front brake without hydraulic parts for Alle Alle
131 Articles | Page 1 of 3
Brake grinding pads, suitable for Citroen DS, starting from year of construction 1965. Citroen SM
all years of construction. The brake grinding blocks straighten the brake disks. The sanding blocks were former times standard equipment of each Citroen workshop! Or. No. 1D5451478S
Brake shoes mounting set (front). Brake system: Bendix. Suitable for Renault R4, R5. For drum
diameters: 200mm. Lining-wide: 36mm.
Brake shoes mounting set (front). Brake system: Bendix. Suitable for Renault R4. For drum
diameters: 228mm. Lining-wide: 42mm.
Brake shoes mounting set in front, suitable for Citroen 2CV (small drum in front, 200mm diameter)
Scope of delivery: 4x locking pin with spring + plate, 2x tension spring for the brake shoes.
Brake shoes mounting set in front, suitable for Citroen AK400, ACDY, Mehari, AMI6 (large drum in
front, 220mm diameter). Scope of delivery: 4x locking pin with spring + plates.
Brake shoes mounting set. Brake system: Bendix. Suitable for Renault R4, R5. For drum diameters
229mm. Lining-wide: 42mm.
Brake shoes Peugeot 203 for front + rear. Peugeot 403 + 404 rear only. For brake drum diameter 255
mm. Brake lining width: 35 mm. Or. No. 4238.62. These brake shoes replace the old Peugeot numbers: 4238.61 + 4239.11 + 4240.16 + 4235.16 + 4245.17.
Brake shoes set in front (new parts). Suitable for Citroen HY, to year of construction 02/1962
Wide one: 45mm. Note: New parts, an old part return is not necessary! Made one in European Union. Or. No. HY451-018
Brake shoes set in front (new parts). Suitable for Citroen HY, starting from year of construction
02/1962. Width: 55mm. Note: New parts, an old part return is not necessary! Made in European Union. Or. No. HY451-018A
Brake shoes front (1 set). Brake system: Bendix. Suitable for Renault Dauphine, of year of
construction 1963 to 1967. Renault R4, first model`s. Drum diameter: 229mm. Lining-wide: 42mm. Original equipment quality. Made in Spain.
Brake shoe set front. Brake system: Bendix. Suitable for Renault R4 (R1120), of chassis number
2279354 to 21591152. Drum diameter: 200mm. Lining-wide: 35mm. Original equipment quality.
Brake shoes front (1 set). Brake system: Bendix. Suitable for Renault R4, of chassis number 2279354
to 21591152. Drum diameter: 200mm. Lining-wide: 36mm. Reproduction
Brake shoe set in front (brake set, with 2x wheel brake cylinder + brake shoes). Brake system
Bendix. Suitable for Renault R4, to year of construction 08/1986. Renault R5, to year of construction 12/1982. Renault R6, starting from year of construction 04/1972. Piston diameter: 23,8mm. Drum diameter: 228mm. Lining-wide: 40mm. Original Renault, no reproduction! Or. No. 7701205061
Brake shoes front (brake set, with 2x wheel brake cylinder + brake shoes). Brake system: Bendix
Suitable for Renault R4 + R5. Piston diameter: 23,8mm. Drum diameter: 228mm. Lining-wide: 42mm. Manufacturer Valeo. Made in Europe.
Brake shoes in front. Suitable for Citroen 2CV, of year of construction 06/1952 to 1982. (Vehicles
with drum brake at the front axle). Lining-wide about 35mm. 200mm diameter.
Brake shoe linings in front, to rivet. Suitable for Citroen 11CV, with 12 inch drum (304,8mm). (1
set = suitable for 1 axle). Or. No. 438016
Locking pin brake shoe (pin by the anchor plate), suitable for rear (all 2CV) + in front (2CV with
drum brake in front). Also suitable for Citroen DS (drum brake rear). 39mm overall length. Or. No. A451-83
Brake shoe set in front, with wheel brake cylinders (piston 28,57mm). Suitable for Citroen 2CV4 +
2CV6, starting from year of construction 03/1970. Dyane 4. Brake system: DOT. Brand quality, no reproduction. Brake line connector: 8,0mm. For drum diameter: 200mm. Lining-wide: 36mm. Or. No. 95618228
Brake shoe set, in front + rear befitting. Suitable for Renault 4CV, 2e series starting from year
of construction 1950. Drum diameter: 180mm. Lining-wide: 32mm.
