front axle for Alle Alle

Rubber stop for the front axle, mounts laterally at the chassis. Suitable for Citroen 2CV, AK

ACDY. The suitable nut has the number 12120. Made by Franzose/CiPeRe in Europe.

• Suitable for this article
• 
  Rubber stop distance disk (for the rubber stop of the front axle at the
  1,96 €
• 
  Nut M10, galvanized
  0,38 €
• 
  spring washer M10, galvanized
  0,24 €

Rubber stop round (conically), for the front axle. Suitable for Citroen DS. Diameter: about 54,5mm

Height: about 23mm. Or. No. D4373

Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen DS BREAK

Or.Nr.1E5410591X

Rubber stop squarely, fixing clip small for the rubber stop. Suitable for Citroen DS BREAK

Or.Nr.1E5410590L

Rubber stop squarely, above, for the front axle. Suitable for Citroen DS BREAK + Citroen SM. Or

No. 5410588

• Suitable for this article
• 
  Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen
  6,64 €

Rubber stop squarely, down, for the front axle. Suitable for Citroen DS BREAK + Citroen SM. Or. No

5410589

• Suitable for this article
• 
  Rubber stop square, fixing clip large for the rubber stop. Suitable for Citroen
  6,64 €

Rubber mounting for the couple rod. Suitable for Peugeot 304, 504, 505, 604. Simca

1307/1308/Horizon. dimension: Inside diameter 10mm. Outside diameter 30mm diameter. Height of 20mm. Or. No. 5181.06 + 5093.03

Rubber buffer for the lower crossbar. Suitable for Citroen 11CV. Dimension: 62 x 40mm. Or. No

426664

Rubber plug for the axle suspension. Suitable for Citroen 11CV + 15CV. Dimension: 22 x 17.5 x

21,5mm. Or. No. 309810

Ball-and-socket joint down, Peugeot J5 starting from 09/1985. Citroen C25 from 1981 to 03/1994

16mm mounting!

Rubber for stabilizer. Peugeot J5 starting from 1981, Citroen C25 starting from 1985.

Rubber bearing for wishbone Citroen C25, Peugeot J5, Fiat Ducato. On the left of or on the right

fitting. Inside diameter of 18mm, outside diameter 34mm, height of 40,6mm. Or. No. Fiat 4331968

J7, bonded-rubber bushing front axle Peugeot J7. Measurements: 16 x 36 x 47 x 36

J7, front axle wishbone fixture (bonded-rubber bushing). 8 item. Suitable for Peugeot J7 + J9.

Ball pin above (ball-and-socket joint), Peugeot J7, J9. Per piece!

Ball pin down (ball-and-socket joint), Peugeot J7, J9. Per piece!

Crown nut M12 x 1,75. Suitable for the steering arm + tie rod. Citroen 11CV + 15CV.

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Ball pin sealing. Suitable for Citroen DS, to year of construction 1966. Inside diameter: 21,5mm

Or. No. DS413-85

Ball pin setting shim down (front axle). Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x

48,4mm. Heavy 5.50>5,51mm. Or. No. DX41304R

Ball pin for the wheel suspension, front axle. Suitable for Citroen GS + GSA. Per piece. Fits above

down, on the left + on the right. Or. No. GX2010201A + 75522015 Made in Italy

Ball pin collar retaining clip (for the lower ball pin). Suitable for Citroen DS + Citroen SM. Or

No. 1D5410072K

Ball pin nylon disk (fitting down + above). For Citroen DS, starting from year of construction

1965. Or. No. DS443-94

Ball pin above (front axle, on the left or on the right). Suitable for Citroen CX, of year of

f construction 1974 to 1992. Or. No. 5429314, Made in Italy

Ball pin repair set above. Suitable for Citroen HY. Length: 84mm. Or. No. ZC9441176U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €

Ball pin repair set down. Suitable for Citroen 15CV + Citroen HY. Length: 105mm. Or. No. 441177 +

ZC9441177U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €
• 
  Locking plate, for a ball joint at the front axle. Suitable for Citroen HY. Or
  2,82 €

