intake and exhaust manifold for Alle Alle
134 Articles | Page 1 of 3
Exhaust elbow, with securement for an heat protection shield. 4 in 1 manifold. Suitable for Citroen
DS, of year of construction 1966 to 1971. Or. No. DV181-81
Exhaust elbow, without securement for a heat protection shield. 4 in 1 manifold. Suitable for
Citroen DS, of year of construction 1962 to 1965. Or. No. DS1811
Exhaust elbow heat protection plate, with isolation (securement with 8 rivets). Suitable for
Citroen DS IE. Or. No. DX181-213A
Exhaust manifold heat shield (shielding plate). Only suitable for Citroen DS, built between 1962
and 1963. Original no. D181-6C. Very elaborate small-batch reproduction, handmade.
Exhaust elbow heat protection shield down and/or inside. Suitable for Citroen DS, with carburetor
engine. Or. No. D5414425W
Exhaust elbow heat protection shield, inside. Suitable for Citroen DS carburetor + injection
engines. Completely small adaptation work is possible. Only this heat protection shield is supplyable. Or. No. DX17114
Exhaust elbow heat protection shield, with outlet for preheating. Suitable for Citroen DS, starting
from year of construction 1972. Or. No. DX18114
Exhaust elbow heat protection shield, without outlet for preheating. Suitable for Citroen DS, to
year of construction 1972. Or. No. DS18114
Exhaust elbow, new part, with all seals. Suitable for Citroen 11CV, starting from year of
construction 10/1941. Or. No.456174
Exhaust, elbow tubing sealing ring. Suitable for Peugeot 204, of year of construction 1967 to 1975
(engine XK + XK4). Peugeot 304, of year of construction 1969 to 1975 (engine: XL3, XL3S, XL5). For 204 + 304 the seal 1x is required. Peugeot 504 V6 (Cabrio + Coupe) + 604 V6. For 504 and 604 the seal 2x is required. Dimension: 41.5 x 55mm. Or. No. 1710.11
Exhaust clip (elbow clip) fixing bolt M7. Flattened head. Overall length: 56mm. Suitable for
Citroen DS. Or. No. 1D5412151D
Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to the
flame tube. Suitable for Citroen DS + Citroen HY. Or. No. 5412150T
CX, inlet manifold connection hose. Suitable for Citroen CX GTI + CX GTI Turbo. High-quality
reproduction made from oil-resistant silicone. Inner diameter: 47mm. Length: 51mm. Or. No. 95590913
Seal intake manifold (per piece). Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 +
R17. Fuego (1,6L). Or. No. 0857720900
Seal intake manifold (per piece). Suitable for Renault R16 1,6/TS/TX. Renault R15 + R17 (1.6 L
engine). Fuego (1,6L). Or. No. 0857720800
Seal intake manifold. Suitable for Renault R5 1.4 + 1.4 turbo. Renault R5 Alpine 1.4 turbo. Inside
diameter: 30,0mm. Or. No. 7701036764.
Seal exhaust elbow. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego
(1,6). Or. No. 7700501840
Seal Y-pipe. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego (1,6L)
Peugeot 505,2.0 TI/STI + 2.2 GTI. Or. No. 7700657683 + 7701036761
Seal between inlet + exhaust elbow + cylinder head. Suitable for Citroen 11CV + Citroen HY to year
of construction 1963. 186mm long. Or. Nr.452996
DS starting from 65, elbow pipe (flame tube), produced from high-grade steel! Suitable for Citroen
ID/DS, starting from year of construction 1965. Or. No. D1826A
DS starting from 65, elbow pipe. Suitable for Citroen ID/DS 19, starting from year of construction
1965. For the engines: DY-DL-DLF-DV-DT. Or. No. DV18251
DS starting from 65, elbow pipe 2 in 1 (Y-pipe). Suitable for Citroen DS, starting from year of
construction 1965. Starting from engine DX. Or. No. DX18244.
DS starting from 65, elbow pipe 2 in 1 from high-grade steel (Y-pipe). Suitable for Citroen DS
starting from year of construction 1965. Starting from engine DX. Or. No. DX18244.
DS from 65, slotted nut, M7 thread. Width across flats 11mm. Attaches double elbow pipe (front
exhaust pipe) to the manifold. Suitable for Citroen DS.
DS from 65, slotted nut, M8 thread. Width across flats 13mm. Attaches double elbow pipe (front
exhaust pipe) to the manifold. Suitable for Citroen DS.
Flange gasket for the exhaust pot at the exhaust elbow. Suitable for Peugeot 204 + 304, of year of
construction 1967 to 1975 (engine: XK, XK4, XL3, XL3S, XL5). Peugeot 404, Peugeot 504. Inside diameter: 42mm. Or. No. 1721.01
Y-pipe seal doubles (fusion two in one pipe to the exhaust elbow). Heavy one: 1,0mm. Bore diameter
for each 36,5mm. Suitable for Peugeot 204, Peugeot 304 (engine XL5 + XK5). Peugeot 404, 504, 505, J5, J7. Or. No. 1710.09
Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of
construction 1965. Or. No. 1D 5412 149G + N181-2
Elbow seal exhaust 2CV6, improved version. The seal is made of most significant seal material
Preparation of Reinz Germany.
Exhaust manifold gasket made of copper 2CV6 (pure copper, 1.5mm thick!). Suitable for all 597/602cc
engines. Citroen 2CV6, Dyane 6, ACDY, Mehari, AMI8. Made in Germany
Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the left
and on the right the seal 30031 is required. Or. No. DX141-11 + 1D 5414 063L
Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x by
vehicle. In the center, the seal 30030 is installed. Or. No. DX141-12 + 1D 5414 064X
Elbow seal inlet 2CV6, improved version. The seal is made of most significant seal material
Preparation of Reinz Germany. Measurement: 28,3x43,75. Or.Nr.: 96177787
Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787. Measurement: 28,3x43,75mm
Original equipment manufacturer "Glaser"
Manifold seal inlet, for Citroen 2CV AZAM. Inside diameter: 34mm. Diameter securement: 8,0mm
Center to center securement: 55mm. Or.Nr.: AM1412C
Manifold seal inlet, centrically. Suitable for Citroen DS19, starting from year of construction
7/1959. Citroen HY. Inside diameter: 42mm. Connector long side: 100mm. Connector short side: 61mm. Bore for stud bolts: 8,5mm.
134 Articles | Page 1 of 3
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
