wheel bearings for Alle Alle

Sealing rubber, for the seal of the wheel bearing, to the drive shaft. Suitable for Citroen DS. Per

piece. Dimension: 104.8 x 109.9 x 8. Or. No. DX37394

Hub nut - crown nut M16x1,5. Low version. Suitable for Renault R4.

Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor

quality. Tightening torque: 343-392Nm.

• Suitable for this article
• 
  Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing
  2,93 €
• 
  44 socket thin-walled, for the drum rear (release the hub nut). Suitable for
  22,71 €
• 
  Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• 
  Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool
  38,58 €

Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening

torque: 343-392Nm. Original Citroen! The better choice.

• Suitable for this article
• 
  Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing
  2,93 €
• 
  44 socket thin-walled, for the drum rear (release the hub nut). Suitable for
  22,71 €
• 
  Ratchet reduction. From 3/4 inch (socket wrench) on 1/2 inch (ratchet).
  7,93 €
• 
  Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool
  38,58 €

Hub nut. Thread: M18 x 1,5. Suitable for Peugeot 104, 204, 304, 403, 504 (starting from year of

construction 1982). Or. No. 6935.40

Hub nut. Thread: M22 x 1,5. Suitable for Peugeot 204, 304, 205. Or. No. 6935.41

Check disk wheel bearing (lock washer wheel hub). Suitable for Peugeot 203, 403, 204, 404 + 504 (to

year of construction 1976). Inside diameter: 18,0mm. Or. No. 3736.08

Dauphine/R(/R10, wheel bearing set in front, suitable for Renault Dauphine, R8, R10. The bearing

set consists of 2 bearings. Bearing 1 = 17x40x13,2mm. Bearing 2 = 22x47x20,75mm. Or. No. 0857615500 + 0857615300.

Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease was

particularly developed for high-speed bearings (wheel bearings). Extremely acid-resistant! (Seawaters)

• Suitable for this article
• 
  Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• 
  Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!
  41,56 €

Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.

• Suitable for this article
• 
  Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• 
  Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!
  41,56 €
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating

wheel bearings, cardan joints etc.

• Suitable for this article
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Grease cap for 160mm brake drum. Suitable for Renault R4, Caravelle, Floride, Dauphine and many

other Renault. Front axle and rear axle. Overall height: 27mm. Outside diameter: 42mm. Or. No. 0607035200

Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the wheel

bearing, rear in the drum.

• Suitable for this article
• 
  Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of
  6,89 €

Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum

Caution: ring nuts may have different inside diameters. Maybe the grease cap should be wrapped with insulating tape to get it fixed in the ring nut!

• Suitable for this article
• 
  Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of
  6,89 €

Wheel bearing oil-seal-ring size 69x85x10. Peugeot J5, Boxer, Citroen C25, Jumper.

Crown nut for the wheel bearing at the rear axle. Suitable for Citroen 11CV + 15CV. Or. No. 421024

M16, nut M16x1,5, lock.

Nut, for the wheel hub rear axle. Suitable for Citroen DS. Thread: H25 x 150. Or. No. 0D5404980H

P 104/Visa, nut drive shaft in front, Peugeot 104, Citroen Visa + LNA. Thread M20x1,5. Or.Nr.693544

P 104/Visa, wheel bearing set for the front axle. Suitable for Peugeot 104. Citroen Visa (apart

t Diesel) from year of construction 1978 to 1989. Citroen LN + LNA. Outside diameter: 72,0mm. Inside diameter: 35,0mm. Overall height: 28,0mm. Or. No. 3350.11 + 3350.06. 7901335011

Wheel bearing Peugeot 104, Citroen Visa, LNA. Measurements: 25x47x15mm.

P 104/VISA/Talbot, wheel bearing set rear, Visa all models, LNA, Peugeot 104, Talbot Samba. 1x

bearing 47,1mm outside, 24,9mm inside, 11,6mm wide one. 1x bearing 42,1mm outside, 19,8mm inside, 12mm wide one.

P 203, wheel bearing front. Suitable for Peugeot 203. Outside diameter: 52mm. Inside diameter

20mm. Wide one: 15mm. Or. No. 2372.05

Wheel bearing Peugeot 204, 304, 305. External dimensions: 52mm, internal dimension: 25mm, height

16,25mm,

P 203/403/404/504, grease cap out of sheet metal. Diameter: 66mmm. Suitable for Peugeot 203, 403

404, 504 (to year of construction 1976). Or. No. 3740.07

P 203/403/404/504, wheel bearing shaft seal in front. Suitable for Peugeot 203, 403, 404, 504

Dimension: 42 x 62 x 10mm. Or. No. 3724.08

P 204/304, wheel bearing in front. Outside diameter: 80mm. Inside diameter: 40mm. Wide one: 30,2mm

Suitable for Peugeot 204, of year of construction 09/1968 to 1976. Peugeot 304, to year of construction 1980. Or. No. 3326.20 Made in Spain

P 204/304, wheel bearing set rear. Dimension bearing 1: 20x47x15mm. Bearing 2: 25x52x16,4mm

Inclusive shaft seals. Suitable for Peugeot 204 + 304.

