clutch for Alle Alle

Clutch latching, in the exchange. Suitable for Citroen DS, with semiautomatic gearboxes. 100 euros

Old part deposit. Or. No. DS314-253

Clutch cable reversing lever bearing bush. Suitable for Citroen DS. Dimension: 7.2 x 20 x 7,2mm

Or. No. DM314-95B

Clutch cable reversing lever set, for clutch cable with approx. 596,5mm length. Only suitable for

Citroen DS IE (injection). Consisting of: lever, spring, bearing.

Clutch cable reversing lever set, for clutch cable with approx. 605,0mm length. Only suitable for

Citroen DS with carburetor engines. Consisting of: lever, spring, bearing. Or. No. DV31433A.

Clutch cable reversing lever, for clutch cable with about 596,5mm length. Only suitable for Citroen

DS IE (injection engine). Or.Nr.1D5438342N + DX31433

Clutch cable reversing lever, for clutch cable with about 605,0mm length. Only suitable for Citroen

DS with carburetor engines. Or. No. DV31433A. Made in Germany.

M8x20, hexagon socket screw (female hexagon) M8x20mm. Suitable for Citroen DS clutch pressure

plate, starting from year of construction 7/1972.

Brass bush for the clutch release yoke. Suitable for Citroen 11CV. Or. No. 451570

Driver disc for GS, 180mm.

Clutch disk (new part). Suitable for Citroen 11CV. Dimension: 214 x 4 x 4mm. 8 teeth. Or. No. 490986

Clutch disk of 10 teeth, like original. Suitable for Renault with rear engine (4CV, Dauphine

Floride).

Clutch disk 180mm diameter, 18 teeth. Suitable for Talbot 1307-1510, Horizon 1.3, Matra Bagheera

Rancho 1.4, Simca 1100 (1.1 + 1.3).

Clutch disk, new part. Suitable for Citroen HY, starting from year of construction 10/1968. 8

teeth. Diameter: 215mm. Thickness under load: 9,3mm. Or. No. H313-01B. Made in Europe

Clutch disk, new part. Suitable for Citroen HY, to year of construction 10/1968. Diameter: 215mm

Or. No. H31301A

Clutch disk, suitable for Renault Alpine A310 + Renault R30. Diameter: 235mm (235 x 162 x 3,2mm)

Number of teeth: 10. Hub profile: 24,5x29

Clutch disk, suitable for Renault Caravelle, R8. Diameter: 160mm. Number of teeth: 20. Hub profile

15.2 x 17,3-20N. Manufacturer: Sachs

Clutch disk, suitable for Renault Caravelle, R8. Diameter: 160mm. Number of teeth: 20. Reproduction

Clutch disk. Diameter: 180mm. Teeth: 10. Suitable for Renault Estafette. (181x124x3,2mm)

(23x18x10mm)

Clutch disk. Diameter: 235mm. Teeth: 21. Suitable for Renault Alpine A310. Renault R30

(235x162x3,2), (21x24xev)

P 203, clutch disk. Suitable for Peugeot 203. Diameter: 200mm. 10 teeth. For shaft with 30x25mm

Or. No. 2054.12

• Suitable for this article
• 
  P 203/403 clutch pressure plate (new part). Suitable for Peugeot 203 + 403. For
  286,59 €
• 
  P 203/403/404, clutch release sleeve such as original (with graphite coil)
  59,41 €

P 203/403 clutch pressure plate (new part). Suitable for Peugeot 203 + 403. For clutch disk

diameter: 200mm. Or. No. 2003.44

• Suitable for this article
• 
  P 203, clutch disk. Suitable for Peugeot 203. Diameter: 200mm. 10 teeth. For
  86,18 €
• 
  P 203/403/404, clutch release sleeve such as original (with graphite coil)
  59,41 €

P 203/403/404, clutch release sleeve such as original (with graphite coil). Suitable for Peugeot of

203. 403 + 404 with C3 gearbox. Diameter graphitic coil: 60mm. Inside diameter graphitic coil: 35mm. Total width: 96mm. The clutch release sleeve is supplied in a strengthened version. Or. No. 2041.11. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.

• Suitable for this article
• 
  P 403/404, release bearing fixing clip (long version). Suitable for all Peugeot
  5,21 €
• 
  P 403/404, release bearing fixing clip (short version). Suitable for all
  2,29 €

P 204, clutch release sleeve Peugeot 204. For clutch Ferodo 200 DPP (200mm) + LUK TS 190 (190mm)

Or. No. 204125.

P 204, clutch release sleeve Peugeot 204. For clutch Ferodo 180 DP (180mm). Outside diameter

81.5mm. Inside diameter: 48mm. Overall height of the bearing: 23mm. Overall height over everything: 33mm. Or. No. 2041.18

P 204, clutch master cylinders. Piston diameter: 19,05mm. Suitable for Peugeot 204, of year of

construction 1965 to 10/1968. Made in France

P 204, clutch disk 190mm. 14 teeth. Suitable for Peugeot 204.

P 204/304, clutch master cylinder. Suitable for Peugeot 204 + 304, all model`s starting from year

of construction 10/1968. Piston diameter: 19,05mm. Connecting thread: M12x1. Fixing holes distance: 50mm. Or. No. 2095.09 + 2095.12. Made in Europe.

P 204/304, clutch taking cylinder repair set (only rubber). Suitable for Peugeot 204 + 304. For

piston diameters: 30mm.

