brake line prefabricated and hydraulic lines for Citroën 2CV ACDY

Brake line + fuel line fixture. Mounted laterally at the chassis. Suitable for Citroen 2CV4 + 2CV6

(Vehicles with light brake lines. 3,75mm). Reproduction, optically and technically like original.

Brake line and petrol pipe clamp made of metal, to be screwed on. Suitable for Citroen 2CV6, 2CV4

Dyane4+6, AK, ACDY, Mehari, AMI. This metal clamp is simply mounted with a screw. It can be used to attach the brake line and the petrol line at the same time. Older 2CVs up to the 1970s also had the clamp mounted on the chassis from above (1x behind the headlight carrier for the petrol line) and 1x below the main brake cylinder on the chassis (for the brake line).

Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV

Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!

• Suitable for this article
• 
  Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer
  58,41 €
• 
  Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer
  163,53 €

Brake line from high-grade steel. Connection from the right brake caliper to the left brake

caliper. Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Brake line from high-grade steel. Connection of that 3 path link to the left rear wheel brake

cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Brake line from high-grade steel. Connection of that 3 path link to the right rear wheel brake

cylinder (spiral in the rear axle tube). Brake system LHM. Suitable for Citroen 2CV6 starting from year of construction 1981 (vehicles with disc brake in front). Corresponds to DIN EN 10217 /05.05, TCI

Brake lines + hydraulic line connectors, for lines with 3.5 - 3.75 mm diameter. Thread on both

sides: M8x1.25. Optimal if 2 lines are to be connected to each other.

• Suitable for this article
• 
  Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS
  0,49 €
• 
  Clinch screw, for 3,5mm - 3,75mm braking or hydraulic line. Thread: M8
  0,75 €

Brake pipe seal + hydraulic line seal (socket) green. For LHM (green hydraulic fluid), 3,75mm line

(connector 8mm). Suitable for Citroen 2CV6 (for the brake hoses), Installed starting from year of construction 1981 (2CV with disc brake). Citroen DS, GS, CX, etc. for hydraulic lines.

Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic

fluid), 3,75mm line (connector 8mm). Suitable for Citroen 2CV (for the brake hoses), Installed to year of construction 1981 (2CV with drum brake in front). Citroen DS to year of construction 1967, for the hydraulic lines.

Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear

brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.

Brake hose seal + hydraulic line seal (socket) green. For LHM (hydraulic fluid green), 4,5mm line

(connector 9mm). Suitable for Citroen DS, HY with hydraulics, GS, CX etc.

Hydraulic hose rubber 4.5 mm LHS (red) + normal brake fluid DOT3 + DOT4. Top quality (new improved

reproduction made from EPDM). Suitable for Citroen DS with LHS hydraulic system, Citroen HY + 2CV, AMI with 4.5 mm brake line (9 mm screw connection).