P 204/304, shaft seal wheel bearing (exterior). Outside diameter: 81,2mm. Inside diameter: 54mm

Height: 10mm. Suitable for Peugeot 204 + 304. Or. No. 3345.22

P 204/304/504/505, wheel bearing shaft seal. Dimension: 54 x 72 x 10mm (wheel bearing inside)

Suitable for Peugeot 204, 304, 504, 505, 604. Or. No. 3345.17

P 204/304/504/505/604, shaft seal wheel bearing (exterior). Outside diameter: 70mm. Inside

diameter: 55mm. Height: 10mm. Suitable for Peugeot 204, 304, 504, 505, 604. Or. No. 3346.06

P 204/403/404/504, wheel bearing rear (exterior bearing). Outside diameter: 52mm. Inside diameter

20mm. Wide one: 15mm. Suitable for Peugeot 204, 403, 404 + 504. Or. No. 3735.03 Made in Spain

P 403, wheel bearing shaft seal. Dimension: 38 x 52 x 10mm. Suitable for Peugeot 403.

P 403/404, wheel bearing in front. Dimension: 30 x 62 x 16mm. Suitable for Peugeot 403 + 404. Or

No. 3730.04

P 403/404/504, wheel bearing set rear. Suitable for Peugeot 403, of year of construction 1958 to

1966. Peugeot 404 (sedan, Cabriolet + Coupe) of year of construction 1960 to 1975. Peugeot 504 (sedan, Cabrio + Coupe) starting from year of construction 1973. Outside diameter: 72,0mm. Inside diameter: 35,0mm. Overall height: 17,0mm.

Wheel bearing oil-seal-ring 45x62x12. Peugeot 403, 404, 504, J7. Made in Germany.

P 404, hub nut in front (front axle). Thread: M18 x 1,5. Or. No. 693540

P 404/504, wheel bearing set in front. Suitable for Peugeot 404 + 504 (to year of construction

10/1976). Dimension bearing 1: 52 x 20 x 15mm. Bearing 2: 62 x 30 x 16mm. Or. No. 3748.01

P 404/504, wheel bearing set, suitable for Peugeot 504 to year of construction 10/1976. Very good

d quality! Measurements: 1x bearing 30 x 62 x 16,0mm + 1x bearing 20 x 52 x 15mm. 1x shaft seal, 1 nut. Or. No. 374801

P 504, wheel bearing shaft seal, in front. Dimension: 45 x 60 x 10mm. Suitable for Peugeot 504.

P 504, wheel bearing in front. Dimension: 20 x 52 x 15mm. Suitable for Peugeot 504, of year of

construction 1968 to 1976. Or. No. 3735.03

P 504, safety sheet wheel bearing - drive shaft. Inside diameter: 26mm. Suitable for Peugeot 504

Or. No. 3736.15

P 504, centering ring wheel in the rear. Dimension: 40 x 57 x 53 x 12mm. Suitable for Peugeot 504

Pick UP. Or. No. 3334.31

P 504/505/604, wheel bearing rear. Dimension: 84 x 42 x 36mm. Suitable for Peugeot 504 sedan, of

year of construction 1968 to 1985. 504 Cabrio + Coupe, of year of construction 1976 to 1981. Peugeot 505 + 604. Or. No. 3326.13. Made in Spain

• Suitable for this article
• 
  Hub nut. Thread: M18 x 1,5. Suitable for Peugeot 104, 204, 304, 403, 504
  2,73 €
• 
  nut, driveshaft, Peugeot 104,204,304,305,404,504. thread: M16x1,5 , wrench
  4,87 €
• 
  Hub nut rear, Peugeot 404, 505, 505, 604. Thread M25 x 1,5, width accross flats
  4,94 €

Wheel bearing Peugeot 504, 505, 604. Measurements: 25x47x15mm.

P 504/505/604, wheel bearing in front, interiorlaterally. Dimension: 32 x 58 x 17mm. Suitable for

Peugeot 504, 505, 604. Talbot Togara. Or. No. 3730.17 Made in Spain

P 504/505/C25/J5, rear wheel bearing set. Outer diameter: 90mm. Inner diameter: 40mm. Width: 25mm

Suitable for Peugeot 504 Pick Up from year of construction 07/1981 to 02/1994. 504 GR Pick Up from 08/1990 to 10/1999. Peugeot 505 Break (04/1982 > 11/1995). Peugeot J5 (09/1990 > 03/1994). Citroen C25 (07/1981 > 02/1994). Or. No. 3326.28 + 3334.31 + 3325.52 + 3325.50. Citroen 9403221108

P 504/604/505/Talbot Tagora, wheel bearing kit, rear, size: 42x84x36

P 504/605/505, Front wheel bearing set. Suitable for Peugeot 504, from 06/1969 to 09/1993. Peugeot

505 from 05/1979 to 12/1990. Peugeot 604 from 03/1976 to 12/1986. Talbot Tagora from 07/1980 to 12/1984. Dimension bearing 1: 47 x 25 x 15mm. Bearing 2: 58 x 32 x 17mm. Or. No. 3748.09

R4/R5, thrust washer - brass sealing disc. This disc is mounted on the drive shaft and seals the

wheel bearing to the rear. Suitable for Renault R4, R5, R6. Or. No. 7700528678