Brake eccentric repair kit. Suitable for Peugeot 203, 403 + 404. This spare part was not available
as an original part. However, as the square drive on the original eccentric is often worn, this is a repair option. To do this, the original eccentric must be drilled off the brake anchor plate. The new repair kit can then be fitted.
Brake system repair set front, for Citroen 2CV6, consisting in only new spareparts. This set
enables to renew the complete front brake system: 2X new brake calipers, 1X brand brake discs, brand brake pads + hand brake pads and 1 liter LHM. 3x brake pipe seal.
Axle on the anchor plate, for the mounting from the lower eccentrics of the brake liners. Suitable
for Citroen 2CV. Or.Nr.: AZ 451 202A
Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is
supplied (without axle). Made in Germany.
Brake centring: brake shoe centring cam axle spacer ring (installed between centring cam and anchor
plate, 10mm thick). Suitable for all Citroen 2CV rear + Citroen DS rear.
Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam
axle and anchor plate). Dimension: 9.5 x 27mm.
Brake liner centering tool in front, for the drum brake. Suitable for Citroen 2CV, to year of
construction 1981. AMI, Dyane, Mehari.
Centering cam for the brake shoe in front. Suitable for Citroen 2CV, to year of construction 1981
Diameter cam: 16mm. Bore: 10mm. Tool mounting: 21mm. Per piece.
Handbrake brake pads, brand manufacturer. Suitable for Citroën 2CV with disc brakes, also for
Citroën GS 1.0. Due to manufacturing variations on the part of Citroën (in Portugal), it may be necessary to grind the brake pads down slightly.
Parking brake pads, reproduction, suitable for Citroen 2CV + Citroen GS 1,0. At the 2CV installed
of year of construction 1981 to 1990.
Brake pads front (1 set). Brake system: Bendix. Suitable for Renault R4, R5, R16, R15, Alpine A310
R12, Alpine 1600S. Wide one: 108,9mm. Amount: 49mm. Heavy one: 14,0mm. Reproduction
Brake pads front (1 set). Brake system: Bendix. Suitable for Renault R8, R10, Alpine 110. Wide one
95mm. Amount: 40,5mm. Heavy one: 10,2mm. The corners lower at the brake pad are round. 2x guide at the rear side.
Brake pads front (1 set). Brake system: Lucas Girling. Suitable for Renault R5 Alpine + Alpine
Turbo. Renault R12, R18. Wide one: 99,5mm. Amount: 64,1mm. Heavy one: 16mm.
Front brake pads, suitable for Citroën 2CV6, Dyane6, AMI8, Mehari. Reproduction! Fitted to 2CVs
from the year 1981 > 1990.
Front brake pads, suitable for Citroën 2CV6, Dyane6, AMI8, Mehari. Original manufacturer quality
Fitted to 2CVs from the year 1981 > 1990.
Brake pads in front, suitable for Citroen DS, starting from year of construction 1965. Citroen SM
all years of construction. High quality. Fits very good in the brake calipers. The brake pads have like original, cooling radiators on the rear side! Or. No. DX451-32A. Made in Europe! The manufacturer in Italy has stopped the production of these branded brake pads.
Brake pads in front, suitable for Citroen Dyane + ACDY. These brake pads have a connection for wear
control. Reproduction. Made in Europe.
Brake pads in front, Renault R16, to year of construction 09/1968. System Bendix. Wide one: 95mm
Amount: 40,5mm: Heavy: 12mm. Or. No. 7701348999. Made in Europe.
Brake pads front. Brake system: Lucas - Girling. Suitable for Renault R4, R5. Wide one: 93,4mm
Amount: 56,3. Heavy one: 15,8mm. Original equipment quality.
Brake pads front. Brake system: Lucas Girling. Suitable for Renault R4, starting from year of
construction 07/1986. Renault R5. Wide one: 93,4mm. Amount: 56,3mm. Heavy one: 15,8mm. Reproduction
Front brake pads. Suitable for Citroen GS (2 series), from year of construction 1973. Width
77.1mm. Height: 82.2mm, thickness 16mm. With wear indicator
Brake caliper securement rubber (Diabolo rubber). Suitable for Citroen DS (brake caliper hanging up
rubber). Or. No. DVN451020
131 Articles | Page 1 of 3
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
