Door strap inside. Color grey. Suitable for Citroen 2CV with high door linings. The door strap is
about 260mm long and with the sheet metals 18130 locked.
You are currently searching without specifying a vehicle / model.
To give you a better search experience, we recommend that you select your vehicle.
Select vehicle now No thanks
about 260mm long and with the sheet metals 18130 locked.
about 260mm long and with the sheet metals 18130 locked. Made by Franzose/CiPeRe
production end (R1062). Overall length: 2130mm. Sleeve lengthens: 1700mm. Or. No. 8351847
LNA. Simca 1307, 1308, 1510, Samba. Diameter: 86 + 24mm
Talbot 1307, 1308, 1510, Solara. Inside diameter: 28mm + 78mm
Mehari. Please note: This washer is specially designed for the brake calliper. It is 3mm thick and black galvanised. If a normal washer (thinner) is used, the fixing screw is often too long! (Brake calliper cannot be fastened properly or gearbox housing tears)
Dimensions: 10 x 6.2 x 1.9 mm, suitable for Citroën 2CV, Dyane, AMI. Please note: Only suitable for our reproduction brake calipers 13013.
to year of construction 1990 (8mm brake line screw connection). No old part return required! Attention: A 3mm washer must be used for the mounting screws (our number 1300) or continue to use the original washers. Without these 3mm washers, the fastening screws are too long!
10/1959 to 04/1966. Citroen HY. Renault Alpine 1300, from of year of construction 01/74 to 12/75. Peugeot 204 + 304, 404, 504. Renault R4, R5, R6, R10, R12, R15, R16, R17, R20. Height over everything: 65mm. Inside diameter: 65mm.
depth only 30mm! Diameter 143mm. 40 Watt. 4 Ohm. Suitable for door panels of Citroen 2CV, Renault R4, Peugeot 204 - 504..... Particularly flat design, therefore super suitable for door panels (also Citroen 2CV + Renault R4). Outer diameter = 143 mm, cut-out for installation opening in the door panels = 120 - 130mm. Dualcone loudspeaker.
R1237, 1300). Or. No. 7701365171. Connections: 2x 1/2 x 20 UNF. Brake fluid reservoir: M16 x 1.5. Mounting hole spacing: 70 mm. Diameter: 7.5 mm.
R2131, R2132, R2133, of year of construction 10/1961 to 05/1964. Brake line connector: 2x 3/8x24UNF + 1x 7/16x20UNF. Thread brake fluid reservoir: M16x1,5. Made in France
R2131, of year of construction 07/1959 to 09/1961. Brake line connector: 2x 3/8x24UNF + 1x 7/16x20UNF at the front side. Thread brake fluid reservoir: M19. Outside diameter: 42mm. Fixing hole distance from center to center: 60mm. Diameter fixing hole: 8,8mm. Length over everything: 140mm. Made in France
t Estafette R2130, R2132, R2133, R2131, of year of construction 07/1959 to 05/1964. Made in France
AK400, ACDY, AMI6+8. The suspension pot casing is supplied without locking caps.
Pitch diameter: 3x130mm. Insertion depth: 28mm. The rim has centrically no hole for the mounting of a wheel cover! Or. No. 7701349069. !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!
Insertion depth: 28mm. Or. No. 7701349506 !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!
silver front and rim base, fits front and rear axle. Hub cap is included. Body modifications not necessary. The rim comes with parts approval for Renault R4, R6 and all R5 models. Tyre recommendation: 155/70-13. On the Renault R4 with Girling caliper, it is essential to ensure clearance to the rim (or convert to Bendix). !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!
rim in Alpine Design, black with gloss-rotated front and rim well, fits on front and rear axle. Hub cap are provided. Body modifications not necessarily. The wheel rim is supplied with TÜV papers for Renault R4, R6 and all R5. Tire recommendation: 155/70 13. By Renault R4 with Girling brake caliper, must be absolutely respected the free movement to the rim (or converted to Bendix caliper) !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!
Design, fits on front and rear axle. Hub cap are provided. Body modifications not necessarily. The wheel rim is supplied with TÜV papers for Renault R4, R6 and all R5. Tire recommendation: 155/70 13. By Renault R4 with Girling brake caliper, must be absolutely respected the free movement to the rim (or converted to Bendix caliper). !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!
strut. Suitable for Citroen DS. Dimension rubber sleeve: 12 x 16 x 19 x 14,5mm. Or. No. 1D5413013
1307/1308/Horizon. dimension: Inside diameter 10mm. Outside diameter 30mm diameter. Height of 20mm. Or. No. 5181.06 + 5093.03
starting from Ident. 421238. Caravelle R1133 starting from Ident. 29625. R10 R1190 + R1192 starting from Ident. 243215 (year of construction 1969 to 1972). Length totally: 1870mm. Sleeve: 820 + 810mm. Or. No. 8558509
Diameter: 28mm. Or. No. ZC9613022U
48,4mm. Heavy 5.50>5,51mm. Or. No. DX41304R
810,05 + 1300S. Diameter: 170mm.
09/1975 to 1980. Engine: 810-10. Diameter: 180mm.
construction 1971 to 1985. Engine: 810-10. Diameter: 170mm.
(R1128, 112C, S128, 210B, 239B, R2370 chassis N° 153413 - > N°). Renault R5, R7, R12. The clutch has 180mm diameter, the clutch disk 20 teeth. Brand quality (SACHS/Valeo). Or. No. 7711130003 (complet). 7701349936 (clutch disk). 7711130000 (pressure plate). 7701348231 (clutch release sleeve).
(R1128, 112C, S128, 210B, 239B, R2370 chassis N° 153413 - > N°). Renault R5, R7, R12. The clutch has 180mm diameter, the clutch disk 20 teeth. Reproduction. Or. No. 7711130003 (complet). 7701349936 (clutch disk). 7711130000 (pressure plate). 7701348231 (clutch release sleeve).
Caravelle (R1132 + R1133). The cable is to half in a metal tube. Or. No. 9842426. The nipple has 8mm diameter.