heating and ventilation for Alle Alle
266 Articles | Page 3 of 6
Heating hose from felt, above curved. Suitable for Citroen AZU, to year of construction 07/1972
Citroen 2CV, with 6 V electrical connection. The heating hose is related to a side with vinyl. Optically like original! Or. No. AZ56484B
Heating hose lined (with foam on the inside). Suitable for Citroen 2CV6, 2CV4 + AMI6. Own
reproduction. With aluminium core, making it much more durable! 500 mm long, 90 mm outer diameter, 15 mm foam.
Heating hose above, for Citroen 2CV6+4. length about 225mm. This hose was mounted between the warm
air distributor in the engine compartment and the air duct at the windshield. The hose is isolate with foam material.
Heating hose. Suitable for Citroen HY. Inside diameter: 50,0mm. Length: 1050,0mm. In the Citroen
HY, until year of construction 06/1966, the hose was 880mm long. From the year of construction 7/1966, the hose has been 1020mm long. Please cut to length!
Heating hose set for Citroen 2CV6. Consisting of: 2x heating hose of the heat exchanger into the
interior, 1x heating hose above, between distributor warm air and upper nozzle, 2x exhaust air hose made of rubber! Complete set!
Heating hose set for Citroen 2CV6. Consisting of: 2x heating hose of the heat exchanger into the
interior, 1x heating hose above, between distributor warm air and upper nozzle, 2x exhaust air hose! Complete set!
Heating inlet hose. Mounted between cylinder head and the heater flow control valve. Suitable for
Citroen DS IE. Or. No. DX642-285A
Heating inlet hose. Mounted between cylinder head and the heater flow control valve. Suitable for
Citroen DS, starting from year of construction 1968. Or. No. 26233879D
Heater radiator small (new part). Suitable for Citroen DS, starting from year of construction 1969
Or. No. DX642-211A. An old part return is not necessary!
Heater radiator hose 90°. Suitable for Citroen DS + HY (e.g. old version heater radiator). Leg
length about 25mm both sides. Inside diameter about 12-15mm. Or. No. DF642-79
Heater radiator hose. Suitable for Citroen DS 19. Inside diameter both sides: 12,0mm. Overall
length: about 470mm. Or. No. DS642-55
Heater radiator hose. Suitable for Citroen ID19 from year of construction 09/1968 without electric
fan. Hose from the cylinder head to the heater radiator. Note: This hose does not fit vehicles with electric fans! Or. No. DV642-79
Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Reproduction out of
f painted sheet metal. Or. No. 5403748
Heater hose on the left of Citroen Mehari. Diameter 70mm, 580mm long, isolate with 10mm foam
m material. Heat exchanger to distributor in the front wall.
Heater hose on the right of Citroen Mehari. Diameter 70mm, 490mm long, isolated with 10mm foam
material. Heat exchanger to distributor in front wall.
Heater valve plastic housing (screwed on the heat exchanger). For the repair of the heating flow
control valve. Suitable for Citroen DS, GS Birotor, Peugeot 204/304
Water pipe, from the heater valve to the cylinder head. Suitable for Citroen DS IE (injection
engine), starting from year of construction 1969. Or. No. DX642-209A
Water pipe, from the heater valve to the cylinder head. Suitable for Citroen DS, starting from year
of construction 1968. Or. No. DX642-762D
Water pipe, from the heater valve to the cylinder head. Suitable for Citroen DS, to year of
construction 1968. Or. No. DX642-9B
Water hose. Connection to the heater valve (S-form). Suitable for Citroen DS, of year of
construction 1965 to 1968. Inside diameter both sides: 12,0mm. Or. No. DX642-96A
Water hose, connection to the heater valve. Suitable for Citroen DS, of year of construction 1961
to 1965. Inside diameter both sides: about 18-20,0mm. Overall length about: 270mm. Or. No. DS642-96
Heater valve, complete with spiral. Suitable for Citroen DS, starting from year of construction
09/1968. GS Birotor. The heater valve is a new part. Or. No. DX642-226A
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for both heater cables. Suitable for Citroen 2CV.
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for one heater cable. Suitable for Citroen 2CV.
Heater cable short, suitable for Citroen 2CV, for all years of construction. Installed one between
the heating exchangers in the engine compartment. Depending upon year of construction it can be possible that the cable must be cut.
Heater cable long, for Citroen 2CV6. Mounted at the heater adjustment lever in the interior to the
heating exchanger. Installed one starting from 04/1972. Bowden cable about 1480mm long. Casing about 1250mm. The heater cable is individually shortenable.
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Or.Nr. AZU 644-101
J5/C25. Heater radiator (heat exchanger) suitable for Peugeot J5 + Citroen C25. Installed from year
of construction 10/1985 to 03/1994. Length: 243mm. Wide one: 177mm. Deep 42mm.
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Rocker switch for the heater blower (1 speed). 33x5x19.5mm (installation dimension). Suitable for
many Renault and Peugeot models.
266 Articles | Page 3 of 6
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
