upholstery, suspension seats, material for Alle Alle
72 Articles | Page 1 of 2
Padding set seat in front. Consisting of: Jute clamping cover with felt underlays, foam material
Suitable for 1 seat. For Citroen HY.
CX, foam material upholstery for 1 seat in front (CX series of 1). Consisting of 5 sections
Suitable for Citroen CX, 1 series. Good reproduction.
Cushion frame for one seat in front. Suitable for Citroen DS, up to year of construction 09/1968
Only fitting for the seat pillow, not for the backrest. On the left or on the right fitting. Per piece. Made in Germany.
Rubber ring with hook, for the upholstery of the seats. 50 pieces! Very good quality from the
original manufacturer. These rubber rings are slightly more elastic, softer, than the replica rubber rings (18026). Suitable for Citroen 2CV, Dyane, HY. Or. No. A922114.
Rubber ring with hook, for upholstering the seats. Per piece. Replica. Suitable for Citroen 2CV
Dyane, HY. The replica rubber rings are somewhat tighter, harder, than the original rubber 18442. Or. No. A922114. In the 2CV seat there are 22 rubbers in the lower seat and 26 rubbers in the backrest. There are approx. 100 rubbers in a seat bench.
Belt conversion kit suitable for the backrest (for 1 seat in front), for Citroen 2CV. The belts
renewed the rubbers and the jute cover underneath the upholstery. Note: The belts are only for the backrest. For the seat face you require our number 18099. Made in Germany
PDF FILE 
Belt conversion kit suitable for the backrest of the rear seat bench, for Citroen 2CV. The belts
renewed the rubbers and the jute cover underneath the upholstery. Note: The belts are only for the backrest. For the seat face you require our number 18253. Contents: 2x 37cm belt, 2x 40cm belt, 2x 41cm belt, 18x 42cm belt. Made in Germany
Belt conversion kit suitable for the seat face (for 1 seat in front), for Citroen 2CV. The belts
renewed the rubbers and the jute cover underneath the upholstery. The belts give a tauter seat face. Note: The belts are only for the seat face. For the backrest you require our number 18100. Made in Germany
Belt conversion kit suitable for the seat face of the rear seat bench, for Citroen 2CV. The belts
renewed the rubbers and the jute cover underneath the upholstery. The belts give a tauter seat face. Note: The belts are only for the seat face. For the backrest you require our number 18254. Contents: 16 x 42cm belt + 6x 43cm belt. Made in Germany
Hook suitable for seat rubber, for Citroen 2CV, of year of construction 1949 to 12/1954. 25x30 mm
The hooks are for the wide flat rubbers.
Under cover made of sturdy cotton fabric, for 2 seats in the front! The jute cover has been
replaced by a sturdy cotton fabric. You sit a little tighter and the bottom cover does not tear so quickly. The set is suitable for 2 front seats!!! Made in Germany
Jute underlay cover with iron wire sides, for 1 rear seat bench AMI6 (the cover is fitted under the
seat and backrest). Suitable for Citroën AMI6.
Jute underlay cover with iron wire sides, for 2 front seats AMI6 (the cover is fitted under the
seat and backrest). Suitable for Citroën AMI6.
Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)
1 complete set suitable for 1 seat. Suitable for Citroen 2CV.
Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)
1 complete set bench front, and + 1x seat bench rear (8 pieces). Suitable for Citroen 2CV + Dyane. Made in Europe.
Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)
1 complete set for 2x seat in front + 1x seat bench rear (8 pieces). Suitable for Citroen 2CV + Dyane. Made in Europe.
Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)
1 complete set is for 1 seat bench. Suitable for Citroen 2CV. Fits for symetric and asymetric bench.
Clip (200 fittings) for the coverings. Suitable for Citroen, Peugeot, Renault. If the seats are
again upholstered, this clip is required. The suitable pliers have our number 18084.
Hog Rings (500 per pack) for 21048 automatic pliers (coverings). Suitable for Citroen, Peugeot
Renault. The suitable pliers have our number 21048.
Clip for the securement of the coverings at the seat frame. (slide-on clamp with hooks). Suitable
for citroen 2CV, Dyame, Ami, DS, HY.
Hog Ring Pliers for use with A7 Hog Rings (Part No 21049). Complete with automatic feed. Ideal for
continuous connections. Single handed operation. Ideal for upholstery on classic cars.
Hog ring plier for the mounting of coverings (workshop quality). With this pliers the hog ring`s
18420 are optimally treated.
R4, spring core (front seat) under the foam (important for the original spring behaviour of the
seats). Suitable for Renault R4 (depending on the country version).
R4, foam material front seat, for the seat face. Suitable for Renault R4, starting from year of
construction 1980. Overall dimensions: 52 x 49cm. Seat frame support: 46 x 46cm.
R4, foam material front seat, for the seat face. Suitable for Renault R4, to year of construction
1980. Overall dimensions: 49 x 49cm. Seat frame support: 45 x 46cm
Revolver hole punch. For diameters of: 2.0 + 2.5 + 3.0 + 4 + 4.5 mm. The lever ratio requires less
effort. These hole punches are actually known for belt holes. However, we use them to punch holes in the jute tensioning cover under the seat covers in the Citroën 2CV or Dyane. This makes it much easier to install the tensioning rubbers.
72 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
