front axle for Alle Alle

R8/R10, rubber bush for the anti roll bar. Suitable for Renault R8 + R10. Inside diameter: 18mm

Outside diameter: 40mm. Overall height: 25mm.

R8/R10/Alpine110, ball and socket joint above, for Renault R8, R10. Alpine A110. Pin height to area

for screwing: 77mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 0996006600

R8/R10/Alpine110, ball and socket joint down, for Renault R8, R10. Alpine A110. Pin height to area

for screwing: 65mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 0996006500

Wheel bolt M12 x 1.25 x 30mm. Suitable for Peugeot 104, 404 (starting from year of construction

1968), 504, 505. Or. No. 3714.20

Wheel bolt M16 x 1.5 x 44mm. Suitable for 203, 403, 404, 504 (commercial motor vehicles). Or. No

3311.09

• Suitable for this article
• 
  Wheel nut M16. Suitable for Peugeot 203, 403, 404, 504 (commercial motor
  3,48 €

Wheel bolt in front (first version), befitting for Citroen 2CV. (the wheel bolts are welded in the

wheel hub).

Wheel bolt in front, suitable for Citroen 2CV. (the wheel bolts are welded in the wheel hub). Made

in Germany.

Wheel bolt, suitable for many Renault (R5, R5 Alpine, R12, R16). Overall length: 38mm. Thread

M12x1,25. The wheel bolt head has a diameter of 18mm and is 5mm heavily. Or. No. 0554732800

Wheel bearing spacer sleeve front. Suitable for Renault R4 (disc brake + front drum brake). Or. No

7705001169.

Wheel nut M16. Suitable for Peugeot 203, 403, 404, 504 (commercial motor vehicles). Or. No. 5405.11

Wheel hub - front wheel bearing housing (mounting for wheel bearing and kingpin). Reproduction

Suitable for left or right. The wheel hub can be fitted to all 2CV6 + 2CV4 and Dyane models with a 72 mm wheel bearing (i.e. not for AK, ACDY, etc.). The wheel hub has no mount for vibration dampers (as on old 2CVs). Or. No. 5502003

Wheel hub shaft seal gearbox side (soft shaft seal), suitable for Citroen DS. Good, soft

reproduction. Dimension about 129.25 x 160.75 x 10mm.

Wheel hub shaft seal wheel side (harder shaft seal), suitable for Citroen DS. Dimension about

129.25 x 160.75 x 10mm.

Wheel hub in front on the left, in the exchange. Suitable for Citroen DS. The wheel hub is repaired

with new ball joints (ball pins) and new wheel bearing. Per piece. Plus 100 Euro Old part deposit. Or. No. 9D5409788U

Wheel hub in front on the right, in the exchange. Suitable for Citroen DS. The wheel hub is

repaired with new ball joints (ball pins) and new wheel bearing. Per piece. Plus 100 Euro Old part deposit. Or. No. 9D5409788R

Wheel plate (wheel hub) in front. Suitable for Citroen 2CV from + the fifties + sixties. 8 teeth

for the drive shaft mounting.

• Suitable for this article
• 
  Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403
  4,17 €

Wheel plate (wheel hub in front). Suitable for Citroen 2CV from the seventies to year of

construction 1990 (For wheel bearings with an outer diameter of 72 mm. Fine splines for the drive shaft mounting.

• Suitable for this article
• 
  Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403
  4,17 €

Friction shock absorber (complete with cap, rubber cap), at the front axle. Suitable for Citroen

2CV starting from year of construction 1955. Reproduction.

• Suitable for this article
• 
  Friction shock absorber - seal, under the locking cap at the front axle
  3,18 €
• 
  Screw M7x16 galvanized
  0,48 €
• 
  Toothed washer M7 galvanized
  0,25 €

Friction shock absorber - seal, under the locking cap at the front axle. Suitable for Citroen 2CV

Or. No.: A436-92

Friction shock absorber - locking cap, at front axle. Suitable for Citroen 2CV. Or.Nr.: AZ43691

• Suitable for this article
• 
  Friction shock absorber - seal, under the locking cap at the front axle
  3,18 €
• 
  Screw M7x16 galvanized
  0,48 €
• 
  Toothed washer M7 galvanized
  0,25 €

Friction shock absorber sheet metal plate (the lower, to the radius arm indicating). Suitable for

Citroen 2CV. Or.Nr.: AM43682

• Suitable for this article
• 
  Friction shock absorber - seal, under the locking cap at the front axle
  3,18 €
• 
  Screw M7x16 galvanized
  0,48 €
• 
  Toothed washer M7 galvanized
  0,25 €

Friction shock absorber rubber cap. Suitable for Citroen 2CV starting from year of construction

1955. Reproduction.

Lubrication nipple cap from synthetic. Color: Red.

Lubricate nipple with M7 thread. Suitable for Citroen 2CV, DS, 11CV, HY, etc.

• Suitable for this article
• 
  Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

Lubrication nipple M8 x 1,25. (Taper lubrication nipple H1, straight). Wrench: 9,0mm.

