steering rods for Alle Alle

4CV, tie rod (adjustable). Suitable for Renault 4CV, to year of construction 1955. The tie rod fits

on the left and on the right! The tie rod end has an M8 screw connection.

4CV/Dauphine, tie rod (adjustable). Suitable for Renault 4CV, starting from year of construction

1955. Renault Dauphine. The tie rod fits on the left and on the right! The tie rod end has an M10 screw connection. The thread on the track rod has an M12 thread.

Spacer for the tie rod end. Suitable for Citroen 11CV. Dimension: 16.5 x 31 x 0,5mm. Or. No. 602.052

Sheet metal cap on the tie rod pin. Suitable for Citroen 11CV + 15CV. Or. No. 602046

Bolt in the steering gear. (2x bolts, 3x seat shell). Repair kit, ball diameter 25mm. The bolts

take up the tie rods. Suitable for Citroen 11CV + Citroen HY, from year of construction 1948 to 1965. Or. No. 601847, 601849, 601836

Dauphine, collar steering gear (per piece). Openings 31mm + 25mm. Minimum lengthens 95mm, maximum

length 230mm. Diameter over all 68mm.

Estafette, tie rod end outside. Suitable for Renault Estafette, of year of construction 02/1962 to

12/1981. Male thread M16 x 1,5. Or. No. 7701013272.

Estafette, tie rod end inside. Suitable for Renault Estafette, of year of construction 02/1962 to

12/1981. Male thread M16 x 1,5. Or. No. 7701013276.

Spring for the tie rod pin. Suitable for Citroen 11CV + 15CV. Dimension: 28 x 8mm. Or. No.89048

Rubber seal on the steering unit pin. Dimension: 32 x 16mm. Suitable for Citroen 11CV + 15CV. Or

No. 601946

Rubber cap for the tie rod end. Suitable for Citroen HY. Or. No. ZC9602046U.

J5/C25, tie rod without tie rod end, on the left + on the right fitting. Thread M16 x 1,5. Citroen

C25 + Peugeot J5, without power steering. Installed to year of construction 1990. Or. No. 381227

Tie rod end Citroen C25, Peugeot J5, Fiat Ducato. Starting from year of construction 1981, on the

left + on the right fitting. Thread M16x1,5, right-hand thread.

Crown nut M12 x 1,75. Suitable for the steering arm + tie rod. Citroen 11CV + 15CV.

Steering gear bellow from rubber, suitable for Citroen 11CV + 15CV. Dimension: 58 x 132mm. Or. No

602135

• Suitable for this article
• 
  Collars clip strap with lock (made from metal). Overall length: about 500mm
  2,73 €

Steering gear bellow from rubber, suitable for Citroen HY.

• Suitable for this article
• 
  Collars clip strap with lock (made from metal). Overall length: about 500mm
  2,73 €

Steering sleeve for CX from 1980 on, suitable for left and right side.

Collar steering gear. Suitable for Renault R8, Alpine, Simca 1000. Matra Djet. Assembly diameter

about 40mm + 10mm. Or. No. 7700653459

Nut selflocking M14 x 1,5. E.G. suitable for tie rods Renault R4.

Nut M12x1

Hub nut for the lower steering unit pin. Suitable for Citroen 11CV + 15CV. Thread: M34 x 150. Or

No. 601877

P 104/204/304, bonded-rubber bushing for the gear rack. Suitable for Peugeot 104, 204, 304. Inside

diameter: 10mm. Outside diameter: 24mm. Length inside: 24mm. Or. No. 4059.04

P 203/403, bonded-rubber bushing gear rack end at the steering gear, for the mounting of the tie

rod. Peugeot 203 + 403. 12x30x30x24mm. 5248.04

P 204, tie rod complete, left. Suitable for Peugeot 204, to year of construction 1969. Or. No

3814.06 Made in Italy

P 204, tie rod complete, right. Suitable for Peugeot 204, to year of construction 1969. Or. No

3813.29 Made in Italy

P 204/304, tie rod left, complete. Suitable for Peugeot 204 + 304, starting from year of

construction 1969. Or. No. 3813.39

P 204/304, right tie rod completely (inclusive tie rod end). Suitable for Peugeot 204 + 304

starting from year of construction 1969.