Ball pin down (front axle, on the left of or on the right). Suitable for Citroen CX, to year of

construction 1979. Or. No. 5429430 + 75529907 + 95558212 Made in Italy

Ball pin down (front axle, on the left of or on the right). Suitable for Citroen CX, of year of

construction 1979 to 1992. Or. No. 95558213, Made in Italy

Balls (15 pieces) for the bearing seat of the torsion bar suspension. Suitable for Citroen HY

Diameter: 3,97mm. Per side are 15 balls mounted. Or. No. ZD 9411 200 U

Ball cup completely above. (Wheel suspension). Fixture for the upper pin of the wheel hub. Suitable

for Citroen 11CV. Diameter: 52mm. Or. No. 426607

Ball cup down (front axle). Suitable for Citroen 11CV. Diameter: 60mm. Or. No. 426613

M35, rubber stop for the suspension. Suitable for Citroen M35 (Wankel). The front axle has 4

rubbers. You can use this rubber also for the rear axle (with little easy changes). Or. No. AL437-1 + AL437-3

M9x16, screw for the securement of the lateral cover plates at the front axle. Suitable for Citroen

2CV, all years of construction.

Collar for the ball joint, at the wheel hub. Suitable for Citroen DS, SM + HY. Very good

reproduction. Dimension about: 16x79mm. Or. No. ID 5410027F

Nut for the upper pin holder, at the front axle. Suitable for Citroen 11CV. Measurement: M16 x 1,5

Or.Nr.426531

Nut selflocking M10 x 1,25. Suitable for most ball joints at the front axle. Renault R4, R5, R6

R8, R10 etc.

Nut selflocking M12 x 1,25. Suitable for most ball joints at the front axle. Renault R4, R5, R6

R8, R10 etc.

Nylon disk, for the ball pin down + above. Suitable for Citroen DS, up to year of construction

1965. Or. No. D41387B

• Suitable for this article
• 
  Ball pin sealing. Suitable for Citroen DS, to year of construction 1966. Inside
  15,77 €

Nylon disk, for the wheel hub above (9mm). Suitable for Citroen DS, to year of construction 1965

Or. No. D41387A

P 104/VISA/C15/LNA/Talbot/R14, wishbone in front on the left, Peugeot 104, Citroen LNA, C15, VISA

Talbot Samba, Renault R14. Made in Italy

P 203/403, rubber stop front axle (per piece). Height: 60mm. Suitable for Peugeot 203 + Peugeot

403. Or. No. 3514.03

P 203/403, rubber stop front axle (per piece). Suitable for Peugeot 203 + Peugeot 403. Overall

height: 65mm. Or. No. 3514.02

P 203/403, bonded-rubber bushing mounting plate spring in front, Peugeot 203 + 403. Measurements

12 x 54 x 25 x 50mm. Or.Nr.503213

P 203/403, bonded-rubber bushing for the upper wishbone. Mounting above for the shock absorber

Suitable for Peugeot 203 + 403. Measurements: 12 x 44 x 25 x 40mm. Or.No. 524803

P 203/403, bonded-rubber bushing, wishbone fixture. Measurements: Inside 12mm, outside 32mm, length

43mm. Inside 50mm, outside 34mm.

P 204, anti roll bar (torsion bar) rubber. Diameter: 16mm, 42,5x40x38mm. The bracket can also be

used for the 19mm stabiliser. Please then drill out a little accordingly. Suitable for Peugeot 204. Or. No. 5094.04

P 204/304, bonded-rubber bushing A-arm. Peugeot 204 + 304. Measurements: Inside 10mm, outside 34mm

m. Long: Inside 41mm, outside 31mm. Or No. 352311

P 204/304, anti roll bar (torsion bar) fixture (material: Rubber). For anti roll bar diameter

22mm. Suitable for Peugeot 204 Coupe + 304 Coupe, starting from year of construction 03/1972. Or. No. 5094.12.

P 204/304, ball joint down, repair set (front axle). By side. Suitable for Peugeot 204 + 304

Thread: M11x1. Or. No. 3640.07

P 204/504, axle for a-arm. Length: 78mm. Diameter: 14,0mm. Thread: M12 x 1,5. Suitable for Peugeot

204, 504, 505, 604. Or. No. 5249.20