carburetor and carburetor gasket sets for Alle Alle
All fuel-controlling spare parts from us, are not applicable for fuel with an ethanol content of more than 5%. The warranty is not valid if high ethanol content such as E10 or greater is being used. Damages like swelling, dissolving or decay are a sign of using too much ethanol. Unfortunately, the developers of modern fuel are considering the impact on our cherished properties ever less.
348 Articles | Page 1 of 7
Cover plate fur the accelerator box for the Choke, for oval carburetor 2CV6 (If the pump is missing
or is defective.) Made in Germany.
Turn off valve Diesel (fuel injection system). Suitable for Citroen CX Diesel + TD. Citroen AX
Diesel, Visa Diesel, XM 2.1 TD. Citroen C25 CD. Peugeot 205D, 305D, 505D, 604D, J5, J7D. Renault R5 CD, R20D, R25D.
Adapter ring from aluminum, in order to mount the original air filter on a new carburetor Solex 34
(Zenith to Solex). Suitable for Citroen 11CV with D engine.
Pin, for the connection throttle control cable to the oval carburetor. Suitable for Citroen 2CV6
Length: 18,0mm. Diameter: 4,93mm. Or. No. AM142-67
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
Pressure spring suitable for the idle air control adjusting screw, for Solex carburetor. For the
following carburetors: 26CBI, 28CBI, 30CBI (AMI6), 26/35PICS, 32PCIS, 34PCIS+PCIS, 34PICS-6
CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to
adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
PDF FILE CX GTI, rubber for the air intake (intake manifold). Suitable for Citroen CX 25 IE (GTI). Diameter
65 + 70mm. Or. No. 95596787. New part.
CX, inlet manifold connection hose. Suitable for Citroen CX GTI + CX GTI Turbo. High-quality
reproduction made from oil-resistant silicone. Inner diameter: 47mm. Length: 51mm. Or. No. 95590913
CX, radiator hose under the carburetor (preheating hose). Suitable for Citroen CX20, CX22, CX
Athena, all after year of construction 1983. Or. No. 75509594
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,0mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,5mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 2,0mm. The
different thicknesses of the seal are required, to adjust the fuel level of the float chamber.
Throttle valve spring for the throttle valve shaft. Suitable for 2CV6 starting from year of
construction 1981. (oval carburetor). The spring is mounted at the exterior of the carburetor.
Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges, you can determine the
diameter of carburettor nozzles. Indispensable for work on the carburettor (e.g. changing the nozzle to original values, calibrating the carburettor, etc.).
Injection pressure regulator, suitable for Citroen DS IE. Very good reproduction "Made in Germany
This controller corresponds to the Bosch number 0280 160 007 / 0 280 160 003 / 0 280 160 004. Citroen Or. No. 1D 5412357T
Fuel injection system, temperature sensor at the cylinder head (coolant sensor). Suitable for
Citroen DS IE. Replacement product from Hella. The plug must be converted!
Injection nozzle, suitable for Renault Apine A310 1600VF. Very good reproduction from Europe. Or
No. 7700545784 Bosch No. 0280150016
Fuel injection nozzle rubber above (large rubber), suitable for Citroen DS21IE + DS23IE. Dimension
21.8 x 32.2 x 7,6mm. Or.Nr.: 5412354K
Fuel injection nozzle rubber down (small rubber), suitable for Citroen DS21 IE + DS23 IE
Dimension: 7.4 x 14.6 x 4,5mm. Or. No. DX144101A
Spring for the Choke flap in the carburetor. (oval carburetor). Dimension: 0,5 x 4,5 x 20mm
Suitable for Citroen 2CV6.
Throttle control cable spring (at the carburetor). Suitable for Peugeot 204, 403, 404, 504 (4 + 6
liners), 505. Or. No. 1654.34
Rubber seal between carburetor + air filter, 38mm connection. Suitable for Citroen 2CV with round
carburetor and many other classical French vehicles.
Rubber seal between carburetor + air filter. Suitable for Citroen 2CV6 with round carburetor
Connection port 50-55mm. You can use it for other french car's.
Rubber ring (seal) between air filter and carburetor. Suitable for Citroen DS, old version
Dimension: 65 x 71 x 90 x 20mm. Or. No. DS142-106
Rubber hose for 2CV6, between carburetor + air filter (oval carburetor). By tears in the rubber
hose, the engine can pull wrong air!
Rubber hose for 2CV6, between carburetor + air filter (oval carburetor). Very , very good
reproduction of original manufacturer. The hose is made of the same material and not so wobbly as the reproduction hoses.
Rubber hose between carburetor + air filter, suitable for Citroen 2CV, AZAM, AMI6. Of round
carburetor on grey sheet metal air filter.
348 Articles | Page 1 of 7
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
