404/504/505 allen screw for the clutch securement. Suitable for Peugeot 404, 504 + 505. Thread: M7
Length: 17mm. Or. No. 6913.22
clutch for Alle Alle
243 Articles | Page 1 of 5
4CV, clutch release sleeve clutch, with graphitic coil. Suitable for Renault 4CV. Outside diameter
graphitic coil: 47mm. Inside diameter graphitic coil: 26,5mm. The bearing is a strengthened reproduction.
Clutch release lever spring. (Clutch). Reproduction. Suitable for CITROEN 2CV6, starting from year
of construction 1981. Or.Nr.: AM314-9.
Clutch release yoke for the clutch. Old version (first 602cc version), suitable for Citroen 2CV
Dyane, AMI. Or.Nr.: AM314.4
Release fork for the clutch. Suitable for Citroen 2CV6, AK, Dyane, last version, from year of
construction 03/1982. The last improved version of the release fork is reinforced compared to the previous version. Of course, our release forks are made of high-quality steel.
Clutch release sleeve (reproduction). Suitable for Renault R4, R5, R6, R8, R12, R18, Talbot 1510
Horizon, Solara. Inside diameter: 23,5mm. Outside diameter: 56mm
Clutch release sleeve 2CV old, AMI6, old version (thrust ring running in ball bearings), for use of
a multi-disk! Also suitable for Renault R4, to year of construction 1970. Renault Dauphine, 4CV. Or.Nr.: AZ 314.01.
Clutch release sleeve 2CV alt/AMI6, old version (graphitic bearing), for use of the original clutch
with 3 levers. The graphitic ring has 49mm outside diameter, 32mm inside diameter. Totally overall height of 20mm. Also suitable for Renault R4 until 1970, Dauphine, 4CV. Or. No.: AZ 314.01 / Made of very high-quality special graphite with a density of 1.9g/cm3
Clutch release sleeve, suitable for Renault V6, Alpine A310 + R30V6. Inside diameter: 32mm. This
clutch release sleeve fits only at vehicles, which have a clutch disk with 10 teeth!
Release ring clutch, for all Citroen 2CV + AMi + Dyane, which have the clutch release yoke above in
the transmission bell housing. (2CV with 9, 12 + 16 HP) of Or.Nr.: A31414
Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174
This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....
Bush in the fly wheel. Suitable for Peugeot 204, 304, 404, 504. Inside diameter: 12mm. Outside
diameter: 15mm. Height: 15mm.
Pressure plate 160mm, in the exchange (plus 400 Euro Old part deposit). Suitable for various
Renault with rear engine (Dauphine, Floride, Caravelle, R8.). Distance of the centering bolts: 168mm (measured in the triangle). Distance of the fixing bolts: 50mm. Check disk inside diameter: 26mm. There are suitable clutch disks with 10 or 20 teeth. Or. No. 8547585 + 8547585 99
Pressure plate 228mm, stronger version. Manufacturer: Sachs! Suitable for Citroen CX 1 + CX 2. C25
D. Peugeot 505,2.2/2.8 GTI/2,5TD. Peugeot 604,3.0 + 2,5TD. Peugeot J5 2,5D.
Spring for brake pedal + clutch pedal. Suitable for Citroen HY, Installed starting from year of
construction 12/1969. Diameter: about 20mm. Length: about 155mm. 41 turns. Or. No. HY435-25. Note: With Citroen HY, from year of construction 12/1967 to 12/1969, is installed 1x spring article no. 48240 (ZC9089071u clutch) + 1x article no. 48292 (HY435-25 brake).
Spring for brake pedal + clutch pedal. Suitable for Citroen HY, Installed up to year of
construction 12/1967. Diameter: about 12mm. Length: about 220mm. 31 turns. Or.Nr. ZC9089071U. Note: With Citroen HY, from year of construction 12/1967 to 12/1969 is 1x the spring article no. 48293 (ZC9089071u clutch) + 1x article no. 48292 (HY435-25 brake) Installed.
Spring largely, for clutch release sleeve. Suitable for DS, starting from year of construction
07/1972. Or. No. 5411216R
Spring largely, for clutch release sleeve. Suitable for Citroen DS, to year of construction
07/1972. Or. No. 2D5411216R
Clutch release sleeve, spring for the clutch release sleeve. Suitable for Citroen DS, of year of
construction 1968 to 1969. (3 finger, lever clutch). Or. No. D31477
Spring, for the clutch release fork lever. Suitable for Citroen DS, of year of construction 1970 to
1971. 25 turns. Diameter: 19,0mm. Overall length: 67mm. Or. No. 1D5417790X
Centrifugal clutch bearing for 2CV6+4, measurement: 17x40x12mm, Inside diameter: 17mm, outside
diameter: 40mm, overall height: 12mm. Or.Nr.: ZC9620103
Centrifugal clutch, nut for the bearing. Reproduction. Suitable for Citroen 2CV. Measurement
16x150mm. Or.Nr. A332 5, AZL6
Centrifugal clutch ring with friction linings. Lining-wide 26mm. Suitable for Citroen 2CV6 with
centrifugal clutch. Or.Nr.: AM312-7, AZL6
Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV
with being pedals. Piston diameter: 22mm. Brake line connector: 1x M12x1 + 1x M10x1mm. Connection brake fluid reservoir: M16. Very rare export version! This master brake cylinder was used also as clutch master cylinder at 2CV Sahara!
Hydraulic pipe (bank of tubes) above on the centrifugal governor. Suitable for Citroen DS IE
starting from year of construction 06/1971. Or. No. DXN394-360A + 5D 5404190W
Hydraulic pipe (bank of tubes) between clutch cylinder and hydraulic cluth adjustment. Suitable for
Citroen DS, with carburetor engine. Or. No. DXN394-312A
243 Articles | Page 1 of 5
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