P 204/304, clutch disk with torsion spring. Suitable for Peugeot 204 + 304. Year of construction

1968 to 1976. Diameter: 200mm. Teeth: 28. Or. No. 2054.46

P 204/304, clutch disk with torsion springs. Suitable for Peugeot 204 + 304. Diameter: 200mm

Teeth: 14.

P 204/304, clutch disk without torsion springs. Suitable for Peugeot 204 + 304. Diameter: 200mm

Teeth: 14. Or. No. 2054.63

P 204/304, shaft seal clutch (crankshaft gearbox side). Suitable for Peugeot 204 + 304. Dimension

60.5 x 78 x 9mm. Or. No. 2109.06

P 204/304. Clutch taking cylinder repair set (without piston). Suitable for Peugeot 204 + 304. For

piston diameters: 27mm.

P 204/304/305, shaft seal for the clutch. Suitable for Peugeot 204, 304, 305. Dimension: 40 x 49,8

x 5,5mm. Or. No. 2074.07

P 304/305, clutch disk. Suitable for Peugeot 304 Diesel (1,4+1,5D), starting from year of

construction 1976. Peugeot 305 Diesel (1,5+1,6D). Dimension: 200 x 137 x 3,2mm. 28 teeth.

P 403/404, release bearing fixing clip (short version). Suitable for all Peugeot 403 + Peugeot 404

(C3 gearbox). Attention: Long (71425) and short clamps (No. 71426) have been fitted. Depending on the version. Or. No. 2049.03

P 403/404, release bearing fixing clip (long version). Suitable for all Peugeot 403 + Peugeot 404

(C3 gearbox). Attention: Long (this) and short clamps (No. 71426) have been fitted. Depending on the version. Or. No. 2049.05

P 403/404, clutch release sleeve, for C3 gearbox (not suitable for BA7). Suitable for Peugeot 403 +

404, to year of construction 1967 (excluded 403 U8, 403/7 Diesel). For all engines. The clutch release sleeve is running in ball bearings. Or. No. 2041.11. Please preload the clutch adjust again. Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.

• Suitable for this article
• 
  P 403/404, release bearing fixing clip (long version). Suitable for all Peugeot
  5,21 €
• 
  P 403/404, release bearing fixing clip (short version). Suitable for all
  2,29 €

P 403/404, clutch disk for Peugeot 403 Diesel + 404 Diesel to year of construction 1967. For

engine: XDP85. Dimension: 200 x 30 x 10mm. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.

P 403/404, clutch disk. Suitable for Peugeot 403, of year of construction 1956 to 1964. Peugeot

404, of year of construction 1960 to 1967. Diameter: 215mm, 30x25x10. Teeth: 10. Lining thickness: 7,9mm. Or. No. 2054,16 + 2054.21. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.

P 404, clutch release yoke, for hydraulic clutch. Suitable for Peugeot 404 Diesel, starting from

year of construction 1967. Peugeot 305, 309, 405. Citroen C15, Citroen BX 19, starting from 1987. Or. No. 2117.42

• Suitable for this article
• 
  Bush for the clutch fork. Suitable for some Peugeot 205. Citroen C15, BX. Or
  2,13 €

P 404, clutch master cylinder. Suitable for Peugeot 404. Piston diameter: 19,05mm. Connection

M12x1. Distance of the fixing hole: 50mm. Or. No. 2095.11. Made in Europe.

P 404, clutch disk. Suitable for Peugeot 404 Cabrio + Coupe, starting from year of construction

1967. Dimension: 215 x 142 x 3,2mm. Hub profile: 29,4mmx24,5mm. 10 teeth.

P 404, improved line between clutch master cylinders and clutch taking cylinders. Suitable only for

Peugeot 404 sedan starting from year of construction 1967. (BA7 gearbox). This line with 2 flexible hoses renews the plastic line. Overall length about 760mm. Or.Nr. 209006

• Suitable for this article
• 
  P 404, clutch master cylinder. Suitable for Peugeot 404. Piston diameter
  46,51 €
• 
  P 404/504, clutch taking cylinder. Piston diameter: 28,57mm. Suitable for
  44,53 €

P 404/504, clutch release sleeve for Peugeot 404 gasoline + diesel, from year of manufacture 1967

Peugeot 504 (1.8 + 2.0 gasoline) + diesel. For clutch disc with 8 springs.

Clutch release bearing for Peugeot 404 1967>, 504, first construction, inner diameter: 33mm

outside: 63,5mm

P 404/504, clutch release yoke for BA7 gearbox (Bowden cable). Suitable for Peugeot 404, starting

from year of construction 1967. Peugeot 504 + 505. Length: about 195mm. Or. No. 2117.41

P 404/504, clutch completely (Diesel). Suitable for Peugeot 404 D. Peugeot 504 D. Engines: XD88

(1,9L), XD90 (2,1L) to year of construction 07/1981, XD2 (2,3L) to year of construction 07/1981. Reproduction with centering mandrel. Diameter: 215mm. Teeth: 10. Or. No. 2004.90

P 404/504, clutch completely (reproduction). Suitable for Peugeot 404, starting from year of

construction 10/1967. Peugeot 504. 4 liners petrol (engine capacity: 1796cc + 1971cc). Diameter: 215mm. Teeth: 10. Or. No. 2001.90 + 2004.89

P 404/504, clutch set, suitable for Peugeot 404, starting from year of construction 10/1967

Peugeot 504 (petrols), starting from year of construction 07/1968. For gearbox 4M (small clutch release sleeve). Diameter: 215mm. Number of teeth: 10. Hub profile: 10x24,5x29. Or. No. 2001.90 + 2004.89 + 2050.27.