Bush (mounting for the axle) in the water pump housing. Suitable for Citroen 11CV + HY. Dimension
15 x 19 x 32mm. Or. No. 3293S
Search for Bus
You are currently searching without specifying a vehicle / model.
To give you a better search experience, we recommend that you select your vehicle.
Select vehicle now No thanks
142 Articles | Page 1 of 3
Bush (bearing) from bronze, for the brake shoes. Suitable for Citroen 11CV + HY. Dimension: 20 x 22
x 10mm. Or. No. 438314 + ZY9438656U. Note: For HY the bushes must be shortened on an height of 8,5mm (grind off).
Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174
This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....
Bush in the fly wheel. Suitable for Peugeot 204, 304, 404, 504. Inside diameter: 12mm. Outside
diameter: 15mm. Height: 15mm.
Bushing bumper rear for Peugeot 404 from 04/1963 to 12/1971. For 504 from 06/1968 to 02/1971 and
for 604 from 09/1979 to 05/1983. Inside diameter: 12mm, outside diameter: 30mm, heigth: 24mm.
Dauphine/R8/R10/Caravelle, bush in the upper transmission suspension. Suitable for Renault
Dauphine, R8 + R10, Caravelle, Floride. Or. No. 8300009
Guide bush at the seat slide, for the seat level adjustment. Suitable for Citroen DS Pallas. Per
piece. Or. No. 1D 5411 153F
Rubber bush for the gas linkage bearing in the engine compartment (at the front wall). Suitable for
Citroen DS, of year of construction 1966 to 1969. Interior bush diameter: 6mm. The rubber serves as spare part for the complete fixture.
Rubber bush (2 fittings) anti roll bar rear, down. Suitable for Citroen 11CV + 15CV. Bore 16,5mm
Cone from 30,5 to 26.5mm. Overall height of 17mm. Or. No. 421014
Rubber bush (bearing) for the steering column above. Suitable for Citroen 11CV, 15CV, HY. Diameter
top: 45,34mm. Diameter bottom: 42,34mm. Or. No. 602169
Rubber bush, for the sheet metal holder of the wiper engine. Suitable for Citroen 11CV + 15CV
Citroen HY. Dimension: 15 x 10,5mm. Or. No. 721187
Rubber bush, for the fixture of the windshield wiper linkage. Suitable for Citroen DS, to year of
construction 05/1960. Or. No. D565-104
Rubber bush, for the screwed joint from the heater casing. Suitable for Citroen DS. Per piece
Dimension: 12 x 20 x 17. Or. No. 5416809J + D565-104
Rubber bushes (3 pieces), for the wiper operating lever. Suitable for Citroen 11CV + 15CV
V. Dimension: 2.8 x 7mm. Or. No. 721193
Bearing bush with rubber, for the steering column at the top. Suitable for Citroen 11CV + 15CV
Citroen HY, to year of construction 1965. Dimension: 36.7 x 22.5 x 30mm. Or. No. 604129 + 604130
Mounting bush shock absorber rear for Peugeot 504 (A,M) 1,8 from 06/1968 to 02/1971, for Peugeot
t 505 1,8 from 06/1981 to 10/1985, for Peugeot 604 2,3D from 09/1979 to 05/1983. Inside diameter: 12mm, outside diameter: 30mm, length: 24mm, total length: 73,8mm. Or.no.: 524816
Mounting bush wishbone for the front axle, for Peugeot 504 from 07/1968 to 02/1971, for Peugeot 505
5 from 06/1981 to 10/1985, and for Peugeot 604 from 09/1979 to 05/1983. Diameter 38mm, length 42mm, inside diameter of 16mm.
R5, bushing for gear shift. Fits Renault R5, for conversion to gearbox 385. This means that there
is only a 12mm bolt at the bottom of the gearbox. Since the diameter of the shift rod is then larger, this bushing is needed for reduction.
2CV, brass bushings in pedal floor for standing brake pedal + clutch pedal (guide for the pedals in
the floor panel). Suitable for Citroen 2CV, AZU up to approx. year of construction 1970.
2CV old, pedal floor plate doubles (with brass bushes). Strengthened version. For all Citroen 2CV
with standing brake + clutch pedal (installed until about 1970). The pedal floor plate is electrolytically coated (very good rust protection). The pedal floor plate has like original 2 brass bushes in front, for the clutch and the brake. Made in Europe.
