metal, safety sheet. (Sliding sheet metal on the steering unit). Suitable

for Citroen 2CV. Or.Nr.A44295

• Suitable for this article
• 
  Screw M7x12, e.g. to fix the steeringwheel 2cv, screw is galvanized
  0,51 €

Gear rack thrust piece (in the steering gear). Suitable for Citroen 2CV.

Gear rack ring in the axle tube (steering gear). Suitable for Citroen 2CV. Reproduction. First

oversize. Outside diameter: about 34,2mm. Inside diameter: 27,5mm.

• Suitable for this article
• 
  Gear rack ring, rivets for the securement of the guide ring. Suitable for
  1,17 €

Gear rack ring in the axle tube (steering gear). Suitable for Citroen 2CV. Reproduction. Standard

dimension. Outside diameter: about 34,00mm. Inside diameter: 27,50mm.

• Suitable for this article
• 
  Gear rack ring, rivets for the securement of the guide ring. Suitable for
  1,17 €

Gear rack ring in the axle tube (steering gear). Suitable for Citroen 2CV. Reproduction. Second

oversize. Outside diameter: about 34,3mm. Inside diameter: about 27,5mm.

• Suitable for this article
• 
  Gear rack ring, rivets for the securement of the guide ring. Suitable for
  1,17 €

Gear rack ring, rivets for the securement of the guide ring. Suitable for Citroen 2CV, all years of

construction.

Gear rack steering unit, 19 teeth. Suitable for Citroen 2CV, starting from year of construction

1955. This gear rack is only Installed by vehicles, which have an steering worm with 7 teeth. Or. No.: A4424b

Steering rack, up to Orga no. 2276. Suitable for Citroen 2CV (steering pinion with 7 teeth). 24

teeth, total length: 365mm. Replica

• Suitable for this article
• 
  Gear rack ring, rivets for the securement of the guide ring. Suitable for
  1,17 €