drive shaft for Alle Alle
100 Articles | Page 2 of 2
M9, stud bolt, for the mounting of the drive shaft at the gearbox. Suitable for Citroen 2CV +
Citroen DS. Measurement: M9x42mm.
M9x25 / screw, tensile strength 12.9. E.g. for attaching the drive shaft to the gearbox, for
Citroen 2CV. Pitch 1.25.
Nut, for the connector Tripodes aluminum casing. Suitable for Citroen DS + Citroen HY. Per piece
Dimension: M12 x 1,25 (collar unit). Or. No. ZC9615032U
P 203/403/404/504, oil restraint coil, rear axle tube on the right. Suitable for Peugeot 203, 404
404 + 504. Outside diameter: 61,12mm. Inside diameter: 40,2mm. Marking: white. Or. No. 3045.17
P 203/403/404/504, shaft seal for the bearing of the full-floating axle. Dimension: 52 x 75 x 12mm
Suitable for Peugeot 203, 403, 404, 504. Or. No. 3345.09
P 204/304, drive shaft, fits on the left of or on the right. Peugeot 204 + 304. Overall length
740mm. External toothing: 23 teeth both sides.
P 304/305, drive shaft, fits on the left of or on the right. Peugeot 304. Overall length: 760mm
External toothing: 23 teeth both sides. Plus 75 Euro Old part deposit.
P 404 universal joint at the gearbox outlet, for the cardan shaft. Suitable for Peugeot of 404 with
BA7 gearbox. Number of teeth: 12 + 25. Or. No. 2619.16
P 404/504, neck journal bearing flange (outlet cardan shaft at the gearbox). Suitable for Peugeot
404 + 504. Or. No. 2608.10
P 404/504, cardan shaft center bearing. Outside diameter: 55mm. Inside diameter: 47mm. 16mm wide
Suitable for Peugeot 404 + 504. Or. No. 2811.08
P 404/504/505, universal joint at the gearbox outlet, for the cardan shaft. Suitable for Peugeot
404, of year of construction 11/1967 to 12/1971. Peugeot 504 (1796cm ³, 1971cm ³, 2664cm ³) sedan, BREAK, Cabriolet + Coupe. Peugeot 505 (all engines). Number of teeth: both sides 25. Or. No. 2619.17
P 404/504/505, shaft seal (with metal inset) for the wheel hub rear (full-floating axle)
Dimension: 53 x 79 x 10mm. Suitable for Peugeot 404, 504, 505. Or. No. 3345.31
P 505, drive shaft, fits on the left + on the right. For Peugeot 505 (all engines), starting from
year of construction 03/1979. Length: 741mm. Teeth wheel side: 27. Teeth at the differential: 27.
R16, drive shaft (new part). Suitable for Renault R16. Length: 649 > 670mm. Teeth outside: 20
Teeth inside: 23. Or. No. 7701348052
R4, drive shaft. Suitable for Renault R4 (fits left + right). Length: 620mm. Number of teeth on
wheel side: 23. Number of teeth on gearbox side: 20. New part. Original no. 7701498695
R4, drive shaft. Suitable for Renault R4 + R5 (fits both left and right), from the year of
construction 07/1973. Approx. length: 680-710 mm (the drive shaft features a length compensator!). New part! Manufacturer: SKF! Number of teeth on wheel side: 23. Number of teeth on gearbox side: 22. Please note: The SKF drive shaft has a diameter of 72 mm on the wheel side. Installation is much easier than with the 83384 reproduction drive shaft!
R4, drive shaft. Suitable for Renault R4 + R5 (fits both left and right), from the year of
construction 1979 onwards. Approx. length: 680-710 mm (the drive shaft features a length compensation mechanism!). New part! Number of teeth on the wheel side: 23. Number of teeth on the gearbox side: 22. Please note: on the wheel side, this drive shaft has a diameter of 82 mm! Fitting can be a bit fiddly! This is why the drive shaft is only suitable for cars constructed in the years of construction 1979 and later. This is because the lower suspension joints on cars constructed up to the year of construction 1979 are positioned higher!
R4, drive shaft. Suitable for Renault R4 (fits left + right). Length: 614mm. Number of teeth on
wheel side: 23. Number of teeth on gearbox side: 20. New part. Original no. 7701455342
R4/R5, thrust washer - brass sealing disc. This disc is mounted on the drive shaft and seals the
wheel bearing to the rear. Suitable for Renault R4, R5, R6. Or. No. 7700528678
R4/R5, O-ring for the drive shaft flange at the gearbox. Suitable for Renault R4, starting from
year of construction 1974. Renault R5 (type 354 - HA0). Or. No. 7700532957
R5 Alpine Turbo, drive shaft. Suitable for Renault R5 Alpine Turbo, built between 1977 and 1984
(fits left and right). Length: 620mm. New part. Item no. 7701348141
R6, drive shaft. Suitable for Renault R6 (fits left + right). Length: 633 mm. Number of teeth on
wheel side: 23. Number of teeth on gearbox side: 23. New part.
Screw for the driving shaft to the drive shaft. Gearbox side Installed. Suitable for Citroen for
2CV to year of construction 1971. Or.Nr.: AM451-94A
Locking plate, for the drive shaft securement at the gearbox. Suitable for Citroen HY. Or. No
ZC9409506U. Per piece. Made in Germany.
Shaft seal differential, complete in metal cage and felt cover. Dimension: 36 x 54 x 11mm. Suitable
for Renault R4, R5, R6, R15, R16. Or. No. 7703087011
Shaft seal (40 x 58 x 10) differential both sides. Suitable for Peugeot 204, 304, 305, 504, J7
Talbot Horizon, Samba, Solara. Inside diameter: 40.00mm. Outside diameter: 58.00mm. Heavy one: 10.00mm. Or. No. 3121.09. Made in Germany.
Shaft seal differential. Dimension: 28 x 45 x 8mm. Suitable for Renault 4 (first version)
Differential Peugeot 504, 505, 604. Made in Germany.
Shaft seal differential. Dimension: 36 x 54 x 7,5mm. Suitable for Renault 4 (final version), R5
R6, R15, R16. Made in Germany. Or. No. 7703087087
Shaft seal for drive shaft, at the differential outlet. Suitable for Citroen 11CV. Dimension: 36 x
83 x 12. Or. No. 408453. Made in Germany.
Shaft seal for the differential (drive shaft). Suitable for Citroen HY + Citroen 15CV. Dimension
61 x 40 x 12,5mm. Material: Vitton!. Or. No. ZC96112645U.
Shaft seal for the differential, seal to the drive shaft. Suitable for Citroen DS. Measurements: 39
x 65 x 8,5mm. Or. No. DV371-5
Tripodes case, inclusive new balls. For the securement, of the drive shaft. Suitable for Citroen DS
Citroen HY. Or. No. 2D5430517J
100 Articles | Page 2 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
