rear axle for Alle Alle

P 403/404/504, bonded-rubber bushing mounting plate spring at the rear axle, Peugeot 403, Peugeot

404 + 404 Pick UP, Peugeot 504 Pick UP. Measurements inside 16mm, outside 32mm. Length inside 54mm, outside 50mm

P 404, rear axle rubber stop. Suitable for Peugeot 404. Or. No. 3514.09

P 404, shaft seal differential. Dimension: 25 x 45 x 8mm. Suitable for Peugeot 404.

P 404/504, bonded-rubber bushing for the anti roll bar ouple rod (rear axle). Suitable for Peugeot

404 + 504. Inside diameter: 10mm. Outside diameter: 27mm. Or. No. 5179.02

P 404/504, Panhard rod + anti roll bar repair set, for the rear axle. Suitable for Peugeot 404

BREAK + Pick UP. Peugeot 504 sedan, Coupe, Cabriolet. 504 BREAK + Pick UP. Bonded-rubber bushing: Ø 12 x Ø 30mm, length 42 x 36mm (5171.01). Screw: M12x70mm (5173.03). Nut M12 (3431.01).

Shaft seal for bearing knockout spindle, Peugeot 404/504. 45x62x10mm, Or.Nr.334510

P 404/504, stud bolt suspension spring rear. M12x1,5. 112mm lengthens. Suitable for Peugeot 404 +

504

P 404/504/505, bonded-rubber bushing, for the fixture plate spring rear axle. Suitable for Peugeot

404, 504, 505. Inside diameter: 16mm. Outside diameter: 32mm. Length inside: 69mm. Length outside: 60mm. Or. No. 5131.39

P 404/504/505, shaft seal (with metal inset) for the wheel hub rear (full-floating axle)

Dimension: 53 x 79 x 10mm. Suitable for Peugeot 404, 504, 505. Or. No. 3345.31

P 504, bonded-rubber bushing for the wishbone (rear axle). Suitable for Peugeot 504 sedan, Cabrio

Coupe. Inside diameter: 16,0mm. Outside diameter: 32mm. Or. No. 5131.17

P 504, bonded-rubber bushing triangle rear axle. Diameter inside: 14mm. Outside diameter: 29mm

Length inside: 44mm. Length outside: 32mm. Suitable for Peugeot 504. Or. No. 3523.12

P 504/505, wheel bolt. Thread: M12 x 1,25. Length of thread: 38mm. Suitable for Peugeot 504 + 505

which have brake disks at the rear axle. Or. No. 3311.13

• Suitable for this article
• 
  P 504, wheel nut. Thread: M12 x 1,25mm. Suitable for Peugeot 504. Or. No
  1,83 €

P 504/505, shaft seal for the differential. Dimension: 45 x 62 x 10,5mm. Suitable for Peugeot 504

sedan + Cabrio (also V6). Peugeot 505. Or. No. 3121.13

P 504/505, anti roll bar rod rear. Suitable for Peugeot 504 Break + 505 Break. Or. No. 5178.05

P 504/505/604, mounting (fixture) rear axle, on the left (rubber metal handle). Dimension: 45 x 69

x 44mm. Suitable for Peugeot 504, 505, 604. Or. No. 5152.16

P 504/505/604, mounting (fixture) rear axle, on the right (rubber metal handle). Dimension: 45 x 69

x 44mm. Suitable for Peugeot 504, 505, 604. Or. No. 5152.17

P 504/505/604, anti roll bar rod, rear axle. Suitable for Peugeot 504 sedan (apart from Luxe), 504

Cabriolet + Coupe. 505 sedan, 604. Length over everything: about 175mm. Or. No. 5178.03

P 504/505/604, Alpine A310. Mounting (fixture) rear axle (rubber metal handle). Dimension: 69 x

40mm. Heavy one: 24/38mm. Suitable for Peugeot 504, 505, 604. Renault Alpine A310. Or. No. 5152.18

R16, rubber for the anti roll bar rear. Per piece. Suitable for Renault R16. Or. No. 0855607800

R16, rear axle radius arm repair set. For both sides. Suitable for Renault R16. Or. No. 0981692400

0981692401

R16, metal sleeve in the radius arm rear, for the mounting of the rubber bushing (83322). Suitable

for Renault R16. Or. No. 0981693200.

• Suitable for this article
• 
  R16, repair set (rubber bearing, per side) for the radius arm bearing rear
  108,09 €

R16, repair set (rubber bearing, per side) for the radius arm bearing rear, inside the rear axle

Suitable for Renault R16. Note: The metal sleeve in the radius arm should be absolutely exchanged. Our number: 84328.

• Suitable for this article
• 
  R16, metal sleeve in the radius arm rear, for the mounting of the rubber
  42,54 €

R16, anti roll bar tie bar, at the rear axle. Suitable for Renault R16. Per piece. Or. No

0833109900

R4, bump stop on the Suspension Arm (old version made of cast metal) of the rear axle. Suitable for

Renault R4. Or. No. 0830045700

R4, fixing screw Torx (6x14), for fixing the brake drum on the wheel hub. Suitable for Renault R4

Or. No. 7703004077

R4, seal for the cover (shell) of the torsion bar mount, centred under the floor pan. Suitable for

Renault R4, R5, R6, Rodeo. Or. No. 770244008 + 0428245200

R4, Torsion bar mounting rear on the right. Finetoothed. Original Renault, no reproduction

Suitable for Renault R4.

R4, Rear axle mounting on the left (with bonded-rubber bushing). Suitable for Renault R4. Case

inside diameter: 49 mm. Inside diameter bonded-rubber bushing: 34 mm.