P 204/304/404, tie rod end repair set. Suitable for Peugeot 204, 304 + 404. Thread M10, length

58mm, ball diameter 22mm - 14mm highly. The synthetic half shell (nylon) is 6,5mm highly!

P 204/304/404, tie rod end repair set. Suitable for Peugeot 204, 304 + 404. Thread M10, length

58mm, ball diameter 22mm - 14mm highly. The synthetic half shell (nylon) is 8mm highly!

P 304, tie rod, without tie rod end. Length: 320mm. Thread: M12x1 + M14x1,5. Suitable for Peugeot

304. The tie rod fits on the left + on the right. Per piece

P 304/104/205/Visa, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height

ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot 304 starting from 1972, Peugeot 104, Peugeot 205, Citroen Visa.

P 403, tie rod end completely, for Peugeot 403. 28,5mm mounting. Compare please! There was also

28,0mm mounting! Or. No. 389906

P 404, bonded-rubber bushing gear rack end at the steering gear, for the mounting of the tie rod

Peugeot 404. 12x30x30x24mm

P 404, left track rod (inclusive tie rod end). Suitable for Peugeot 404. Female thread M16 x 1,5

Or. No. 3813.38 Made in Italy

P 404, tie rod, right. Suitable for Peugeot 404, of year of construction 1963 to 1971. Or. No

3814.11 Made in Italy

P 504, tie rod completely (inclusive tie rod end + collar steering gear). Suitable for Peugeot 504

Cabriolet + Coupe. Also suitable for Peugeot 104, Peugeot 505. Citroen VISA. Or. No. 3812.15. The tie rod is on the left + on the right identically.

P 504, tie rod completely (inclusive tie rod end). Suitable for Peugeot 504. The tie rod fits on

the left + on the right. Per piece. Total length turned completely together, from the middle of the ball head to the middle of the fork head: 270mm. Middle threaded tube, total length: 162mm. M14 adjustment thread on both sides. Or. No. 3813.35 Made in Italy

P 504, tie rod completely. Suitable for Peugeot 504, starting from year of construction 1980

(sedan, Cabriolet + Coupe). Peugeot 604. Per piece. The tie rod is on the left + on the right identically. Or. No. 3812.17 Made in Italy

P 504, tie rod, old version. Left + right = identical. Per piece. Suitable for Peugeot 504, made in

Italy. Length centre fork head to centre ball head = 275mm.

P 504, tie rod, without tie rod end. Length: 262mm long. 1x male thread M12x1,0 + 1x female thread

M14x1,5mm. Suitable for Peugeot 504 Cabrio + Coupe, Peugeot 604.

P 504, tie rod end repair set. Suitable for Peugeot 504 (1 serie), to year of construction 1979

Suitable for on the left + on the right. Or. No. 3899.12

P 504, tie rod end repair set. Suitable for Peugeot 504 (1 serie), to year of construction 1979

Suitable for on the left + on the right. Or. No. 3899.18

P 504/505/604, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height

ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot to year 1980. Peuheot 505 + 604.

P 504/604, collar for the steering column (power steering). Suitable for Peugeot 504 + 604. Or. No

4066.16

P 504/604, tie rod end (fits on the left or on the right). For Peugeot 504, to year of construction

12/1979. Peugeot 604. Thread: M14x1,5 Made in Italy

R12/R15/R17, left track rod. Length: 236mm. Cone: 13mm. Or. No. 7700571172

R12/R15/R17, right track rod. Length: 236mm. Cone: 13mm. Or. No. 7700571173

R16, track rod on the left + right (1 set). Suitable for Renault R16. Or. No. 7700554493 +

7700554494 Made in Italy

R16/R12, gear rack eye (tie rod securement) for Renault R12, R16, R15, R17, R20. Thread M12x1. Or

No.7700504987

• Suitable for this article
• 
  Nut M12x1
  0,79 €

R16/R12/R17, steering gear - tie rods collar set (2 fittings). Suitable for Renault R16, R12, R17.