AK400, Rear end panel cross-beam completely, (rear end panel) for Citroen AK400. The cross-beam is
electrolytically galvanized and has 4 holes for the bumper. Wide 1390mm, height outside 85mm, depth 80mm. Ori.Nr. AU832-3. Made in Europe.
Classic car spare parts and accessories - AK40
Reference number(s): AK40
You are currently searching without specifying a vehicle / model.
To give you a better search experience, we recommend that you select your vehicle.
Select vehicle now No thanks
65 Articles | Page 1 of 2
AK400, interior fender at the rear left in the box body (without rear axle stop)! Suitable for
Citroen AK400. Length=1617mm. Or.Nr. AK821-5B. Manufactured in manual work in the European Union.
AK400, interior fender at the rear right in the box body (without rear axle stop)! Suitable for
Citroen AK400. Length=1617mm. Or.Nr. AK821-5C. Manufactured in manual work in the European Union.
AK400, backwall at the rear left in the box body. Suitable for Citroen AK400. Very high quality
With all threads, reinforcement cross-beam, cable harness locking collars. Like original. Overall length: about 128,5cm. Made one by "Der Franzose".
AK400, backwall at the rear right in the box body. Suitable for Citroen AK400. Very high quality
With all threads, reinforcement cross-beam, cable harness locking collars. Like original. Overall length: about 128,5cm. Made one by "Der Franzose".
AK400, square profile (square cross-beam) on the left, centrically, lengthwise over the box body
Suitable for Citroen AK400. Made in Europe.
AK400/ACDY, rear end panel for Citroen AK400 + ACDY. It is only the rear sheet metal of the
cross-beam, not the whole cross-beam. 4 holes for the bumper securement. Made in Europe.
AK400/ACDY, square profile (square cross-beam) on the right, centrically, lengthwise over the box
body. Suitable for Citroen AK400 + ACDY. Made in Europe.
AK400/AZU, backwall centrically over the tail gates, in the box body. Suitable for Citroen AK400 +
AZU. The sheet metal does not have a license plate mounting! Very good processing. Inclusive sheet metal brackets for the cable harness, rainwater gutter, cross-beam etc. Made by "Der Franzose". Made in Europe.
AK400, floor pan on the left, for Citroen AK400. Good reproduction with all flanges. The floor pan
is electrolytically galvanized. Made in Europe.
AK400, floor pan on the right, for Citroen AK400. Good reproduction with all flanges. The floor pan
is electrolytically galvanized. Made in Europe.
AK400, tail gate on the left, reproduction. Suitable for Citroen AK400. The door is
electrolytically galvanized! Made in Europe.
AK400, tail gate on the right, reproduction. Suitable for Citroen AK400. The door is
electrolytically galvanized! Made in Europe.
AK400, body New! Suitable for Citroen AK400. Only pickup, no shipping! The body has been completely
rebuilt from new parts. The quality of the body is good, but small refinishing work is needed. Some welding spots need to be reground and the transition to the windshield frame should be tinned. The raw sheets (before processing and forming) are galvanised. New: Each body is now supplied with a series of photos (via QR code) showing the correct fit, as the body is always test-fitted with original sheet metal parts. Made in Europe. Please note: the body is supplied without front doors and without rear doors!
Chassis AK400/350, reproduction, looks like original. Suitable for Citroen AK400 + AK350 (2CV van)
The chassis does not have TÜV (homologation) papers. Made in Europe. The chassis is visually and technically the same as the original chassis! The chassis are powder-coated!
Door seal, metal strip which hold the rubber seal, down in the front door, for Citroen 2CV. This
strip fits on the left + on the right, and also to the AK400 doors rear. Length: About 780-800mm.
AK, cross-beam crosswise rear, under the box body, for Citroen AK400, AK350. Overall length: 965mm
width: 110mm, height 60mm. Or. No. AK832-73
AK 400, cross-beam crosswise in front, under the box body (direct behind the driver's cabin)
Sutiable for Citroen AK400, AK350, AK250. Or.Nr. AK832-82A
AK, cross-beam under the baggage compartment floor. Suitable for Citroen AK400, AK350, AZU250. (in
the height of the spare wheel fixture). Or.Nr. AK832-81
AK/ACDY, spare wheel cover with mounted lock, suitable for Citroen AK400 + ACDY. Large corrugated
sheet metal. Made in Europe.
AK/ACDY, reinforcing plate in the tail cross-beam, for the mounting of the bumper. Suitable for
Citroen Ak400, ACDY. Made in the European Union.
Label additional load for AK400 until 1975. The set consists of individual letters! The inscription
was outside appropriate at the 2CV van!
Turn signals - Decorative rings for the front turn signals (2 pieces), for Citroen 2CV. Also
suitable for the rear lights Citroen AZU, AK400, DS Break, HY, AMI6. Attention, the trim rings only fit on lights of the manufacturer "AXO". The Seima lamps are too flat. Own reproduction. Anodised aluminium.
Indicator complet (Reproduction, without "E" test mark), without fender fixture! Suitable for
r Citroen 2CV in front, DS BREAK rear, AK400 rear, AMI6 rear, HY rear, Mehari in front + rear. Version: AXO
Brake shoes mounting set in front, suitable for Citroen AK400, ACDY, Mehari, AMI6 (large drum in
front, 220mm diameter). Scope of delivery: 4x locking pin with spring + plates.
65 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