4CV/Dauphine/Floride, bonded-rubber bushing for the kingpin. Suitable for Renault 4CV, Dauphine
Floride, Caravelle, Juvaquatre. Peugeot 201, 302, 402. Citroen C4, C6, Rosalie. Dimension: 12 x 26 x 36 x 32mm. Per piece. Or. No. 8535735
4CV/Dauphine/Floride, bonded-rubber bushing for the wishbone. Suitable for Renault 4CV, Dauphine
Floride. Dimension: circa 16 x 36 x 38 x 35mm. Per piece. Or. No. 8535734
4CV/Fregate, bonded-rubber bushing for the lever arm shock absorber, in the connecting rod
(coupling rod). Suitable for Renault 4CV + Renault Fregate. Dimensions: 9 x 21 x 21 x 17mm. Or. No. 8 511 922
Stub axle repair set (2 pieces), with bonded-rubber bushings. Suitable for Renault 4CV (2 version)
Renault Dauphine, Alpine A106, Alpine A108, Floride R1092. Or. No. 9815621
Kingpin oversize (17,08mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,08mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,041 > 17,07mm (with a reamer, according to ISO 286-2! Made by Franzose/CiPeRe
Kingpin oversize (17,12mm) for Citroen 2CV (Dyane, Mehari..). Complete with all bushes and shims
(2,0 + 2,3 + 2,5mm). One side. Suitable for all years of construction! Excellent reproduction. Made by Franzose. This bolt (and of course all bushes) have an oversize of 0,12mm. With this the oval guide in the swing arm can be repaired. Attention: The kingpin guide in the swing arm must be reamed to the dimension of 17,081 > 17,11mm (with a reamer, according to ISO 286-2)! Made by Franzose/CiPeRe
Kingpin for Citroen 2CV, with alloyed bushes. Complete with all sleeves and spacers (2,0 + 2,0 +
2,5mm). Per side. Suitable for all years of construction.
Kingpin reamer (hobby tool) (quick adjustable), for Citroen 2CV, Dyane, AMI, Mehari. Adjustment
range: 17.0mm - 19.0mm. Receptacle: square. With this tool the swing arm and the bushings of the hub can be reamed to the exact size. This reamer is a "hobby tool". The quality should be sufficient for one-time use. We also have a professional tool under no. 12393 in our programme.
Starter brushes Ducellier (type 6215A). Suitable for Renault R4 (starter motor with 2 securement)
Dimension: 15.0 x 8.0 x 15,0mm. Dimension of the bushes: Outside diameter 15mm. Inside diameter: 12mm. Length: 15mm.
Kunststoff-Teufel® is a highly active and electrolytic cleaning agent. It effortlessly removes the
strongest grease and oil stains, nicotine, soot, burnt-in stains and much more from plastics and other alkali-resistant surfaces. An antistatic and dirt-repellent surface is left on the cleaned surfaces. Kunststoff-Teufel® is the perfect cleaner for household, hobby and business (e.g. ideal for cleaning kitchens, blinds, caravans, garden furniture, tarpaulins, car and truck interiors etc.). 1000ml spray bottle! We ourselves only work with the "Teufelsreiniger" (devil's cleaner). We have only had the best experiences. Made in Germany
Suspension pot locking cap, for small suspension pot. Suitable for Citroen 2CV, Dyane. The lids are
inclusive brass bush and rear sealing ring. Per piece. Or. No. AZ434-96. Made by "Franzose / CiPeRe".
Throttle linkage bearing in the engine compartment (at the front wall). Suitable for Citroen DS, of
year of construction 1966 to 1969. Interior bush diameter: 6mm. Or. No. DX142172
Throttle linkage bearing in the engine compartment (at the front wall). Suitable for Citroen DS, of
year of construction 1969 to 1974. Interior bush diameter: 8mm. Or. No. DX142172A
Radiator hose set made of silicone! Suitable for Citroen DS 21 IE + DS 23 IE. This complete
radiator hose set is only suitable for the DS fuel-injected. Made of silicone (silicone = motorsport-proven, very robust radiator hoses! Extremely resistant and durable. Made in France
142 Articles | Page 1 of 3
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
