Citroen-2CV / ACDY / transmission

Axle for the gear wheel of the reverse gear. Suitable for Citroen 2CV6, Dyane, Mehari.

Quality: 3

Drive shaft 2CV, oil seal on gearbox. Suitable for Citroen 2CV6 + 2CV4, Dayne, AK, Mehari, on which the drive shaft flange is fixed with 6 bolts (i.e. all vehicles with disc brakes and the latest model years with drum brakes). Vehicles with 4 bolts need the oil seal 12294. Size: 31 x 42 x 8mm. Made in Germany.

Quality: 3

Seal for drive shaft flange case at the gearbox. Suitable for Citroen 2CV4 + 2CV6 starting from year of construction 1961). The seal is out of paper. Or. No. AT the 33186A

Quality: 3

Gearbox oil screw + filler plug. Thread M16. Suitable for Citroen 2CV.

Quality: 3

Gearbox lid (cap) rear (with mounting for a reversing lamp switch). Suitable for Citroen 2CV6, Dyane. Or. No. 96995255

Quality: 3

• Suitable for this article
• Switch for the reversing lamp. Suitable for Citroen 2CV6. This switch is as substitute for the
  14,77 €

Gearbox bearing for Citroen 2CV. Measurement: 56x16mm. Or. No.: ZC9620224.

Quality: 4

Gearbox Oil addetive, 20g. Suitable for 1 liter transmission oil. This additive has been specially developed for manual and differential transmissions. The product significantly reduces wear and reduces temperature peaks which means quieter running, softer gear changes and better fuel-efficiency.

Quality: 1

Transmission shaft for 2nd + 3rd gear (with sliding sleeve). Suitable for 2CV6, Dyane6, AK400, Mehari. Or. No. AZ335-01B

Quality: 3

Bearing for drive shaft, in gearbox. Suitable for Citroen 2CV6. Dimension: 25 x 52 x 15mm. The bearing is behind the oil seal. Original SKF. Our bearing has a groove for a circlip, but can also be mounted without.

Quality: 2

Bearing gearbox - main shaft for 2CV. Measurements: 20x42x8. Manufacturer SKF.

Quality: 2

Bearing gearbox - main shaft front, for 2CV. Original SKF. Measurement: 25x52x15mm, with groove for retaining ring. Or.Nr.: ZC9620002U

Quality: 2

Bearing primary shaft rear, reproduction. Suitable for Citroen 2CV6. Inside diameter: 20mm, outside diameter: 52mm, 57mm, overall height: 15mm, depth to stop in the case: 11,5mm. Or.Nr. ZC9620308

Quality: 3

Bearing primary shaft, for Citroen 2CV6. Or. No.: 95572590. Reproduction. Dimension: 20x52x57x22mm. Depth gauge to bead seat wreath/ring: 19,00mm.

Quality: 3

M9, stud bolt, for the mounting of the drive shaft at the gearbox. Suitable for Citroen 2CV + Citroen DS. Measurement: M9x42mm.

Quality: 3

• Suitable for this article
• M9, nut M9x1,25. For example mounting drive shaft at the gearbox for 2CV. Amount: 9mm.
  1,83 €
• Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

Nut in front for the layshaft, in the gearbox. Suitable for Citroen 2CV4+6.

Quality: 3

Needle bearing suitable for the primary shaft, for Citroen 2CV, Inside diameter: 14,5mm, outside diameter: 20mm. Height of 26,5mm. Or.Nr. ZC9620373

Quality: 2

Needle bearing gearbox, suitable for Citroen 2CV. Measurement: 29.5 x 33.5 x 18,2mm. Or.Nr. ZC9620361

Quality: 3

Needle bearing between jackshaft + sliding sleeve 4th gear. Suitable for Citroen 2CV6. Dimension: 19 x 23 x 17mm.