• Suitable for this article
• 
  R4, Rear axle mounting on the right (with bonded-rubber bushing). Suitable for
  21,72 €

R4, Rear axle mounting on the right (with bonded-rubber bushing). Suitable for Renault R4. Case

inside diameter: 49 mm. Inside diameter bonded-rubber bushing: 34 mm.

• Suitable for this article
• 
  R4, Rear axle mounting on the left (with bonded-rubber bushing). Suitable for
  21,72 €

R4, radius arm mounting inside, at the rear left. Suitable for Renault R4. Or. No. 0832108100

• Suitable for this article
• 
  R4, radius arm mounting inside, at the rear right. Suitable for Renault R4. Or
  98,18 €

R4, radius arm mounting inside, at the rear right. Suitable for Renault R4. Or. No. 0832108200

• Suitable for this article
• 
  R4, radius arm mounting inside, at the rear left. Suitable for Renault R4. Or
  98,18 €

R4, radius arm mounting, at the rear left (radius arm-laterally, triangular with bonded-rubber

bushing). Suitable for Renault R4. Or. No. 0832108100

• Suitable for this article
• 
  R4, radius arm mounting, at the rear right (radius arm-laterally, triangular
  127,93 €

R4, radius arm mounting, at the rear right (radius arm-laterally, triangular with bonded-rubber

bushing). Suitable for Renault R4. Or. No. 0832108200

• Suitable for this article
• 
  R4, radius arm mounting, at the rear left (radius arm-laterally, triangular
  127,93 €

R4, Radius arm holder (cross-beam) at the rear left. With section, of the outer limit cross-beam

(without bonded-rubber bushings)! Suitable for Renault R4. Made in Europe.

• Suitable for this article
• 
  R4, Rear axle mounting on the left (with bonded-rubber bushing). Suitable for
  21,72 €
• 
  R4, Radius arm holder (cross-beam) at the rear right. With section, of the
  69,32 €

R4, radius arm holder (cross-beam) at the rear left. Very good quality. With section, of the outer

limit cross-beam (without bonded-rubber bushings)!Suitable for Renault R4. The sheet metal are galvanically treated with cataphoresis.

R4, Radius arm holder (cross-beam) at the rear right. With section, of the outer limit cross-beam

(without bonded-rubber bushings)! Suitable for Renault R4. Made in Europe.

• Suitable for this article
• 
  R4, Rear axle mounting on the right (with bonded-rubber bushing). Suitable for
  21,72 €
• 
  R4, Radius arm holder (cross-beam) at the rear left. With section, of the outer
  69,32 €

R4, radius arm holder (cross-beam) at the rear right. Very good quality. With section, of the outer

limit cross-beam (without bonded-rubber bushings)!Suitable for Renault R4. The sheet metal are galvanically treated with cataphoresis.

R4, bonded-rubber bushing (2 fittings) for the bearing of the rear axle rocker (per side). Suitable

for Renault R4.

R4, Silent bush (per piece) for the bearing of the rear axle rocker. Suitable for Renault R4

Dimensions ca.: Outer diameter 55mm and 42mm, inner diameter approx. 37,5-38mm, length over all 59mm.

R4, bonded-rubber bushing (per piece) for the bearing of the rear axle rocker. Suitable for Renault

R4. Dimension inside: 27mm. Outside: 45mm. Length: 65mm + 27mm.

R4/R5, bonded-rubber bushing (2 fittings) for the bearing of the rear axle rocker. Suitable for

Renault R4, R5, R6, Alpine A110. Inside diameter: 34mm. Outside diameter: 50mm. Length inside: 45mm. Length outside: 39,5mm.

R5, Rear axle mounting on the left (with bonded-rubber bushing. Suitable for Renault R5. Or. No

77006557. Silent bush: Inner diameter 35.5mm. Outer diameter: 62.0mm. Length bush: 50mm.

R5, Rear axle mounting on the right (with bonded-rubber bushing). Suitable for Renault R5. Or. No

77006558. Silent bush: Inner diameter 35.5mm. Outer diameter: 62.0mm. Length bush: 50mm.

R5, bonded-rubber bushing (2 item) for the rear axle (inside). Suitable for Renault R5 (1 series)

of year of construction 10/1972 to 09/1984. R6 of year of construction 10/1969 to 04/1980. Inside diameter: 34mm. Outside diameter: 50,0mm. Length inside: 45,0mm. Length outside: 39,50mm. Or. No. 0855599000

Wheel bolt rear (in the drum), suitable for Citroen 2CV. Made in Germany!

Wheel bolt M12 x 1.25 x 30mm. Suitable for Peugeot 104, 404 (starting from year of construction

1968), 504, 505. Or. No. 3714.20

Wheel bolt M16 x 1.5 x 44mm. Suitable for 203, 403, 404, 504 (commercial motor vehicles). Or. No

3311.09

• Suitable for this article
• 
  Wheel nut M16. Suitable for Peugeot 203, 403, 404, 504 (commercial motor
  3,48 €

Wheel bolt, suitable for many Renault (R5, R5 Alpine, R12, R16). Overall length: 38mm. Thread

M12x1,25. The wheel bolt head has a diameter of 18mm and is 5mm heavily. Or. No. 0554732800

Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi

professionally. Suitable for the wheel bearing nut in front + rear, and the rear hub nut. (Citroen 2CV)

Wheel nut M16. Suitable for Peugeot 203, 403, 404, 504 (commercial motor vehicles). Or. No. 5405.11