• Suitable for this article
• 
  Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

Screw for the front axle securement. Suitable for Citroen 11CV. Measurement: M10 x 175. Or.Nr

308453

Radius arm nut down (securement lower radius arm). Suitable for Citroen DS. Or. No. 0D 5410 593U +

D412-4A. Original Citroen, no reproduction (NOS)

Radius arm front left with mounted wheel hub (incl. wheel bearing). Suitable for Citroen 2CV, up to

the year of construction 1990, reproduction. The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 937 + 5502 003

Radius arm front left. Suitable for Citroen 2CV, up to the year of construction 1990, reproduction

The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 937G

• Suitable for this article
• 
  Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings
  21,77 €
• 
  Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews
  3,32 €
• 
  M9x16, screw for the securement of the lateral cover plates at the front axle
  2,93 €

Radius arm front right with mounted wheel hub (incl. wheel bearing). Suitable for Citroen 2CV, up

to the year of construction 1990, reproduction. The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 938 + 5502 003

Radius arm front right. Suitable for Citroen 2CV, up to the year of construction 1990

reproduction. The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 938D

• Suitable for this article
• 
  Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings
  21,77 €
• 
  Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews
  3,32 €
• 
  M9x16, screw for the securement of the lateral cover plates at the front axle
  2,93 €

Radius arm unit in front on the left, in the exchange. Suitable for Citroen DS sedan. Or.Nr

DX41-03B. Plus 100 Euro Old part deposit!

Radius arm unit in front on the right, in the exchange. Suitable for Citroen DS BREAK. Plus 250

Euro Old part deposit. Or. No. DVF 41-03C

Radius arm unit in front on the right, in the exchange. Suitable for Citroen DS sedan. Or.Nr

DX41-03C. Plus 100 Euro Old part deposit!

Swing arm bearing outside (nut side) for the front lower swing arm + swing arm rear. Suitable for

Citroen DS. Dimension: 30 x 62 x 21,5mm. Or. No. ZC 9620049 U + ZC 9629053 U

Swing arm bearing outside. Suitable for Citroen HY. Outside diameter: 100,0mm. Inside diameter

55,0mm. Width : 26,75mm.

• Suitable for this article
• 
  Shaft seal. for the radius arm bearing outside. Suitable for Citroen HY
  7,41 €
• 
  Swing arm bearing inside. Suitable for Citroen HY. Outside diameter: 80,0mm
  49,48 €

Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings are identically

constructed over the total construction period (also for Dyane, AK, AMI, Mehari). They fit for the front axle and for the rear axle. Dimensions: 63.5 x 95 x 17 mm. Or. No. ZC 9620041U

• Suitable for this article
• 
  Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews
  3,32 €
• 
  Radius arm bearing locknut, suitable for Citroen 2CV, Dyane, AK, Mehari, AMI
  7,83 €

Swing arm bearing inside. Suitable for Citroen HY. Outside diameter: 80,0mm. Inside diameter

40,0mm. Width : 24,75mm. Or. No. ZC9620006U

• Suitable for this article
• 
  Swing arm bearing outside. Suitable for Citroen HY. Outside diameter: 100,0mm
  49,48 €

Radius arm bearing set, suitable for Citroen 2CV, Dyane, Ami. Consisting of: 4x radius arm bearing

4x shaft seal radius arm bearing, 2x split pin for radius arm nut.

Radius arm bearing locknut, suitable for Citroen 2CV, Dyane, AK, Mehari, AMI. Measurement: 63 x

150mm. Or. No. AZ414-90

Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews the felt washer

Suitable for all year of construction and all series. (2CV, AK, AZU, ACDY, Dyane, AMI). Measurement: 72 x 95,6 x 7mm. Made in Germany.

Radius arm bearing wrench (1833-T), to the loosening of the crown nut. Particularly produced for

Citroen 2CV.

locking plate for the mounting from the ball pin, at the front axle. Suitable for Citroen HY. Or

No. ZC9441187U. Made in Germany.

Locking plate for the front axle securement. Suitable for Citroen 11CV. Or.Nr. 308259. Made in

Germany.

Locking plate, for a ball joint at the front axle. Suitable for Citroen HY. Or. No. ZC9441181U. Per

piece. Made in Germany.

Rubber mount - silent rubber "Fluidbloc" lower wishbone on front axle. Suitable for Citroen GS from

1973 onwards. Citroen GSA all years of construction. Or. No. 95495152

Silent block for the upper support arm. Suitable for Citroen 15CV. Dimension: 56 x 38 x 36 x 47mm

Or. No. 441433

Shaft seal (high version) for the radius arm. In front + rear fitting. For Citroen DS. Dimension

54 x 72 x 12,5mm. Or. No. D422-95C. Made in Germany.

Shaft seal (low version) for the radius arm in front. Suitable for Citroen DS. Dimension: 54 x 72 x

5,0mm. Or. No. ZC9612620. Made in Germany.

Shaft seal. for the radius arm bearing outside. Suitable for Citroen HY. Dimension: 72 x 100 x

12mm. Made in Germany.