Quality: 2

Needle bearing cage, for transmission shaft. Suitable for Citroen 2CV6. Per piece. Or.Nr.26202299

Quality: 3

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

Quality: 3

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot + Renault.
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

Quality: 4

• Suitable for this article
• Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, mea
  0,48 €
• Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
  31,14 €
• Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw, measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Quality: 3

Primary shaft (new), suitable for Citroen 2CV6 (disc brake). Not suitable for Citroen Dyane + Mehari. Or. No. AM332 1E

Quality: 3

Switch for the reversing lamp. Suitable for Citroen 2CV6. This switch is as substitute for the original switch, which was mounted in the rear cap of the gearbox (not with all models!). Note: The switch must be mounted with the attached distance disk! Thread M14x1,5

Quality: 3

Gear lever collar, mounts on the gearbox. Suitable for Citroen 2CV6.

Quality: 3

Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for Citroen for 2CV6. Size: 11,9x18x4mm. Or. No. 95495074. Made in Germany.

Quality: 3

Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for Citroen for 2CV6. Size: 12x18x3mm. Or. No. 7903078053. Made in Germany.

Quality: 3

• Suitable for this article
• Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitabl
  9,82 €

Check ring gearbox for 2nd + 3rd gear. Suitable for Citroen 2CV6. Per piece. Diameter: 29,5mm. Or.Nr.: A33590A

Quality: 2

Check ring gearbox for 4th gear. Suitable for Citroen for 2CV6. Per piece. Diameter: 32mm. Or.Nr.: AM33590

Quality: 4

Synchronisation unit for the 2nd + 3rd gear. Suitable for Citroen 2CV6. Or.Nr. AZ 335 02

Quality: 2

Synchronizer in the gearbox. Suitable for Citroen 2CV. External dimensions: 44,6mm. Heavy one: 8,5mm.

Quality: 4

Speedometer cables bush (guide speedometer cable) in the gearbox, suitable for 2CV6. Reproduction.

Quality: 3 360°

• Suitable for this article
• 2CV6, speedometer pinion in gearbox. 16 theeth! The pinion has an outside diameter of 20,7mm, t
  26,68 €
• Screw for the securement of the speedometer cable in the gearbox. (M7x50mm). Suitable for Citro
  0,79 €

Speedometer pinion driving worm (4 turns). Suitable for Citroen 2CV6, Dyane 6, ACDY, Mehari. Or. No. AT 381 3A

Quality: 3

• Suitable for this article
• 2CV6, speedometer pinion in gearbox. 16 theeth! The pinion has an outside diameter of 20,7mm, t
  26,68 €

2CV6, speedometer pinion in gearbox. 16 theeth! The pinion has an outside diameter of 20,7mm, the shank has a diameter of 8mm.

Quality: 3

• Suitable for this article
• Speedometer cables bush (guide speedometer cable) in the gearbox, suitable for 2CV6. Reproducti
  13,78 €
• Screw for the securement of the speedometer cable in the gearbox. (M7x50mm). Suitable for Citro
  0,79 €
• Speedometer pinion driving worm (4 turns). Suitable for Citroen 2CV6, Dyane 6, ACDY, Mehari. Or
  13,78 €

Identification plate green, for Citroen. 78x40mm. 2 bores. (Metal). The green identification plates were often used for gearbox identification!

Quality: 3

Guide sleeve in the gearbox, for the connection engine + gearboxes. For 2CV. Measurement: 10x14x27,5mm

Quality: 4 360°

Guide sleeve in the gearbox, for the connection engine + gearboxes. For 2CV. Measurement: 10x14x27,5mm. Very good after production from the European Union.

Quality: 3 360°

Nut M10, for the stud bolt for connection engine and gearbox. Suitable for Citroen 2CV, Dyane, Ami.

Quality: 3

Stud bolt long, between engine + gearbox. Suitable for Citroen 2CV6 + 2CV4.

Quality: 3 360°

• Suitable for this article
• Nut M10, for the stud bolt for connection engine and gearbox. Suitable for Citroen 2CV, Dyane,
  0,50 €

1 gearGear wheel gearbox, for the 1 gear + reverse gear. Suitable for Citroen 2CV6. Diameter: 87mm. 31 teeth

Quality: 3